Number of commits found: 54

update to 3.3.1

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10

With hat:       portmgr

Fix minor infelicity in OPTIONS, to prevent the end
of the world.

PR:             161896
Submitted by:   mandree, wblock (different patch)

add an option for the fftw3 OpenMP libraries, and turn it
off by default, because some compilers (e.g. clang) don't
support OpenMP; make linking to the fftw3*_threads shared
libraries easier by adding tags for the system thread
library; simplify math library changes for the long flavor
on 7.*; defer patch cleanup, to make debugging easier;
tweak format of post-patch target

- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:   ache, C. Burns, wen

use altivec only in the -float case; simplify some conditionals;
restrict sse2 to machines that support it; re-format a few lines

fix flags when built WITH_OPTIMIZED_CFLAGS

PR:             157936, 161023
Reported by:    L.V. Iliev, amdmi3, "break19", G.V. Seibert

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

Over to new volunteer.

Reset ahze@ due to maintainer-timeouts and no response to email.

Hat:            portmgr

- Oops checked in the wrong Makefile

Approved by:    ahze

- After digging into the Makefile and configure for fftw3 I discovered
  that USE_FORTRAN was only used to determine what name mangling scheme
  it had to use to compile the shim libs for fortran, but compiling everything
  using 'C' anyway.
  With this diff, the slave ports fftw3-long-fortran, fftw3-float-fortran
  and fftw3-fortran disapear since the shims are always built, without
  necessitating the use of a USE_FORTRAN.

Approved by:    ahze (Maintainer)

Update to 3.2.2

- Ensure Fortran shim is not built if USE_FORTRAN is not set.
- Split Fortran option into slave ports fftw3-fortran long-fortran float-fortran
- Have to bump PORTREVISION for package builds etc..
- Fix silly spelling mistakes "Percision" -> "Precision" noted.

Reviewed by:    itetcu (portmgr)
Approved by:    ahze (Maintainer)

Update to 3.2.1

- Update to 3.2

PR:             ports/129035
Submitted by:   Wen Heping <wenheping@gmail.com>
Approved by:    maintainer timeout (ahze; 6 months)

- fftw3 needs USE_FORTRAN in order to generate fortran shim. [1]
- Two week maintainer timeout.

PR:     ports/134115 [1]

- Update download locations

Update to 3.1.3

Add 'make regression-test' which runs a series of tests of the fftw3 build

PR:             ports/127103
Submitted by:   Pedro Giffuni <pfgshield-freebsd@yahoo.com>

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Remove always-false/true conditions based on OSVERSION 500000

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 3.1.2

- Update to 3.1.1
- Mark fftw3-long ONLY_FOR_ARCHS=i386 sparc64

PR:             93925 (did not use)

Remove USE_REINPLACE from ports starting with M

- Update MASTER_SITES to fix fetch

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Always build the seprate fftw3 threads lib.

Requested by:   Xride via irc.freenode.org/#FreeBSD-GNOME

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Move USE_LDOUBLE=yes above bsd.port.pre.mk so pointyhat actaully uses
  math/ldouble

- Fix fftw3-long by ALWAYS using math/ldouble even if CPUTYPE is defined
  since some CPUTYPES work and others don't.

- Fix build of fftw3-long on 5.x, 6.x, 7.x when CPUTYPE is not defined
  by using math/ldouble. Also, CPUTYPE=[i386|i486|i586|i686] and proabably
  some others won't work.

Reported by:    PointyHat

- Remove -malign-double from WITH_OPTIMIZED_CFLAGS on amd64 to fix build

PR:             ports/85555
Submitted by:   Tetsuya Uemura

- no longer depend on math/ldouble for math/fftw3-long on >= 504000 since
  it now has some long double math functions.

- Remove a few MASTER_SITES that don't carry fftw3

- Fix build for 4.x users who define WITH_OPTIMIZED_CFLAGS and have SSE by
  using internal libtool since we use gcc34 and libtool15 doesn't like a
  different CC/CXX other than the one it was built with [1]
- Fix plist if WITH_SMP_THREADS was defined
- Bump PORTREVISION to force update of plist changes

Reported by:    marcus [1]

- Remove i386 Restriction of 3dnow/sse since amd64 has sse and 3dnow
- Remove WITH_SSE Option and auto-detect it under WITH_OPTIMIZED_CFLAGS
- Move auto-detect of 3dnow under WITH_OPTIMIZED_CFLAGS

Remove WITH_OPTIMIZED_ATHLON knob and auto-detect 3dnow to enable Athlon/3dnow
optimizations

Pointed out by: kris

- Add note about WITH_OPTIMIZED_ATHLON will fall back to 3dNow if you don't have
  a Athlon
- Fix man pages so they say ${PREFIX}/etc instead of /etc
- Fix core dump of fftw-wisdom in >=5.x [1] by removing a dirty work around
  to use a 16-byte aligned maloc by really using freebsd's 16-byte
  aligned maloc

Reported by:    phk

Add support for slave ports

Approved by:    pav (co mentor)

Remove not need gnomeprefix

Pointed out by: marcus
Approved by:    adamw (mentor)

Change email to new FreeBSD.org address

Approved by:adamw (mentor)

Increase USE_GCC to 3.4 for those ports which compile with it.

Approved by:    portmgr

Needs perl to build

Reported by:    pointyhat

only show i386 options to i386

PR:             69488
Submitted by:   maintainer

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Unbreak build by using gmake all over the place. Without this, $< in Makefiles
  are not expanded and perl hangs on tty input during build

- Fix WITH_SSE on 4.x by using gcc-3.3
- Update MASTER_SITES

PR:             ports/68407
Submitted by:   michael johnson <ahze@rgv.net> (maintainer)

- Performance tweaks: enable SSE2 for libfftw, don't force 16-byte aligned
malloc

PR:             ports/67393
Submitted by:   michael johnson <ahze@ahze.net> (maintainer)

- Build and install fftwf library
- Add new knob to enable SSE optimizations

PR:             ports/67271
Submitted by:   michael johnson <ahze@ahze.net> (maintainer)

After repocopy from math/fftw, add fftw 3.0.1, a fast C library for computing
Discrete Fourier Transform. Version 3.x is API incompatible with fftw 2.x

PR:             ports/65559
Submitted by:   michael johnson <ahze@ahze.net>

Number of commits found: 54

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities