A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 46

- Fix pkg-install to create initial aliases correctly, broken when was rewritten
from csh to sh
- Bump PORTREVISION from all slave ports

Register CONFLICTS between qmail master and all slave ports

Update qmail-ldap to 20060201

Approved by:    portmgr (linimon)

Remove CONFLICTS with nss.

- Fix 'all-depends-list' target in cases if dependencies list is
  very long and if some dependencies can't be added into the list.
  [1]

- Fix FAM support.  Make gamin the default FAM system. [2]

- Introduce new 'quicksearch' target to show only port, path and
  info section of the matching ports. [3]

- Introduce new category - rubygems. [4]

- Fix stale dependencies while installing qmail slaveport and
  another port that depends on qmail. [5]

- Add commentary for describes target in bsd.port.mk. [6]

(Only the first 15 lines of the commit message are shown above )

Change MAINTAINER to my @FreeBSD.org account

Approved by:    flz (mentor)

Add ucspi-tcp as a dependency, it's needed to make .cdb files.

PR:             82801
Submitted by:   Renato Botelho (maintainer)

- Bump PORTREVISION to take latest qmail changes into account.

PR:             ports/82698
Submitted by:   maintainer

- Update ldap patch to 20050401a
- Add sysutils/daemontools to RUN_DEPENDS because the new patch works
  just with it
- Change pkg-message to reflect qmail.schema file installation
- Change pkg-descr to reflect new features

PR:             ports/81966
Submitted by:   Renato Botelho <freebsd@galle.com.br> (maintainer)

- Transfer all work to MASTER port and make slave ports easier
- Use only one pkg-plist and use PLIST_SUB
- Use DOCSDIR intead of DOCDIR
- OPTIONS'ify
- Remove WITH_PRESERVE_CONFIG_FILES knob and detect automatically when is need
  to create it.
- Add $FreeBSD$ tag to pkg-plist and pkg-install
- Fix error on enable-qmail script
- Remove MASTER_SITE_QMAIL definition from Makefile since it's defined on
  bsd.sites.mk
- Add a new option to don't create rc.d/qmail.sh
- Add rc.d/qmail.sh to pkg-plist when necessary

PR:             ports/80833
Submitted by:   maintainer
Thanks to:      novel, Joao Ricardo P. Mendes <joao@redepegasus.com.br>

o Pacify a lot of portlint WARN and FATAL messages
o Change ${PERL} to ${SED} or ${REINPLACE_CMD}
o Added patch patch-qmail-1.03-rfc2821.diff to search other MX servers
  when the first return a code > 500 and < 599
o Install mkaliasdir script on ${PREFIX}/scripts directory
o Remove targets to disable-qmail and enable-sendmail and put it on a
  shell script that is installed on /var/qmail/scripts. Change messages
  reflect this.
o Organize better pkg-plist
o Remove thereal-post-patch target and put all on post-post-patch target
o Add [0-9] to CONFLICTS on qmail-ldap port
o Change LIB_DEPENDS to USE_MYSQL=yes on qmail-mysql port
o Change qmail-spamcontrol to don't need more to apply patches mannualy

PR:             ports/79094
Submitted by:   maintainer

Give maintainership to Renato Botelho <freebsd@galle.com.br> who
has been submitting outstanding PRs for all qmail ports I have been
maintaining up to this moment. They will be in good hands.

- Add (or fix) CONFLICTS line. The ports install bin/digest.

Approved by:    portmgr (krion)

o Fix PLIST
o Therefore, both remove BROKEN and bump PORTREVISION

BROKEN: Incorrect pkg-plist

Remove all openldap{1,2} port references in favor of USE_OPENLDAP

Reminded by:    eik

o Fix WITH_CLEARTEXTPASSWD knob
o Bump PORTREVISION since this is an important option

PR:             50694
Submitted by:   Chris Shenton <cshenton@Palimpsest.saic.hq.nasa.gov>

Remove redundant USE_PERL5_BUILD, already declared in MASTER port

Define USE_PERL5_BUILD, not erroneous USE_PERL.

Submitted by:   Oliver Eikemeier

Define USE_PERL to make Perl available for (mostly deprecated)
"perl -pi -e" construction.

Switch to openldap20 instead of openldap12 since the later is about
to be marked as BROKEN (and, thus, possibly removed)

PR:             57402
Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Fix non-default dependency on openldap2[012] which is broken by splitting.

# I'm not bumped port revision of them because this should not affect
# packages built on bento...

Prepare for upcoming WITH_OUTGOINGIP_PATCH option in master port.
Do not allow this option in these ports since it conflicts with
both -ldap and -tls patches

Point dependencies on net/openldap2 to net/openldap20

Point dependencies on net/openldap to net/openldap12

De-pkg-comment

Convert COMMENT to COMMENTFILE until these ports can be converted.

Submitted by:   lioux

Update to qmail-ldap patch version 20020901

Update to qmail-ldap patch version 20020501a

o Fix breakage introduced in last rev:
- Comma operator does not work for {DIST,PATCH}FILES just yet,
  re-arrange groups to achieve similar effect

o Both sanitize MASTER_SITES and add additional ones
o Full deployment of MASTER_SITES:n

o Update to patch level 20011001a   o Allow choice of either openldap or
openldap2 (WITH_LDAP2)   o Add WITH_DASH_EXT option   o Add a pointer in
PKGMESSAGE to Reviewer's how-to on FreeBSD+qmail-ldap    

Update to qmail-ldap patch version 20010501    

o Update to qmail ldap patch version 20010301   o New defaults: TLS,
LDAP_CLUSTER, AUTOMAILDIRMAKE, AUTOHOMEDIRMAKE   o Modify options WITH ->
WITHOUT due to new defaults   o Fixes:   	- added 0.0.0.0 patch   	- fix
qmail-lspawn 'Out of memory' error when attempting   	  local delivery to a
nonexistant user   	- handle precedence flag in the right way   	- fix for
qmail.schema mailReplyText   	- fix for ldaptimeout to just defer message
delivery instead   	  of bouncing sometimes    

* qmail port   o bump PORTREVISION   o sanitize MASTER_SITES   o added several
flags (defined checks) to enable   active slave port control on what they
inherit   o add extra enhancement patches, these can be   inherited too:   	-
WITH_QMAILQUEUE_PATCH: qmailqueue-patch   	- WITH_BIG_TODO_PATCH:
big-todo.103.patch   	- WITH_BIG_CONCURRENCY_PATCH: big-concurrency.patch   		-
WITH_BIG_CONCURRENCY_PATCH_CONCURRENCY_LIMIT   		default: 509   o add patches
checksum to distinfo   o added MASTER_SITE_QMAIL for internal use   o additional
copies of slave qmail patches are now housed   at MASTER_SITE_LOCAL,
PATCH_SITE_SUBDIR=lioux because   these patches only have ONE PATCH_SITES source
each   	- qmail-ldap-1.03-20010201.patch.gz (qmail-ldap)   	-
qmail-mysql-1.1.1.patch (qmail-mysql)   	- tls.patch (qmail-tls)   o turn all
absolute references to both binaries and   FreeBSD configuration files into
VARs: better   maintability   o s/yetanotherone-/slaveport-/: that is the
correct   nomenclature   o ${LN} should use -sf instead of plain -s   o typo
fix: QMail -> qmail    

Have slave ports correctly inherit PREFIX from master port qmail    

Be sensitive about repo bloat    

Update to qmail-ldap patch version 20010201    

Spaces->tabs in the mail category.    

Add yet another WITH option to qmail-ldap. This time a WITH_LDAP_DEBUG   option
for those in pursue of enlightment.    

Updated to latest patch level version 20001201   Also, added some WITH_* user
options    

qmail's license terms regarding precompiled distribution   does not seem to
allow packaging this port. Add NO_PACKAGE   with appropriate information.    

Change PATCHDIR from patches/ to files/.  Also change PKGDIR (pkg/ to   .) and
other pkg variables if they are nearby.    

Maintainer is now a committer, update email accordingly    

Update qmail-ldap 1.03.20000701, and share logic in qmail port, and some   other
minor tweaks.    

New port following the apache structure port naming convention. This   one
builds qmail with ldap support using http://www.nrg4u.com/ patches.    

Number of commits found: 46

14 vulnerabilities affecting 30 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities