FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
libnetdude 0.12 net on this many watch lists=1 search for ports that depend on this port
A library for manipulating libpcap/tcpdump trace files

There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org search for ports maintained by this maintainer
Port Added: 04 May 2004 07:36:56
License: not specified in port


The core of the Netdude framework and the place where the packet manipulations
are performed. It allows you to implement trace file manipulations at a much
higher level of abstraction than code written directly on top of the pcap
library.

WWW: http://netdude.sourceforge.net/
SVNWeb : Main Web Site : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.

Required To Build:
  1. devel/libtool
Required Libraries:
  1. net/libpcapnav
  2. devel/glib12

This port is required by:

for Libraries * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

To install the port: cd /usr/ports/net/libnetdude/ && make install clean
To add the package: pkg install net/libnetdude


Configuration Options
     No options to configure

Master Sites:
  1. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
  2. http://downloads.sourceforge.net/project/netdude/libnetdude/0.12/

Number of commits found: 28

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
09 Mar 2014 14:39:07
Original commit files touched by this commit  0.12
Revision:347611
miwi search for other commits by this committer
- Stage support
21 Jan 2014 23:40:23
Original commit files touched by this commit  0.12
Revision:340674
bapt search for other commits by this committer
Fix properties on pkg-plist
20 Sep 2013 22:10:25
Original commit files touched by this commit  0.12
Revision:327755
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
07 Feb 2012 14:45:17
Original commit files touched by this commit  0.12
wxs search for other commits by this committer
Assign back to the pool.

Approved by:    maintainer via private mail
27 May 2011 11:53:41
Original commit files touched by this commit  0.12
decke search for other commits by this committer
- Update to 0.12
- Remove PORTDOCS entries because docs are always disabled

PR:             ports/154719
Submitted by:   Armin Pirkovitsch <armin@frozen-zone.org>
Approved by:    maintainer timeout (3.5 months)
20 Mar 2011 12:54:45
Original commit files touched by this commit  0.10a
miwi search for other commits by this committer
- Get Rid MD5 support
04 Dec 2010 07:34:27
Original commit files touched by this commit  0.10a
ade search for other commits by this committer
Sync to new bsd.autotools.mk
22 Aug 2009 00:32:25
Original commit files touched by this commit  0.10a
  Sanity Test Failure
amdmi3 search for other commits by this committer
- Switch SourceForge ports to the new File Release System: categories starting
with N
02 Aug 2009 19:36:34
Original commit files touched by this commit  0.10a
mezz search for other commits by this committer
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
21 Aug 2008 06:18:49
Original commit files touched by this commit  0.10a
rafan search for other commits by this committer
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above View all of this commit message)
06 Feb 2008 14:27:01
Original commit files touched by this commit  0.10a
wxs search for other commits by this committer
Fix the duplicate section.

Pointyhat to me.

Submitted by:   pointyhat via Erwin
Approved by:    garga (mentor)
04 Feb 2008 21:42:51
Original commit files touched by this commit  0.10a
wxs search for other commits by this committer
Update netdude to 0.4.8a.
Update libnetdude to 0.10a.
Update libpcapnav to 0.8.

Pass maintainership to submitter.

PR:             ports/120116
Submitted by:   Brenton Chang <brenton.chang@gmail.com>
Approved by:    maintainer (implicit), garga (mentor)
04 Oct 2007 02:10:52
Original commit files touched by this commit  0.9
edwin search for other commits by this committer
Remove always-false/true conditions based on OSVERSION 500000
07 Jan 2007 21:42:09
Original commit files touched by this commit  0.9
itetcu search for other commits by this committer
Update to 0.9

PR:             ports/107646
Submitted by:   Wesley Shields (maintainer)
19 Aug 2006 16:49:49
Original commit files touched by this commit  0.8
miwi search for other commits by this committer
- Update maintainer addresses

PR:             ports/102230
Submitted by:   Wesley Shields <wxs(at)atarininja.org>
Approved by:    krion (mentor)
29 Apr 2006 09:45:42
Original commit files touched by this commit  0.8
pav search for other commits by this committer
- Update to 0.8
- Transfer maintainership

PR:             ports/96425
Submitted by:   Wesley Shields <wxs@csh.rit.edu>
Approved by:    Yann Berthier <yb@bashibuzuk.net> (maintainer)
07 Mar 2006 08:28:06
Original commit files touched by this commit  0.6_1
ade search for other commits by this committer
Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)
23 Feb 2006 10:40:45
Original commit files touched by this commit  0.6
ade search for other commits by this committer
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
22 Jan 2006 21:24:05
Original commit files touched by this commit  0.6
edwin search for other commits by this committer
SHA256ify

Approved by: krion@
15 Nov 2005 06:52:12
Original commit files touched by this commit  0.6
ade search for other commits by this committer
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
12 Apr 2005 03:26:57
Original commit files touched by this commit  0.6
obrien search for other commits by this committer
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
11 Apr 2005 08:04:41
Original commit files touched by this commit  0.6
obrien search for other commits by this committer
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
21 Mar 2005 15:07:52
Original commit files touched by this commit  0.6
vs search for other commits by this committer
Update maintainer's address

Submitted by: maintainer
22 Aug 2004 14:19:28
Original commit files touched by this commit  0.6
krion search for other commits by this committer
Fix build with gcc-3.4
09 Jul 2004 17:43:11
Original commit files touched by this commit  0.6
marcus search for other commits by this committer
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet
09 May 2004 20:45:20
Original commit files touched by this commit  0.6
pav search for other commits by this committer
- Correct cutnpasto in Makefile header

PR:             ports/66429
Submitted by:   Wesley Shields <wxs@csh.rit.edu>
09 May 2004 17:15:08
Original commit files touched by this commit  0.6
pav search for other commits by this committer
- Fix build on 4.x

Reported by:    kris
PR:             ports/66374
Submitted by:   Yann Berthier <yb@sainte-barbe.org> (maintainer)
04 May 2004 07:35:47
Original commit files touched by this commit  0.6
krion search for other commits by this committer
Add libnetdude 0.6,

The core of the Netdude framework and the place where the
packet manipulations are performed. It allows you to implement
trace file manipulations at a much higher level of abstraction
than code written directly on top of the pcap library.

PR:             ports/66178
Submitted by:   Yann Berthier <yb@sainte-barbe.org>

Number of commits found: 28

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
py-django*Apr 24
py-django-devel*Apr 24
py-django14*Apr 24
py-django15*Apr 24
mingw32-opensslApr 23
opensslApr 23
bugzilla40*Apr 18
bugzilla40*Apr 18
bugzilla42*Apr 18
bugzilla42*Apr 18
bugzilla44*Apr 18
bugzilla44*Apr 18
curlApr 11
dbus-glibApr 11
libaudiofileApr 11

13 vulnerabilities affecting 19 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24360
Broken 168
Deprecated 77
Ignore 519
Forbidden 6
Restricted 263
No CDROM 108
Vulnerable 29
Expired 10
Set to expire 64
Interactive 22
new 24 hours 3
new 48 hours6
new 7 days17
new fortnight32
new month123

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.