Update gstreamer1 to upstream release 1.20.3

PR:		261585
Reviewed by:	riggs,jbeich,tcberner

Differential Revision:	https://reviews.freebsd.org/D36850

multimedia/x264: update to 0.164.3095

Changes:	https://code.videolan.org/videolan/x264/compare/5db6aa6...baee400f

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

multimedia/x264: update to 0.163.3060

Changes:	https://code.videolan.org/videolan/x264/compare/55d517b...5db6aa6

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

multimedia/x264: update to 0.161.3020

Changes:	https://code.videolan.org/videolan/x264/compare/cde9a93...d198931
ABI:		https://abi-laboratory.pro/tracker/timeline/x264/

multimedia/x264: update to 0.160.3011

Changes:	https://code.videolan.org/videolan/x264/compare/296494a4...cde9a93
ABI:		https://abi-laboratory.pro/tracker/timeline/x264/

Update gstreamer1 to 1.16.2.

- The spc plugin was removed inflavor for the gsm plugin.
- Added in tree qt plugin.

Changelog: https://gstreamer.freedesktop.org/releases/1.16/#1.16.2

Update net-im/fractal to 4.2.2 to support GStreamer 1.16 (approved by
maintainer)

Thanks to antoine@ for the exp-run.

PR:		239386

multimedia/x264: update to 0.157.2945

Changes:	https://git.videolan.org/?p=x264.git;a=shortlog;h=72db437770fd1ce3961f624dd57a8e75ff65ae0b
ABI:		https://abi-laboratory.pro/tracker/timeline/x264/

multimedia/x264: update to 0.155.2917

- HI10P is always built after
https://git.videolan.org/?p=x264.git;a=commitdiff;h=71ed44c73124

Changes:	https://git.videolan.org/?p=x264.git;a=shortlog;h=0a84d986e7020f8344f00752e3600b9769cc1e85
ABI:		https://abi-laboratory.pro/tracker/timeline/x264/

multimedia/{lib,}x264: update to 0.152.2854

Changes:	https://git.videolan.org/?p=x264.git;a=shortlog;h=e9a5903edf8ca59ef20e6f4894c196f135af735e

Update GStreamer1 ports to 1.12.2.

Rework the adding of dependancies in Mk/bsd.gstreamer.mk.
Previous when using USE_GSTREAMER[1] it would just add the request modules to
BUILD/RUN_DEPENDS. This caused the qa script to complain because the old code
didn't implicit depend on the gstreamer1 and gstreamer1-plugins[-bad] ports for
the libraries they carried, even if they where present via the plugins! The new
code adds implicit depends on these ports so USE_GSTREAMER[1] using ports have
all the libraries included.

* The mad mp3 plugin was removed, mpg123 plugin also provides mp3 decoding.
Switch over ports that used the gstreamer1 mad plugin.
* gtksink plugin renamed -> gtk
* Hook up the sndio plugin into the framework
* Add some indirect dependacies where needed
* Reorder the plugin list in bsd.gstreamer.mk so only one plugin per line. When
changing plugins it doesn't result in multiple lines being changed.
* Remove mentions in bsd.gstreamer.mk of plugins mentions that where removed.
* Depend on libunwind on i386/amd64, GStreamer links to it if it is present.

PR:		220753
Exp-run by:	antoine@

multimedia/x264: update to 0.148.2708

Changes:	https://git.videolan.org/?p=x264.git;a=shortlog;h=86b71982e131eaa70125f8d0e725fcade9c4c677
Differential Revision:	https://reviews.freebsd.org/D7958
Approved by:	koobs (maintainer)

Update GStreamer1 to 1.6.2.
Update GStreamer1-vaapi to 0.7.0.

* Spell GStreamer consistently. [1]
* Fix typo in py3kplist in py3-gstreamer1 [1]
* Improve plugins COMMENTS (more improvements welcome)
* Actually include the gstreamer1-libav update this time.

PR:		204204 [1] (based on)
Submitted by:	olivierd@ [1]

Update gstreamer1 ports to 1.6.0.

* gstreamer1-libav now uses ffmpeg from ports.
* New ports:
  * gstreamer1-validate: Tools to detect if elements are not behaving
    as expected, mainly aimed at developers, or advanced debugging.
  * gstreamer1-rtsp-server: Base foundation for building a rtsp
    server ontop of GStreamer
 * Bunch of new plugins like: mpg123, rsvg, libde265, openh264, x265 and dtls.

Release announcement:
 
http://lists.freedesktop.org/archives/gstreamer-announce/2015-September/000357.html

Obtained from:	gnome devel repo

multimedia/{lib}x264: Update to 0.144.2533 and major refactor

- Update to 0.144.2533 (from upstream stable branch) [1]
- Switch x264 and libx264 ports to master/slave ports respectively
- Bump PORTREVISION for dependent ports as the shared library version
  has changed.

multimedia/x264:

- Clean up and update "updating instructions" in Makefile header
- Tweak COMMENT
- Only LIB_DEPENDS on libx264 and add PLIST_FILES if this isn't the
  libx264 port.
- Allow COMMENT, USES, OPTIONS_*, CONFIGURE_ARGS to be overriden in
  libx264 port.

Big Gstreamer update:

Update gstreamer, gstreamer-plugins, -good, -bad and -ugly ports to 1.4.4.
Update gstreamer1-plugins-gnonlin to 1.4.0.
Update py-gstreamer1 and py3-gstreamer1 to 1.4.0.

Add multimedia/gstreamer1-editing-services. GES is a high-level library
for facilitating the creation of audio/video non-linear editors.

Add pulseaudio plugin now that pulseaudio is updated and add the gl plugin.

Drop :keepla from USES=libtool.
Drop @dirrm[try] from plists and drop gnomehier from USE_GNOME
Switch to optionhelpers in multimedia/gstreamer1.

PR:		194922 (merged with my own WIP)
Submitted by:	olivierd

multimedia/x264: General overhaul

- Split x264 into two ports: the CLI application (x264), and the library
  (libx264). This will allow x264 to use lavf and friends from ffmpeg for
  decoding and demuxing while preventing a circular dependency between the
  two: x264 can depend on ffmpeg, but ffmpeg will depend on libx264 rather
  than x264.
- Add the LAVF option to the CLI port, making the dependency on ffmpeg
  optional.
- Update to 0.142.2455.
- Amend fixes to local patches so that they can apply to the new upstream
  files.
- Provide the git revision and other version information to the build
  environment, allowing the CLI binary to display this information (like the
  Windows builds).
- Remove unsupported build options (X11_OUTPUT).
- Ensure that the library and CLI ports each have the appropriate options.
- Add notes for future contributors who wish to update the ports.
- Bump PORTREVISION for all dependent ports.

PR:           187805
Differential Revision:	https://reviews.freebsd.org/D1159
Submitted by: Andrew Berg <aberg010@my.hennepintech.edu>
Approved by:  koobs (maintainer, mentor)

Update gstreamer 1.0 ports to version 1.2.4.

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Update to 1.2.2.

Remove vaapi from plugin list in bsd.gstreamer.mk it accidently snuck in.

Changelog:
http://lists.freedesktop.org/archives/gstreamer-devel/2013-December/045238.html

Stagify Gstreamer ports.
Fix build of gstreamer and gstreamer1 with glib 2.38.x [1].
Update gstreamer and gstreamer-plugins to new rules, USES=gmake pathfix,
new LIB_DEPENDS syntax.
Only pull in flex if base version is too old.
Be more selective for which OSVERSIONS we need gcc due to the clang bug.

Obtained from:	Gstreamer upstream [1]

multimedia/x264: Update to 20130827 snapshot

- Update to 20130827 snapshot
- Add CONFIGURE_ARGS to disable OpenCL, fixes configure failure
- Chase library version bump in dependent ports

PR:		ports/182484
Submitted by:	mm
Reviewed by:	kwm, bapt

Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)

Add Gstreamer 1.0.7. This is the new stable version of the
Gstreamer multimedia framework.

Use the USE_GSTREAMER1 macro to select Gstreamer 1.0 plugins. A new chapter
for the porters handbook about gstreamer is a work in progress.

X related plugins are now stand alone. The gio plugin is now part of the
gstreamer1-plugins port and the oss plugins are now part of the
gstreamer1-plugins-good port.

Note that the pulseaudio plugin is missing because it needs a newer version
of pulseaudio. Also there are still a number of plugins from -bad which
haven't been ported to the 1.0 API yet.