gnuplot+ 1.2.0_7 math =2

A command-driven interactive function plotting program
Maintained by: nakaji@jp.freebsd.org
Port Added: unknown
Also Listed In: japanese graphics
License: not specified in port

---

---

gnuplot-3.7.1+1.2.0 is a patch package to add some enhanced functions to
gnuplot(version 3.7) and enable it to treat Japanese text.

On patched gnuplot, the following are added.

1. LaTeX like text processing on PostScript terminal.
2. Japanese text handling
3. Saving histories of command-line-editing by GNU readline library.

For more information, see /usr/local/share/doc/gnuplot+/README.plus 

WWW: http://www.yama-ga.com/gnuplot/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: devel/gmake, x11/libX11, devel/autoconf213
Required To Run: x11/libX11
Required Libraries: graphics/png, japanese/vflib, print/freetype
There are no ports dependent upon this port

---

To install the port: cd /usr/ports/math/gnuplot+/ && make install clean
To add the package: pkg_add -r gnuplot371+

---

Configuration Options

     No options to configure

---

Master Sites:

http://heanet.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://sunet.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://iweb.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://switch.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://surfnet.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://kent.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://freefr.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://voxel.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://jaist.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://osdn.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://nchc.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://ncu.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://transact.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://softlayer.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://internode.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://ufpr.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

http://waix.dl.sourceforge.net/project/gnuplot/gnuplot/3.7.1/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

- Get Rid MD5 support

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Fix broken makefiles introduced with translation to new SF File Release System

Reported by:    dan
Pointyhat to:   myself

- Switch SourceForge ports to the new File Release System: categories starting
with M

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

SHA256ify

Approved by: krion@

Remove install-info from Makefile, it's automatically done when INFO is defined

Use INFO macro

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Fix patch-file.
Noticed by: SANETO Takanori <sanewo@ba2.so-net.ne.jp>

[math/gnuplot+] fix amd64 build failure

        It is marked BROKEN on amd64 because FreeBSD/amd64 does not
        have some IEEE FP functions like fpresetsticky(). The build
        failure log is now available at
       
http://pointyhat.freebsd.org/errorlogs/amd64-5-full/gnuplot371+-1.2.0_1.log

        I found file/patch-za causes the problem. The feature of
        this patch as reported in ports/16120 can take effect only
        on FreeBSD/i386.

PR:             ports/69143
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org>

- Drop pkg-message, author removed restriction from licence

PR:             ports/66798
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org> (maintainer)

Add size data, approved by maintainers.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

BROKEN on amd64: Does not compile

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.

fix for alpha build

PR:             51913
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org> (maintainer)

Fix version string typo.

PR:             ports/51912
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org> (maintainer)

De-pkg-comment.

Refetchable.

PR:             ports/48080
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org> (maintainer)

WWW moved

LIB_DEPENDS=ttf.4[...] --> USE_FREETYPE=yes

Fix plots with impulses and boxes    

Bump png major    

Install examples, too.    

apply patch in followup to the PR.    

update to 1.2.0.   change MAINTAINER's email address.    

Change PKGDIR from pkg/ to .  Also fix places where ${PKGDIR} is   spelled out
(many of which are ${PKGDIR}/MESSAGE -> ${PKGMESSAGE} type   fixes that
shouldn't have been necessary) and the string "/pkg/"   appear.    

Convert category math to new layout.  

Bump png shared library version.    

Update LIB_DEPENDS for gd: gd.0 -> gd.1.    

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities