A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 116 (showing only 100 on this page)

1 | 2  »  

fix NOPORTDOCS installation

Noted by:       itetcu

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

change MASTER_SITES

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Chase pilot-link's shared library version bump. Bump the PORTREVISION. As for
the PRs, I shall chase and close a few of them.

Pointyhat:      ijliao

Update gpgme to 1.1.2, chase dependencies.

Remove USE_REINPLACE from ports starting with M

fix MASTER_SITES

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

update to 1.0.6

Chase gpgme update
Bump PORTREVISION

Pointy hat to:  lofi

switch NO_LATEST_LINK since sylpheed 2.0 is the new stable branch

update to 1.0.5

remove EXTRACT_ONLY and DIST_SUBDIR

PR:             ports/79074
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>

add dependency to misc/mime-support instead of installing its own mime.types

PR:             ports/79074
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>

update to 1.0.4 for security purposes

Approved by:    portmgr (krion)

update to 1.0.3

update to 1.0.2

update to 1.0.1

- Rework gpgme03 port to avoid conflict with gpgme 1.0
- Make ports depending on it use new layout
- Bump PORTREVISION (except elmo*)

Approved by:    portmgr (marcus)

- Fix dependency when WITH_GPGME is defined

Forgotten by:   marcus

update to 1.0.0.r.1

update to beta4

update to beta3

update to 1.0.0.b.2

update to 1.0.0.b.1

update to 0.9.99

fetch & Install sylpheed-mime.types to send attached Files with a propper
mime-type declaration.

Noted By:       Bill Moran <wmoran@potentialtech.com>

update to 0.9.12

Once more a new cache version - give it time to regenerate it after you
first entered an folder with that version.
There should/is no need to remove .sylpheed_cache files manually.

update to 0.9.11

- Utilize USE_ICONV

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

uptdate to sylpheed 0.9.10

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

revert the last change. gtk depends on gettext-old, and gettext+gettext conflict
each other.
Bump PORTREVISION

Noted By:       Sperber <sperber@gmx.at>

update gettext dependency
Bump PORTREVISION

Suggested By:   nork

update sylpheed to 0.9.9

Now gettext 0.12.1 is gettext-old.

update sylpheed to 0.9.8.1 (0.9.8a)

update sylpheed to 0.9.8

utilize USE_OPENLDAP

bump PORTREVISION

Does not use the included version of libintl, use the one which is provided
by gettext.
PR:             ports/58441
Submitted By:   Simon Barner <barner@in.tum.de>

update to 0.9.7

Move USE_* above bsd.port.pre.mk.

PR:             57502
Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

update sylpheed to 0.9.6

Fix non-default dependency on openldap2[012] which is broken by splitting.

# I'm not bumped port revision of them because this should not affect
# packages built on bento...

update sylpheed to 0.9.4

update sylpheed to 0.9.3
replace hardcoded share/doc/sylpheed with %%DOCSDIR%% in pkg-plist

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

update sylpheed to 0.9.2

update sylpheed to 0.9.1

Update sylpheed to 0.9.0

Approved by:    alex (mentor)

update sylpheed to 0.9.0pre1

Approved by:    alex (mentor)

redefine the MAINTAINER field with my FreeBSD address

Approved By:    alex (mentor)

USE_IMLIB is deprecated. Switching all USE_IMLIB references to appropriate
USE_GNOME= imlib directives.

Update to 0.8.11.

PR:             ports/49021
Submitted by:   Oliver Lehmann <lehmann@ans-netz.de> (maintainer)

Point dependencies on net/openldap2 to net/openldap20

De-pkg-comment.

Update to 0.8.10.

PR:             47898
Submitted by:   Oliver Lehmann <lehmann@ans-netz.de> (maintainer)

use iconv instead of libjconv.

PR:             ports/47701
Submitted by:   KAWATA Masahiko <kawata@mta.biglobe.ne.jp>
Approved by:    Oliver Lehmann <lehmann@ans-netz.de>

Update to 0.8.9

PR:             47178
Submitted by:   Oliver Lehmann <lehmann@ans-netz.de>

Update to 0.8.8

PR:             46561
Submitted by:   Oliver Lehmann <lehmann@ans-netz.de> (maintainer)
Reviewed by:    Miguel Mendez <flynn@energyhq.homeip.net>

Maintainer update.

- move the manual to a proper location ($DOCSDIR
  [/usr/X11R6/share/doc/sylpheed] instead of /usr/X11R6/share/sylpheed)
- install manual and faq only if NOPORTDOCS isn't specified

PR:             45654
Submitted by:   maintainer

Update to 0.8.6

PR              45310
Submitted by:   maintainer

Use bsd.port.(pre|post).mk

PR:             38616
Submitted by:   KAWATA masahiko <kawata@mta.biglobe.ne.jp>
Approved by:    Oliver Lehmann <lehmann@ans-netz.de> (maintainer)

Update to 0.8.5

PR:             ports/43628
Submitted by:   maintainer

upgrade to 0.8.3

PR:             42838
Submitted by:   maintainer

bump gpgme shlib version

Chase the pisock shared lib version number.  Note, this new version may
break some of these ports, but they're definitely broken without this.

Update to version 0.8.2

PR: 42044
Submitted by: MAINTAINER

Update to 0.8.1

PR:             ports/41014
Submitted by:   maintainer

Update to 0.8.0

PR:             40550
Submitted by:   maintainer

Update to 0.7.8

PR:             39302
Submitted by:   maintainer

Update to 0.77.

PR:             39067
Submitted by:   maintainer

Update to 0.7.6

PR:             38038
Submitted by:   maintainer

Upgrade to version 0.7.5.

PR:             37316
Submitted by:   MAINTAINER

Update to 0.7.4    

Update to 0.7.3    

- Update to 0.7.2   - Fix dependency problem with jpilot    

Update to 0.7.1    

chase libgpgme libversion.    

Add knob to enable LDAP support, no PORTREVISION bump required.    

- Fix depends   - Add new include/library paths    

Update to 0.7.0    

Update to version 0.6.6    

- Don't use automake/autoconf, because it requires to many patches     and
workarounds to get it worked with autoconf213, automake14 and so on.   - Bump
PORTREVISION    

Update to 0.6.5    

Fix build if WITH_GPGME is not defined.    

- Update to 0.6.4.   - depend on gpgme.4    

upgrade to 0.6.3    

Update to 0.6.2.    

Add OpenSSL (defaults to on) and GnuPG support (experimental, defaults   to
off).    

Upgrade to 0.6.1    

- update to 0.6.0   - change maintainer to lehmann@ans-netz.de   - simplify how
docs are installed   - reword pkg-{comment,descr}   - add noportdocs support to
pkg-plist    

upgrade to 0.4.66    

Number of commits found: 116 (showing only 100 on this page)

1 | 2  »  

14 vulnerabilities affecting 30 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities