A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 42

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

- Take maintainership

Reset sergei@ due to maintainer-timeouts and no response to email.

Hat:            portmgr

 - Update to 2.0.4.
 - "WANT_FAM_SYSTEM=fam" might have been too restrictive,
   so remove it.

Submitted by:   KIMURA Yasuhiro <yasu utahime org>
PR:             ports/112201
Approved by:    maintainer timeout

- Update to 2.0.3
- Explicitly require fam rather than gamin

PR:             ports/110211
Submitted by:   KIMURA Yasuhiro (yasu AT utahime DOT org)

Remove USE_GPG from all effected ports. This knob is a no-op and the way it
was supposed to work is useless, because if we can't trust the distfile from
the remote machine, we can't trust the signature from the same machine either.
Our MD5 and SHA256 are good for checking both the sanity and the
trustiness of distfiles.

Approved by:    portmgr (erwin), erwin (mentor)

- Update to 2.0.2
- Install quotawarnmsg.sample file [1]
- Add WITH_FAM knob to explicitly enable optional support for FAM
  in addition to autodetecting its presence; utilize USE_FAM for dependency
  (choose between devel/gamin and devel/fam according to user's preference)

PR:             ports/95169 [1]
Submitted by:   Rui Lopes <rgl@ruilopes.com> [1]

[PATCH] mail/maildrop: Update to 2.0.1

        Update to latest release version 2.0.1.

PR:             ports/90915
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>

chase courier-authlib move

- Add patch to work around the problem where maildrop exits with
  "flock() failed" error when an attempting to route messages to /dev/null.
  Patch is submitted upstream.
- Bump PORTREVISION

PR:             ports/80106
Submitted by:   David Lay <dsl@webize.com.au>

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Fix MAILDROP_SUID/SGID - Maildrop was installed without suid/sgid bit
  even if MAILDROP_SUID/MAILDROP_SGID option is set - fixed
  NOTE: this changes behavior of these options so that suid/sgid bit
        is set only if these options are explicitly specified.
        There is no default value for these options now.
- Bump PORTREVISION

PR:             ports/78715
Submitted by:   KIMURA Yasuhiro <yasu@utahime.org>

Near miss (USE_GMAKE for releases up to and *including* 5.2.1-RELEASE).

- Fix WITH_AUTHLIB=yes case by patching LIBS in Makefile.in [1]
  (adds -rpath=${LOCALBASE}/lib/courier-authlib). Unlike the previous
  solution (add it to LDFLAGS) this does work

PR:             ports/77874
Submitted by:   Thomas T. Velhdouse <veldy@veldy.net> (error report)
Obtained from:  Douglas Fraser <doug@idmf.net> [1] (actual fix)

make(1) in 5.2.1-RELEASE can't handle the generated Makefiles either.

- Build fails under RELENG_4 unless USE_GMAKE=yes.
  Make it conditional on OSVERSION since RELENG_5 and HEAD
  does not have that problem

Noticed by:     KIMURA Yasuhiro <yasu@utahime.org>

- Update to the latest version - 1.8.0
- Maildir quota is now enabled by default.
  The following options were deleted:
  - WITH_MAILDIRQUOTA
  - WITH_TRASHQUOTA
- New option WITH_AUTHLIB is added, which provides optional support for
  Courier Auth Library (mail/courier-authlib port).
- Userdb authentication, LDAP and MySQL support are provided through
  courier-authlib now, thus the following options
  - WITH_USERDB
  - WITH_LDAP
  - WITH_MYSQL
  have been superceded by WITH_AUTHLIB.

WARNING! WARNING! WARNING!

(Only the first 15 lines of the commit message are shown above )

- Add two new knobs:
  WITH_TRASHQUOTA=yes   Include deleted messages, and the Trash folder,
                        in the estimated quota usage for maildirs.
                        Requires WITH_MAILDIRQUOTA. [1]
  MAILDROP_TRUSTED_USERS=<user> Specify users allowed to use the -d option [2]
- Bump PORTREVISION

PR:             ports/68077 [1], ports/65520 [2]
Submitted by:   Rui Lopes <rui@ruilopes.com> [1],
                Mantas Kaulakys <mantas@stotis.lt> [2]

typo

- Support sourcing of Makefile.local by including <bsd.port.pre.mk>
  even though I think there are better ways to store per-port configuration:
  sysutils/penv or sysutils/portupgrade ports or /etc/make.conf file)

PR:             ports/64660
Submitted by:   George Hartzell <hartzell@kestrel.alerce.com>

- Update to 1.6.3
- Remove patched we do not need anymore
- Disable database extensions by default;
  use WITH_GDBM knob to enable them [1]
- Add WITH_USERDB knob to enable userdb authentication [1]
- Add WITH_LDAP knob to enable virtual user LDAP support [2]
- Add WITH_MYSQL knob to enable virtual user MySQL support [3]
- Use DOCSDIR in pkg-plist
- Re-word/clarify pkg-descr

PR:             58968 [1], 56329 [2], 59807 [3]
Submitted by:   oleg dashevskii <be9-ml@be9.ru> [1],
                Paul Dlug <paul@aps.org> [2],
                Harold Paulson <haroldp@internal.org> [3]

- Take maintainership

Relinquish maintainership to ports@.

Specify /usr/sbin/sendmail (mailwrapper) as the default sendmail binary
to use by default now, unless the user specifies NO_MAILWRAPPER.

Submitted by:   Thomas Seck <tmseck@netcologne.de>

- update to 1.5.2
- document port options at the top of the Makefile
- install documentation

PR:             49974
Submitted by:   Sergei Kolobov <sergei@kolobov.com>

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

chase gdbm lib version

Port needs perl to run and build -> USER_PERL5=yes

PR:             ports/46357
Submitted by:   Christopher Sharp <csharp@gmx.net>

Update to 1.5.0.

PR:             44746
Submitted by:   Nick Hilliard <nick@foobar.org>

Add a MAILDROPDEFAULT knob to be more consistent with mail/courier's
behaviour.

PR:             40059
Submitted by:   Kimura Fuyuki <fuyuki@hadaly.org>

Update to 1.3.8.

Update to 1.3.7    

Update to 1.3.6.    

Change my email address to petef@FreeBSD.org for the ports I maintain.    

Update to 1.3.4   Reorder MAN pages    

Update to 1.3.3   Check for WITHOUT_GDBM instead of NO_GDBM   Make
configure_args append to existing args instead of replacing    

Upgrade, re-organize PORTDOCS, change the maintainer.   PR: 27406   Submitted
by: new maintainer <petef@databits.net>   Approved by: previous mainainer <tom> 
  

Fix typo (SGIG -> SGID) and update my address in MAINTAINER    

Update port to version 1.3.0.    

Spaces->tabs in the mail category.    

Rename PLIST.{docs,gdbm} to pkg-plist.{docs,gdbm}.    

Number of commits found: 42

19 vulnerabilities affecting 36 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities