Number of commits found: 90

- Adds knob for py-mako so OP can include py-mako dependency

PR:             ports/164248
Submitted by:   scheidell@

- Fix RUN_DEPENDS (:=), mostly for portlint
- Change WITH_PCAP_PORT to LIB_DEPENDS, not BUILD_DEPENDS
- add stopdaemon to pkg-plist
- need chown in pkg-plist so that .tbz (package building) works
- clean up install message (patch-Makefile.am)
- add test in pkg-deinstall.in to test for DBDIR

PR:             ports/163682
Submitted by:   scheidell@

PR:             16041
Submitted by:   scheidell
Approved by:    maintainer (sylvio, implicit), gabor (mentor)
Feature safe:   Yes

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Track dependencies after databases/gdbm update

- Update to 4.1.0

- Fix to RUN_DEPENDS, added dependencies rrdtool and GeoIP

PR:             ports/154800
Submitted by:   M <scheidell@secnap.net>

- Update to 4.0.1

Submitted by:   Jean-Baptiste Berlioz <tobe@gnagnaki.net> (via E-mail)

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Update libevent to 1.4.14b

PR:             ports/147723
Approved by:    maintainer (timeout)

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Mark BROKEN on 6.X: does not configure

Reported by:    pointyhat

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Removed line BROKEN, the port now fetch files in Makefile and no more during
build stage.

Approved by:    itetcu (mentor)
Feature safe:   yes

- update to jpeg-8

- Removed dependencies of wget
- Add extra files of Makefile.am into Makefile
- Change distinfo
- BUMP PORTREVISION

Approved by:    miwi (mentor)

Mark BROKEN: fetches files during build stage.

- Fix to install file etter.finger.os
- Fix to problem with kevent

PR:             ports/139361
Submitted by:   Vladimir Korkodinov <viper@perm.raid.ru>
Approved by:    itetcu (mentor)

- Update my mail address to FreeBSD

Approved by:    miwi (mentor)

- Update to 3.3.10
- Pass maintainership to submitter

PR:             138919
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>
Feature safe:   yes

- Reassign maintainer to ports@

- Switch SourceForge ports to the new File Release System: categories starting
with N

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Turn off a debug knob which was left on.

PR:             ports/135418
Submitted by:   Anthony Maszeroski <maszeroskia3@scranton.edu>

- Remove ASDATA knob as it is no longer applicable.
  My initial testing was flawed so I missed this.

PR:             ports/135377
Submitted by:   Keith Gaughan <kmgaughan@eircom.net>

- Update to 3.3.9.
- Remove dependencies that are no longer needed.
- Add dependency on net/GeoIP and hack around the desire for the port to fetch
  and build it's own copy.
- Cleanup pkg-descr.

- Mark my ports as MAKE_JOBS_SAFE (with the exception of nethack34-gnome which
  is MAKE_JOBS_UNSAFE).

Update to 3.3.8

PR:             ports/128153
Submitted by:   Michael Scheidell <scheidell@secnap.net>

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Require rrdtool-1.2 or higher.  rrdtool10 results in a build error.

Submitted by:   Craig Green (private mail)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Explicitly disable SNMP which breaks the build when net-mgmt/net-snmp is
installed on 7.0.

PR:             ports/120793
Submitted by:   Helmut Schneider <jumper99@gmx.de>
Approved by:    garga (mentor)

Update my address.

Approved by:    garga (mentor)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

[MAINTAINER]: Fix net/ntop

        net/ntop doesn't build under certain circumstances (it is
        confusing versions of autoconf). Attached is a patch submitted
        to me by Edward Sutton and tested by Jeffrey Goldberg which
        fixes this problem. I haven't been able to reproduce this
        problem but Jeffrey pointed out that this patch fixed it
        for him. I don't believe that a bump of PORTREVISION is
        necessary for this, but feel free to correct me if I am
        wrong. :)

        A discussion of this can be found at

       
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=333895+0+current/freebsd-ports

PR:             ports/116289
Submitted by:   Wesley Shields <wxs@atarininja.org>

- Update to 3.3

PR:             ports/114681
Submitted by:   Wesley Shields <wxs@atarininja.org> (maintainer)

- Fix build with qt4.
- Bump PORTREVISION

PR:             112689
Submitted by:   Wesley Shields <wxs@atarininja.org> (maintainer)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use libtool15 port instead of included version to avoid objformat a.out botch

This port depends on urwfonts, not urwfonfs.

Reported by:    Portsnap buildbox

- Fix run-time dependencies

PR:             ports/102291
Submitted by:   Wesley Shields (maintainer)

- updated maintainer's email address

PR:             ports/102705
Submitted by:   maintainer (Wesley Shields)

- Add libxml2 dependency [1]
- Bump PORTREVISION [1]
- Remove IS_INTERACTIVE and admin password creation from installation and put
admin password check in rc.d script
- Add OPTIONS to install AS data [2]
- portlint(1)

PR:             94672 [1], 94809 [2]
Submitted by:   maintainer
Notified by:    Andy Wettstein [1]

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Install rc.d script with USE_RC_SUBR (PORTREVISION bumped).
- Prompt for ntop admin password and set IS_INTERACTIVE only if necessary.
- Quote BROKEN message.
- Adds pkg-deinstall with cleanup instructions.
- Submitter takes maintainership.

PR:             ports/90264
Submitted by:   Wesley Shields <wxs@csh.rit.edu>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Revert to old method to be installed without execution permission
to prevent hang on reboot, since ntop asks for password on 1st
execution. The real fix is to convert script to rc-ng.

Submitted by:   Clement Laforet <clement@FreeBSD.org>

ntop start/stop script installed without execute persmissions

- Update to 3.2
- Re-add version checking allow ntop developers to know how many FreeBSD
  people use it
- Drop maintainership

- Fix build if rrdtool 1.2 is intalled
- mark port BROKEN if WITH_XMLDUMP defined (does not build)

Submitted by:   mich
Reported by:    Bryan Fullerton <fehwalker@gmail.com> (PR: ports/84019),
                piotrekk@excite.com

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Bump PORTREVISION (I forget to commit this file)

- Update to 3.1

Notes:
    - IPv6 support is disabled
    - now startup script prompts for admin password, if unset.

Fix a potential segmentation faul when loading certain pages in the web
interface as well as in shutting down ntop.

Approved by:    maintainer

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Update to 3.0
- Add ipv6 to CATEGORIES

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

- Update to 3.0-pre2

Submitted by: ale

- Use OPTIONS
- SIZEify distinfo

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

- fix typo in pkg-message [1]
- Change my email address

Noticed by:         Bob Rakov <bob@rakov.net> [1]
Approved by:        erwin (mentor)

- Fix Makefile syntax if WITH_RRD is defined

PR:             ports/60256
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org> (maintainer)

- Fix graphs by: use bundled gdchart and use gd1 instead of gd2
- Get rid of interactive menu
- Rework build options
- Fix optional XML dumping support

PR:             ports/60184
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org> (maintainer)

- Give maintainership to volunteer

PR:             ports/60160
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org>

get rid of libgnugetopt dependency for -CURRENT,
use USE_GETOPT_LONG instead.

Add a missed dependency to gdbm

Reported by:    kris

update ntop to 2.2

PR:             51077
Submitted by:   Ying-Chieh Liao <ijliao@terry.dorm11.nctu.edu.tw>

Move inclusion of bsd.port.pre.mk later in the file for conditional BROKEN
tag.  Early inclusion caused problems for some ports, so to be safe I'm
updating all of them.

Pointy hat to:  kris

BROKEN on 5.1: does not compile

De-pkg-comment.

- Relinquish maintainership.  I don't use ntop anymore, and I've been
  consistently unable to find the time to update the port.

chase gdbm lib version

Chase the gdchart update and bump PORTREVISION.

- Fix an error I introduced into rc.d startup script during previous commit.
- Bump PORTREVISION

- Update to version 2.0.99.r2 which is only a release candidate, but there
  has been a "massive public demand" that this port be unFORBIDDEN.
- Remove FORBIDDEN.
- Add a PKGMESSAGE to explain new post-install procedure, and to warn the
  user that this port/package is likely to have future security issues.
- Install startup script mode 444, forcing the user to change this explicitly
  to run ntop at system startup.  Document this in PKGMESSAGE.

Chase openssl shlib version increase.

Pointy hat to:  dinoex

- Mark FORBIDDEN.  Remote exploit has been published on Bugtraq, and there    
has been no official response from the author as yet.    

- Enable suport for libwrap.   - Bump PORTREVISION.   - Update
pkg-{comment,descr} while I'm at it.    

- Add a patch which should allow this port to build on a machine with a    
modified LOCALBASE.   - This port should now also build on OSVERSIONs before
OpenSSL was imported     (untested).   - Bumped PORTREVISION.    

- Update/rewrite to version 2.0   - Major update of ntop - much of it rewritten 
 - Take over maintainership for a while    

when i changed USE_AUTOCONF to HAS_CONFIGURE 2.5 years ago i should have made  
it GNU_CONFIGURE...    

Eliminate WRKSRC=${WRKDIR}/${PKGNAME} lines, as these will break when  
PORTREVISION or PORTEPOCH are defined.    

Re-enable this port after removing setuid privileges and limiting access   to
root only.    

Mark FORBIDDEN due to frightening lack of safe string operations leading   to
multiple local and remote root exploits.    

Number of commits found: 90

15 vulnerabilities affecting 34 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities