FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Please give me your LTO-4 or better tape library and I'll put it to good use.
Port details
p5-Array-LineReader Access lines of a file via an array
1.01_2 misc on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: perl@FreeBSD.org search for ports maintained by this maintainer
Port Added: 18 Nov 2010 00:17:58
Also Listed In: perl5
License: not specified in port
Array::LineReader gives you the possibility to access lines of some file by
the elements of an array. This modul inherites methods from Tie::Array (see
Tie::Array). You save a lot of memory, because the file's content is read
only on demand, i.e. in the case you access an element of the array. The
offset and length of all the lines is hold in memory as long as you tie your
array.

WWW: http://search.cpan.org/dist/Array-LineReader/
SVNWeb : Homepage : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. perl5.18.4 : lang/perl5.18
Runtime dependencies:
  1. perl5.18.4 : lang/perl5.18
There are no ports dependent upon this port

To install the port: cd /usr/ports/misc/p5-Array-LineReader/ && make install clean
To add the package: pkg install misc/p5-Array-LineReader


Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/Array/
  2. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Array/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Array/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/Array/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/Array/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/modules/by-module/Array/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/Array/
  8. http://backpan.perl.org/modules/by-module/Array/
  9. http://cpan.metacpan.org/modules/by-module/Array/
  10. http://distcache.FreeBSD.org/ports-distfiles/
  11. http://ftp.jaist.ac.jp/pub/CPAN/modules/by-module/Array/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/Array/
  13. http://www.cpan.dk/modules/by-module/Array/
  14. http://www.cpan.dk/modules/by-module/Array/
  15. http://www.cpan.org/modules/by-module/Array/

Number of commits found: 9

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
26 Nov 2014 13:08:38
Original commit files touched by this commit  1.01_2
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
23 Nov 2013 15:48:33
Original commit files touched by this commit  1.01_1
Revision:334679
sunpoet search for other commits by this committer
- Remove p5-IO: newer versions are included in all support Perl releases

PR:		ports/184192
Submitted by:	pluknet
04 Nov 2013 14:41:18
Original commit files touched by this commit  1.01
Revision:332733
vanilla search for other commits by this committer
Support STAGEDIR.
20 Sep 2013 20:50:59
Refresh Original commit files touched by this commit
Revision:327745  Sanity Test Failure
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)
29 Aug 2013 04:08:54
Original commit files touched by this commit  1.01
Revision:325559
sunpoet search for other commits by this committer
- Use single space after WWW:
18 Aug 2013 14:25:17
Original commit files touched by this commit  1.01
Revision:324918
az search for other commits by this committer
- Convert to new perl framework
17 Aug 2013 16:21:37
Original commit files touched by this commit  1.01
Revision:324849
bdrewery search for other commits by this committer
- Reset chinsan's ports

With hat:	portmgr
21 Jan 2012 17:40:15
Original commit files touched by this commit  1.01
eadler search for other commits by this committer
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr
18 Nov 2010 00:17:40
Original commit files touched by this commit  1.01
chinsan search for other commits by this committer
Add misc/p5-Array-LineReader, access lines of a file via an array.

Array::LineReader gives you the possibility to access lines of some file by
the elements of an array. This modul inherites methods from Tie::Array (see
Tie::Array). You save a lot of memory, because the file's content is read
only on demand, i.e. in the case you access an element of the array. The
offset and length of all the lines is hold in memory as long as you tie your
array.

WWW:    http://search.cpan.org/dist/Array-LineReader/

Number of commits found: 9

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
krb5May 28
krb5-112May 28
tsharkMay 28
tshark-liteMay 28
wiresharkMay 28
wireshark-liteMay 28
curlMay 26
curlMay 26
cassandraMay 24
cassandra2May 24
py-saltMay 24
davmailMay 23
dnsmasqMay 23
dnsmasq-develMay 23
dnsmasq-develMay 23

22 vulnerabilities affecting 39 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24826
Broken 226
Deprecated 71
Ignore 494
Forbidden 1
Restricted 204
No CDROM 95
Vulnerable 21
Expired 10
Set to expire 60
Interactive 0
new 24 hours 4
new 48 hours9
new 7 days43
new fortnight81
new month160

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.