maxima 5.27.0_1 math =8

Symbolic mathematics program
Maintained by: bf@FreeBSD.org
Port Added: 19 Jan 2003 13:22:42
Also Listed In: lisp tk
License: GPLv2

---

---

Maxima is a Common Lisp implementation of MIT's Macsyma system for
computer based algebra.

WWW: http://maxima.sourceforge.net/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: lang/sbcl, lang/python27, devel/gmake, lang/perl5.8
Required To Run: lang/sbcl, math/gnuplot, shells/bash
Required Libraries: x11-toolkits/tk85

Required by:
for Run

math/wxMaxima

---

To install the port: cd /usr/ports/math/maxima/ && make install clean
To add the package: pkg_add -r maxima

---

Configuration Options

===> The following configuration options are available for maxima-5.27.0_1:
     CLISP=off (default) "Build with Clisp"
     CMUCL=off (default) "Build with CMU Common Lisp"
     GCL=off (default) "Build with GNU Common Lisp"
     SBCL=on (default) "Build with Steel Bank Common Lisp"
===> Use 'make config' to modify these settings

---

Master Sites:

http://heanet.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://sunet.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://iweb.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://switch.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://surfnet.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://kent.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://freefr.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://voxel.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://jaist.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://osdn.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://nchc.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://ncu.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://transact.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://softlayer.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://internode.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://ufpr.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

http://waix.dl.sourceforge.net/project/maxima/Maxima-source/5.27.0-source/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

update lang/sbcl to 1.0.57, and adjust dependent ports

update math/maxima to 5.27.0, and adjust a dependent port

update lang/sbcl to 1.0.55, and adjust dependent ports

update to 5.26.0; replace some non-standard GNU extensions in sed(1)
calls in the Makefiles and scripts, which were corrupting some of the
html documents (reported by M. Talon)

update lang/sbcl to 1.0.54, and adjust dependent ports (this allows sbcl to
be build WITH_THREADS on recent versions of FreeBSD once again) [1]; rename
*.core files in sbcl and math/maxima so that they are not removed by
disk-cleaning scripts [2]; make it possible to use the makesum target in sbcl
WITH_SBCL; fix maxima build WITH_CMUCL, and place a default memory cap of
1GiB on amd64; reduce default output from a few targets in maxima, and defer
patch cleaning to the pre-build target to make debugging easier

PR:             162017 [1], 162680 [2]
Approved by:    pav (portmgr)
Feature safe:   yes

update lang/sbcl to 1.0.53, and adjust dependent ports

PR:             161444
Submitted by:   olgeni (earlier version)
Approved by:    miwi (portmgr)
Feature safe:   yes

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

update to 5.25.1

update to 5.25.0

Add a note about the new memory limit

- Update to 5.24.0
- Allow for a limit on memory use [1]

PR:             154899 [1]
Submitted by:   Denny Lin (different patch) [1]

Update to 5.23.2

Approved by:    makc, miwi (mentors, implicit)
Feature safe:   yes

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

- Bump Maxima revision after lang/sbcl update.

Round one migration of ports from automake{19,110} to automake111

Bump portrevision. A rebuild is needed after rebuilding lang/sbcl,
even if the sbcl version did not change in the end.

Submitted by:   Jan Henrik Sylvester <me janh de>

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Update to 5.22.1

Approved by:    miwi (co-mentor)

Add lisp to CATEGORIES

Approved by:    makc (co-mentor)

-Update to 5.22.0
-Fix a localization problem [1]
-Temporarily rename regression-test target to prevent tinderbox
errors WITH_SBCL
(See http://www.math.utexas.edu/pipermail/maxima/2010/022185.html )

PR:             147861 [1]
Submitted by:   Kuan-Chung Chiu <buganini@gmail.com> [1]
Approved by:    makc (co-mentor)

Change my ports to use my FreeBSD.org email address.

- Update to 5.21.1

PR:             ports/146168
Submitted by:   bf <bf1783@gmail.com> (maintainer)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Bump maxima portrevision as lang/sbcl has been updated.

Update to 5.20.1

PR:             ports/141455
Submitted by:   maintainer

- Bump PORTREVISION to reflect the lang/sbcl update.

- Update to 5.19.2

PR:             138494
Submitted by:   bf <bf1783@gmail.com> (maintainer)

- Remove remaining SFP references (switch these ports to SF)

Approved by:    portmgr (pav)

- Update to 5.19.1
- Switch to SFP

PR:             137863
Submitted by:   bf <bf1783@gmail.com> (maintainer)

Update to 5.19.0

PR:             ports/137613
Submitted by:   bf <bf1783 at gmail.com> (maintainer)

- Chase lang/sbcl update.

- Update maintainer mail adresse

Submitted by:   "b. f." <bf1783@gmail.com> (maintainer via private mail)

- Bump maxima portrevision due to lang/sbcl update.

- Update to 5.18.1

PR:             134012
Submitted by:   bf <bf2006a@yahoo.com> (maintainer)

- Bump revision because of lang/sbcl update.

- Change default Tcl/Tk version to 8.5
- Bump PORTVERSION of ports affected

Tested by:      pointyhat (pav)

- Bump maxima's PORTREVISION after lang/sbcl update.

- Update to 5.17.1

PR:             ports/131105
Submitted by:   bf <bf2006a@yahoo.com> (maintainer)

- Update to 5.17.0

PR:             129505
Submitted by:   bf <bf2006a@yahoo.com> (maintainer)

- Bump portrevision because of sbcl update.

- Bump up the maxima PORTREVISION because of lang/sbcl update.

- Bump revision because of lang/sbcl update.

- Bump up portrevision because of lang/sbcl update.

- Update to 5.16.3
- Pass maintainership to submitter

PR:             ports/126995
Submitted by:   bf <bf2006a at yahoo.com>

Reset sf@slappy.org due to maintainer-timeouts and no response to email.

Hat:    portmgr

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Bump PORTREVISION to force rebuild after the lang/sbcl update.

- Bump PORTREVISION to reflect the lang/sbcl update.

- Update to 5.15.0
- This port respects CC now, so no need to use MAKE_ENV nowadays

PR:             ports/123328
Submitted by:   bf <bf2006a at yahoo.com>
Approved by:    maintainer timeout (6 weeks)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Bump portrevision as SBCL version was updated.

Reported by:    Jan Henrik Sylvester <me@janh.de>

- Use USE_TK and add tk to category

PR:             ports/122220
Submitted by:   bf <bf2006a at yahoo.com>
Approved by:    maintainer timeout (3 weeks)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 5.14.0

PR:             ports/120531
Submitted by:   Yoshiaki Uchikawa <yoshiaki at north.bokutou.jp>
Approved by:    maintainer timeout (1 month)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Update to 5.13.0

PR:             115827
Submitted by:   bf <bf2006a@yahoo.com>
Approved by:    maintainer timeout

- Convert to OPTIONS framework

PR:             ports/114109
Submitted by:   Scott Flatman <sf at slappy.org> (maintainer)

- Fix build

PR:             ports/113976
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)

- Mark BROKEN on amd64

PR:             ports/113665
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)

- Update to 5.12.0

PR:             113084
Submitted by:   bf<bf2006a@yahoo.com>
Approved by:    maintainer

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to version 5.10.0.

PR:             ports/103960
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)

Fix SIZE() parameter

- Upgrade to 5.9.3;

- Switch from bash2 to bash.

PR:             94916
Submitted by:   Scott Flatman <sf (at) slappy.org> (maintainer)

- Don't pack up mtree symlinks

Approved by:    Scott Flatman <sf@slappy.org> (maintainer)

- Update to 5.9.2

PR:             ports/90941
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)

BROKEN: Does not build

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Unbreak.
- Update version.
- Add support for building with SBCL.
- General cleanup.

PR:             77083
Submitted by:   Scott Flatman <sf at slappy.org>

This port compiles correctly with GCL.

Approved by:    portmgr

BROKEN: Does not compile

Approved by:    portmgr (self)

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Bugfix. fix wish --> wish8.4 to fix xmaxima. Sort out INFO files a
bit better, and allow different lisp compilers to be used. The clisp
compiler dumps core, so mark that case as an error until it can get
fixed. Fix the COMMENT a bit to fit in with sysinstall better.

OK'ed by:       portmgr(marcus)

- Update to latest release.
- Patch files no longer needed.
- MAN page added.
- LIB_DEPENDS changes.
- RUN_DEPENDS changes.
- WWW changed.

PR:             51199
Submitted by:   maintainer
Approved by:    roberto(mentor)

Change MAINTAINER to new address.

PR:             ports/51141, ports/51142, ports/51143, ports/51144
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)

De-pkg-comment.

New Port: ports/math/maxima

        Maxima is a Common Lisp implementation of MIT's Macsyma
        system for computer based algebra.

PR:             ports/39888
Submitted by:   Scott Flatman <sf@dsinw.com>

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities