FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

non port: head/net/rabbitmq/Makefile
SVNWeb

Number of commits found: 79

Fri, 5 Aug 2016
[ 18:28 olgeni ] Original commit   Revision:419699
419699 net/rabbitmq/Makefile
419699 net/rabbitmq/distinfo
Update net/rabbitmq to version 3.6.5.
Thu, 4 Aug 2016
[ 04:36 marino ] Original commit   Revision:419592
419592 multimedia/kodi/Makefile
419592 multimedia/plexhometheater/Makefile
419592 net/rabbitmq/Makefile
419592 print/apsfilter/Makefile
419592 sysutils/pcbsd-utils/Makefile
419592 textproc/s5/Makefile
multimedia ... sysutils: Remove redundant dependency on unzip

A dependency on unzip will never be registered since unzip is available
on all supported platforms (since FreeBSD 8.0).
Note that it's pulled in by a non-default option.

Approved by:	infrastructure blanket (removal of redundant deps)
Sat, 30 Jul 2016
[ 11:23 olgeni ] Original commit   Revision:419311
419311 net/rabbitmq/Makefile
419311 net/rabbitmq/distinfo
Update net/rabbitmq to version 3.6.4.
Thu, 7 Jul 2016
[ 10:50 olgeni ] Original commit   Revision:418168
418168 net/rabbitmq/Makefile
418168 net/rabbitmq/distinfo
418168 net/rabbitmq/pkg-plist
Update net/rabbitmq version 3.6.3.
Fri, 20 May 2016
[ 09:35 olgeni ] Original commit   Revision:415551
415551 net/rabbitmq/Makefile
415551 net/rabbitmq/distinfo
415551 net/rabbitmq/pkg-plist
Update net/rabbitmq to version 3.6.2.
Sat, 23 Apr 2016
[ 15:12 olgeni ] Original commit   Revision:413880
413880 net/rabbitmq/Makefile
413880 net/rabbitmq/files/rabbitmq.in
Make sure that the Erlang cookie file has mode 600 before
starting, else RabbitMQ will not run.

MFH:		2016Q2
Fri, 1 Apr 2016
[ 14:16 mat ] Original commit   Revision:412348
412348 mail/addresses-goodies/Makefile
412348 mail/alpine/Makefile
412348 mail/anubis/Makefile
412348 mail/archiveopteryx-devel/Makefile
412348 mail/archiveopteryx/Makefile
412348 mail/assp/Makefile
412348 mail/automx/Makefile
412348 mail/avenger/Makefile
412348 mail/balsa/Makefile
412348 mail/batv-milter/Makefile

(Only the first 10 of 2612 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight
Wed, 2 Mar 2016
[ 21:31 olgeni ] Original commit   Revision:409962
409962 net/rabbitmq/Makefile
409962 net/rabbitmq/distinfo
409962 net/rabbitmq/files/patch-src_rabbit__misc.erl
409962 net/rabbitmq/pkg-plist
Update net/rabbitmq to version 3.6.1.

From the release notes:

    This release fixes a number of bugs in 3.6.0 and earlier versions,
    as well as one security issue (CVE-2015-8786) in the management
    plugin. It also contains usability improvements.

CVE 2015-8786 has not been publicly announced yet.

Security:	CVE-2015-8786
Tue, 16 Feb 2016
[ 22:20 olgeni ] Original commit   Revision:409020
409020 net/rabbitmq/Makefile
409020 net/rabbitmq/files/patch-src_rabbit__misc.erl
Remove custom stderr formatting from net/rabbitmq.

From upstream commit fecd0e5 in rabbitmq/rabbitmq-common:

    Opening several ports for single fd is considered undefined behaviour
    in erlang. It's safe to replace this whole function with 'io:format'.

    Because writing to standard_error with io:format is synchronous - after
    this call has returned data was definitely sent to the port. And
    `erlang:halt` guarantees that this data will be flushed afterwards.

See also ba531a1 in erlang/otp:

    Instead of outputting a formatted message showing errors found, a core
    was (often) created.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 12 Feb 2016
[ 10:48 olgeni ] Original commit   Revision:408713
408713 net/rabbitmq/Makefile
408713 net/rabbitmq/files/rabbitmq.in
Make sure that /var/log/rabbitmq has the correct owner.
Wed, 30 Dec 2015
[ 22:44 olgeni ] Original commit   Revision:404880
404880 net/rabbitmq/Makefile
404880 net/rabbitmq/files/rabbitmq.in
Avoid calling "rabbitmqctl status" in a loop to make sure that RabbitMQ is
started.

"rabbitmqctl wait" alone should suffice, and the loop seems to cause some
kind of race condition that causes a segfault in the Erlang VM.

RabbitMQ would start anyway, but users would get a segmentation fault
message on the console.

We also wait on daemon(8)'s pid to make sure that restarts are synchronized
(i.e. daemon(8) is stopped before starting it again with the same pidfile).

PR:		204147
Submitted by:	elofu17@hotmail.com
Fri, 18 Dec 2015
[ 14:35 olgeni ] Original commit   Revision:403966
403966 net/rabbitmq/Makefile
403966 net/rabbitmq/distinfo
403966 net/rabbitmq/pkg-plist
Upgrade net/rabbitmq to version 3.5.7.
Wed, 7 Oct 2015
[ 16:22 olgeni ] Original commit   Revision:398769
398769 net/rabbitmq/Makefile
398769 net/rabbitmq/distinfo
Upgrade net/rabbitmq to version 3.5.6; set NO_ARCH.
Fri, 25 Sep 2015
[ 08:33 olgeni ] Original commit   Revision:397801
397801 net/rabbitmq/Makefile
397801 net/rabbitmq/distinfo
397801 net/rabbitmq/files/patch-rabbitmqctl
397801 net/rabbitmq/files/patch-scripts_rabbitmq-plugins
397801 net/rabbitmq/files/patch-scripts_rabbitmq-server
397801 net/rabbitmq/files/patch-scripts_rabbitmqctl
397801 net/rabbitmq/pkg-plist
Upgrade net/rabbitmq to version 3.5.5.
Wed, 29 Jul 2015
[ 22:09 antoine ] Original commit   Revision:393196
393196 Mk/Uses/shebangfix.mk
393196 accessibility/caribou/Makefile
393196 astro/py-metar/Makefile
393196 astro/weather/Makefile
393196 audio/boodler/Makefile
393196 audio/lollypop/Makefile
393196 audio/mma/Makefile
393196 audio/py-tagpy/Makefile
393196 chinese/sunpinyin/Makefile
393196 databases/nagios-check_mongodb/Makefile

(Only the first 10 of 62 ports in this commit are shown above. View all ports for this commit)
Switch default python_CMD used by shebangfix to ${PYTHON_CMD} for ports
using python

PR:		201077
Reviewed by:	mat
With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D2955
Mon, 27 Jul 2015
[ 13:04 olgeni ] Original commit   Revision:392977
392977 net/rabbitmq/Makefile
392977 net/rabbitmq/distinfo
392977 net/rabbitmq/files/rabbitmq.in
Upgrade to version 3.5.4.

- Make sure that all content of /var/db/rabbitmq is owned by rabbitmq
  at startup.

- Only set HOME when actually starting the rabbitmq process.
Sat, 23 May 2015
[ 20:51 olgeni ] Original commit   Revision:387184
387184 net/rabbitmq/Makefile
387184 net/rabbitmq/distinfo
387184 net/rabbitmq/files/patch-rabbitmqctl
387184 net/rabbitmq/files/patch-scripts_rabbitmq-plugins
387184 net/rabbitmq/files/patch-scripts_rabbitmq-server
Upgrade to version 3.5.3 and fix portlint warnings.
Tue, 12 May 2015
[ 18:25 olgeni ] Original commit   Revision:386167
386167 net/rabbitmq/Makefile
386167 net/rabbitmq/distinfo
Upgrade to version 3.5.2.
Sun, 3 May 2015
[ 16:38 olgeni ] Original commit   Revision:385288
385288 net/rabbitmq/Makefile
385288 net/rabbitmq/distinfo
Upgrade to version 3.5.1.

PR:		199885
Submitted by:	David Harrigan
Wed, 11 Mar 2015
[ 20:21 olgeni ] Original commit   Revision:381035
381035 net/rabbitmq/Makefile
381035 net/rabbitmq/distinfo
381035 net/rabbitmq/files/patch-scripts_rabbitmq-plugins
381035 net/rabbitmq/pkg-plist
Upgrade to version 3.5.0.
Thu, 12 Feb 2015
[ 10:43 olgeni ] Original commit   Revision:378867
378867 net/rabbitmq/Makefile
378867 net/rabbitmq/distinfo
Upgrade to version 3.4.4 and set CPE_VENDOR.

PR:		197449 (CPE)
Submitted by:	shun
Sat, 31 Jan 2015
[ 16:19 olgeni ] Original commit   Revision:378219
378219 net/rabbitmq/Makefile
378219 net/rabbitmq/files/rabbitmq.in
Startup script fixes:

- Avoid race condition in startup. Use daemon(8) rather than "rabbitmqctl
  status" to safely retrieve the pid.

- Make sure that the Erlang cookie permissions are correct before starting
  the RabbitMQ node (using rabbitmqctl as root could create a read-only
  cookie).

- Make sure that the RabbitMQ application is actually running when
  rabbitmq_start is done. Remove the now useless "wait" command from
  extra_commands.
Wed, 7 Jan 2015
[ 16:16 olgeni ] Original commit   Revision:376469
376469 net/rabbitmq/Makefile
376469 net/rabbitmq/distinfo
Upgrade to version 3.4.3.
Wed, 26 Nov 2014
[ 21:11 olgeni ] Original commit   Revision:373460
373460 net/rabbitmq/Makefile
373460 net/rabbitmq/distinfo
Upgrade to version 3.4.2.
Mon, 10 Nov 2014
[ 15:44 olgeni ] Original commit   Revision:372400
372400 net/rabbitmq/Makefile
372400 net/rabbitmq/distinfo
Upgrade to version 3.4.1.
Wed, 5 Nov 2014
[ 11:38 marino ] Original commit   Revision:372183
372183 net/rabbitmq/Makefile
net/rabbitmq: Rare issue, but this is not jobs safe
Wed, 22 Oct 2014
[ 10:51 olgeni ] Original commit   Revision:371353
371353 net/rabbitmq/Makefile
371353 net/rabbitmq/distinfo
371353 net/rabbitmq/files/patch-rabbitmqctl
371353 net/rabbitmq/files/patch-scripts_rabbitmq-plugins
371353 net/rabbitmq/files/patch-scripts_rabbitmq-server
371353 net/rabbitmq/pkg-plist
Upgrade to version 3.4.0.
Tue, 12 Aug 2014
[ 08:28 olgeni ] Original commit   Revision:364686
364686 net/rabbitmq/Makefile
364686 net/rabbitmq/distinfo
364686 net/rabbitmq/pkg-plist
Upgrade to version 3.3.5.
Tue, 22 Jul 2014
[ 10:27 olgeni ] Original commit   Revision:362529
362529 net/rabbitmq/Makefile
362529 net/rabbitmq/pkg-plist
Install sample rabbitmq.config.

Fix etc paths in rabbitmq-env.conf(5).
Tue, 24 Jun 2014
[ 13:47 olgeni ] Original commit   Revision:359085
359085 net/rabbitmq/Makefile
359085 net/rabbitmq/distinfo
Upgrade to version 3.3.4.
Tue, 17 Jun 2014
[ 11:46 olgeni ] Original commit   Revision:358093
358093 net/rabbitmq/Makefile
358093 net/rabbitmq/distinfo
Upgrade to version 3.3.3.
Mon, 9 Jun 2014
[ 10:57 olgeni ] Original commit   Revision:357135
357135 net/rabbitmq/Makefile
357135 net/rabbitmq/distinfo
357135 net/rabbitmq/pkg-plist
Upgrade to version 3.3.2.
Tue, 29 Apr 2014
[ 15:02 olgeni ] Original commit   Revision:352628
352628 net/rabbitmq/Makefile
352628 net/rabbitmq/distinfo
352628 net/rabbitmq/pkg-plist
Upgrade to version 3.3.1.
Thu, 3 Apr 2014
[ 10:41 olgeni ] Original commit   Revision:349989
349989 UPDATING
349989 net/rabbitmq/Makefile
349989 net/rabbitmq/distinfo
349989 net/rabbitmq/pkg-plist
Upgrade net/rabbitmq to 3.3.0.

- Add optional installation of rabbitmqadmin script.
- Note the new guest user behavior in UPDATING.
Tue, 4 Mar 2014
[ 14:47 olgeni ] Original commit   Revision:347021
347021 net/rabbitmq/Makefile
347021 net/rabbitmq/distinfo
Upgrade to version 3.2.4.
Wed, 12 Feb 2014
[ 14:03 mat ] Original commit   Revision:343923
343923 biology/seqtools/Makefile
343923 biology/seqtools/pkg-plist
343923 databases/dbtool/Makefile
343923 databases/dbtool/pkg-plist
343923 games/gnubg/Makefile
343923 games/gnubg/pkg-plist
343923 games/pengpong/Makefile
343923 games/pengpong/pkg-plist
343923 games/seabattle/Makefile
343923 games/seabattle/pkg-plist

(Only the first 10 of 20 ports in this commit are shown above. View all ports for this commit)
Fix old makeplist bug.

Pointy hat to:	people who blindly use makeplist
Sponsored by:	Absolight
Thu, 6 Feb 2014
[ 15:00 olgeni ] Original commit   Revision:343104
343104 net/rabbitmq/Makefile
343104 net/rabbitmq/files/rabbitmq.in
Add a separate "wait" command to the startup script, to be used
with automated deployment systems to ensure that RabbitMQ is actually
available.

The pid file may exist, but it can still be empty when $rabbitmq_ctl
is executed. In this case the script would not wait for anything
and produce some weird output on the console.

PR:		ports/185962 (follow up)
Fri, 24 Jan 2014
[ 10:36 olgeni ] Original commit   Revision:340888
340888 net/rabbitmq/Makefile
340888 net/rabbitmq/distinfo
Upgrade to version 3.2.3 and add LICENSE.
Tue, 21 Jan 2014
[ 15:40 olgeni ] Original commit   Revision:340614
340614 net/rabbitmq/Makefile
340614 net/rabbitmq/files/rabbitmq.in
- Export HOME before starting RabbitMQ node.
- After starting, wait for RabbitMQ to be available.

PR:		ports/185962
Submitted by:	Anes Mukhametov <anes@anes.su>
Fri, 10 Jan 2014
[ 09:29 olgeni ] Original commit   Revision:339337
339337 net/rabbitmq/Makefile
339337 net/rabbitmq/files/rabbitmq.in
Reset ERL_LIBS before running RabbitMQ.

ERL_LIBS was inherited from the current environment, and it may
contain paths to older versions of amqp_client, which may not be
compatible with the current RabbitMQ management plugin.

As a result, RabbitMQ would not start when the management plugin was
enabled, with this error:

{could_not_start,amqp_client,
 {{supervisor_data,{invalid_strategy,simple_one_for_one_terminate}},
  {amqp_client,start,[normal,[]]}}}
Wed, 8 Jan 2014
[ 12:35 olgeni ] Original commit   Revision:339111
339111 net/rabbitmq/Makefile
339111 net/rabbitmq/distinfo
339111 net/rabbitmq/pkg-plist
- Upgrade to version 3.2.2
- Take over maintainership
- Add staging support

PR:		ports/184036
Submitted by:	olgeni
Approved by:	maintainer timeout
Mon, 23 Dec 2013
[ 21:11 antoine ] Original commit   Revision:337297
337297 net/rabbitmq/Makefile
Fix some symlinks after getting rid of implicit lang/python dependency
Sat, 14 Dec 2013
[ 22:03 wg ] Original commit   Revision:336490
336490 net/rabbitmq/Makefile
net/rabbitmq: fix usage of python

Reported by:	exp-run (PR 184591)
Approved by:	portmgr (blanket)
Fri, 20 Sep 2013
[ 22:10 bapt ] Original commit   Revision:327755
327755 net/3proxy/Makefile
327755 net/44bsd-rdist/Makefile
327755 net/6tunnel/Makefile
327755 net/AquaGatekeeper/Makefile
327755 net/DarwinStreamingServer/Makefile
327755 net/GeoIP/Makefile
327755 net/R-cran-twitteR/Makefile
327755 net/Sockets/Makefile
327755 net/abills/Makefile
327755 net/activemq/Makefile

(Only the first 10 of 1288 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
Sat, 24 Aug 2013
[ 20:04 olgeni ] Original commit   Revision:325310
325310 net/rabbitmq/Makefile
325310 net/rabbitmq/distinfo
325310 net/rabbitmq/files/patch-rabbitmqctl
325310 net/rabbitmq/pkg-plist
Upgrade to version 3.1.5.

PR:		ports/180389 (plus local changes)
Submitted by:	Anton Yuzhaninov <ayuzhaninov@openstat.ru>
Approved by:	maintainer timeout
Mon, 20 May 2013
[ 16:01 wg ] Original commit   Revision:318610
318610 net/rabbitmq/Makefile
318610 net/rabbitmq/distinfo
318610 net/rabbitmq/pkg-plist
- Update to 3.0.4
- Sort pkg-plist
- Trim Makefile header

Changes:
http://www.rabbitmq.com/release-notes/README-3.0.4.txt
http://www.rabbitmq.com/release-notes/README-3.0.3.txt
http://www.rabbitmq.com/release-notes/README-3.0.2.txt
http://www.rabbitmq.com/release-notes/README-3.0.1.txt

PR:		ports/178315
Submitted by:	olgeni
Reviewed by:	culot (mentor), maintainer (timeout, > 14 days)
Thu, 29 Nov 2012
[ 16:13 wxs ] Original commit   Revision:307967
307967 net/rabbitmq/Makefile
307967 net/rabbitmq/distinfo
307967 net/rabbitmq/pkg-plist
Update to 3.0.0.

PR:		ports/173957
Submitted by:	wxs@
Approved by:	maintainer (private mail)
Feature safe:	yes
Wed, 15 Aug 2012
[ 13:37 olgeni ] Original commit 
302574 databases/couchdb/Makefile
302574 net/freeswitch-core-devel/Makefile
302574 net/freeswitch-core/Makefile
302574 net/rabbitmq/Makefile
Patch ports depending on lang/erlang-lite to use lang/erlang instead.

The current lang/erlang option defaults match those specified in
lang/erlang-lite, thus making it redundant. Also, mixing ports
depending on lang/erlang and lang/erlang-lite is impossible without
manual patching.

Hence, lang/erlang-lite is going to be removed.
Thu, 19 Jul 2012
[ 05:36 jgh ] Original commit 
301140 net/rabbitmq/Makefile
301140 net/rabbitmq/distinfo
- update to 2.8.4

PR:     ports/169866
Submitted by:   kenji.rikitake@acm.org
Approved by:    maintainer, pneumann@gmail.com
Fri, 4 May 2012
[ 20:21 jgh ] Original commit 
1.30 net/rabbitmq/Makefile
1.17 net/rabbitmq/distinfo
1.17 net/rabbitmq/pkg-plist
- Update to 2.8.2

PR:     ports/167542
Submitted by:   maintainer, pneumann@gmail.com
Thu, 2 Feb 2012
[ 17:41 jgh ] Original commit 
1.29 net/rabbitmq/Makefile
1.3 net/rabbitmq/files/pkg-install.in
1.16 net/rabbitmq/pkg-plist
- adjust rabbitmq-plugins to use ${PREFIX}/etc in favor of /etc
- while here drop custom user installation in favor of portstree USERS framework

PR:     ports/164671
Submitted by:   maintainer, pneumann at gmail.com
Approved by:    maintainer, crees (mentor)
Sun, 29 Jan 2012
[ 11:04 lwhsu ] Original commit 
1.28 net/rabbitmq/Makefile
1.16 net/rabbitmq/distinfo
- Update to 2.7.1
- Checking dependency with bin/erl, allows building while erlang
  (not -lite version) installed
- Pet portlint(1)

PR:             ports/164532
Submitted by:   lwhsu
Approved by:    Phillip Neumann <pneumann@gmail.com> (maintainer)
Thu, 10 Nov 2011
[ 03:42 clsung ] Original commit 
1.27 net/rabbitmq/Makefile
1.15 net/rabbitmq/distinfo
1.15 net/rabbitmq/pkg-plist
Update to version 2.7.0

New features in this release include:

- order preserved of messages re-queued for a consumer
- plugins are included in the main rabbitmq-server release, with a new
  command, rabbitmq-plugins, to enable and disable them
- clients accept a new "amqp" URI scheme for connections
- significant performance improvements to connection creation, durable
  queues, message storage, and large numbers of consumers
- thread-safe Java client consumer callbacks

This version contains the main plugin, so you dont have to install them
separate.
Just need to enable them via rabbitmq-plugins.

PR:             ports/162410
Submitted by:   maintainer (Phillip)
Wed, 19 Oct 2011
[ 05:13 culot ] Original commit 
1.26 net/rabbitmq/Makefile
1.14 net/rabbitmq/distinfo
- Update to 2.6.1

PR:             ports/161757
Submitted by:   Phillip Neumann <pneumann@gmail.com> (maintainer)
Wed, 7 Sep 2011
[ 19:41 crees ] Original commit 
1.25 net/rabbitmq/Makefile
1.13 net/rabbitmq/distinfo
1.14 net/rabbitmq/pkg-plist
Update to 2.6.0

PR:             ports/160336
Submitted by:   Phillip <pneumann@gmail.com> (maintainer)
Wed, 31 Aug 2011
[ 12:36 crees ] Original commit 
1.24 net/rabbitmq/Makefile
1.8 net/rabbitmq/files/rabbitmq.in
Make rabbitmq wait for pid after stopping; stops restarting problems.

PR:             ports/160027
Submitted by:   Nicolas Szalay <nico@rottenbytes.info>
Approved by:    Phillip Neumann <pneumann@gmail.com> (maintainer)
Wed, 10 Aug 2011
[ 19:00 swills ] Original commit 
1.23 net/rabbitmq/Makefile
1.12 net/rabbitmq/distinfo
1.4 net/rabbitmq/files/patch-rabbitmqctl
1.2 net/rabbitmq/files/patch-src-rabbit_networking-erl
1.7 net/rabbitmq/files/rabbitmq.in
1.13 net/rabbitmq/pkg-plist
- Update to 2.5.1

PR:             ports/159364
Submitted by:   Andrew <andrew@flarn.com>
Approved by:    Phillip Neumann <pneumann@gmail.com> (maintainer) (with changes)
Tue, 14 Jun 2011
[ 19:34 swills ] Original commit 
1.22 net/rabbitmq/Makefile
1.1 net/rabbitmq/files/patch-src-rabbit_networking-erl
- Fix build

PR:             ports/157422
Submitted by:   Antoine van Gelder <antoine@artifactual.org.za>
Approved by:    Phillip Neumann <pneumann@gmail.com> (maintainer)
Mon, 13 Jun 2011
[ 21:25 pav ] Original commit 
1.21 net/rabbitmq/Makefile
- Mark BROKEN: does not build

Reported by:    pointyhat
Mon, 7 Mar 2011
[ 20:17 az ] Original commit 
1.20 net/rabbitmq/Makefile
Fix configuration directory location.

PR:             ports/153773
Submitted by:   Davide De Rosa <famoqua+freebsd@gmail.com>,
                Chris Rees <utisoft@gmail.com>
Approved by:    Phillip Neumann <pneumann@gmail.com> (maintainer)
Wed, 9 Feb 2011
[ 20:12 culot ] Original commit 
1.19 net/rabbitmq/Makefile
1.11 net/rabbitmq/distinfo
1.12 net/rabbitmq/pkg-plist
- Update to 2.3.1

PR:             ports/154556
Submitted by:   Phillip Neumann <pneumann AT gmail.com> (maintainer)
Approved by:    sahil@/wen@ (mentors, implicit)
Thu, 13 Jan 2011
[ 06:09 wen ] Original commit 
1.18 net/rabbitmq/Makefile
1.10 net/rabbitmq/distinfo
1.3 net/rabbitmq/files/patch-rabbitmqctl
1.11 net/rabbitmq/pkg-plist
- Update to 2.2.0

PR:             ports/153928
Submitted by:   Phillip <pneumann@gmail.com> (maintainer)
Feature safe:   yes
Mon, 27 Sep 2010
[ 20:40 olgeni ] Original commit 
1.11 databases/couchdb/Makefile
1.9 databases/erlang-mysql/Makefile
1.34 devel/distel/Makefile
1.9 devel/erlang-thrift/Makefile
1.43 devel/esdl/Makefile
1.35 graphics/wings-devel/Makefile
1.35 graphics/wings/Makefile
1.39 net-im/ejabberd/Makefile
1.17 net/erlang_xmlrpc/Makefile
1.17 net/rabbitmq/Makefile

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION in Erlang dependent ports, which need to be rebuilt
due to the new beam format.
Sun, 19 Sep 2010
[ 12:46 makc ] Original commit 
1.16 net/rabbitmq/Makefile
1.9 net/rabbitmq/distinfo
1.2 net/rabbitmq/files/patch-src-rabbitmulti.erl
1.10 net/rabbitmq/pkg-plist
Update to 2.1.0

PR:             ports/150678
Submitted by:   Phillip Neumann (maintainer)
Thu, 9 Sep 2010
[ 12:38 pav ] Original commit 
1.15 net/rabbitmq/Makefile
1.8 net/rabbitmq/distinfo
1.2 net/rabbitmq/files/patch-rabbitmqctl
1.1 net/rabbitmq/files/patch-src-rabbitmulti.erl
1.9 net/rabbitmq/pkg-plist
- Update to 2.0.0

PR:             ports/150168
Submitted by:   Phillip Neumann <pneumann@gmail.com> (maintainer)
Wed, 25 Aug 2010
[ 19:26 pav ] Original commit 
1.14 net/rabbitmq/Makefile
- Disallow on pointyhat due to beam.smp hangs
Thu, 22 Jul 2010
[ 13:33 wxs ] Original commit 
1.13 net/rabbitmq/Makefile
1.7 net/rabbitmq/distinfo
1.1 net/rabbitmq/files/patch-rabbitmqctl
1.2 net/rabbitmq/files/pkg-message.in
1.8 net/rabbitmq/pkg-plist
Update to 1.8.0

PR:             ports/148456
Submitted by:   Phillip <pneumann@gmail.com> (maintainer)
Tue, 13 Oct 2009
[ 08:49 dhn ] Original commit 
1.12 net/rabbitmq/Makefile
1.6 net/rabbitmq/distinfo
1.7 net/rabbitmq/pkg-plist
- Update to 1.7.0

PR:             ports/139550
Submitted by:   Phillip N. <pneumann@gmail.com> (maintainer)
Sat, 4 Jul 2009
[ 17:59 bms ] Original commit 
1.11 net/rabbitmq/Makefile
1.2 net/rabbitmq/files/pkg-install.in
1.1 net/rabbitmq/files/pkg-message.in
Use pkg-message.in instead of post-install so it will appear in a
binary package.
Push UID/GID/group/user substitutions into Makefile, use SUBST_LIST.
Tidy up variable definitions in Makefile.

Suggested by:   wxs
[ 12:40 bms ] Original commit 
1.10 net/rabbitmq/Makefile
Add a note about rabbitmqctl and how to use it properly to the
post-install target.
[ 12:21 bms ] Original commit 
1.9 net/rabbitmq/Makefile
Fix substitution for port's /etc directory location.
Use LOCALBASE, not PREFIX, for previously installed ports (i.e. Erlang).
I'm not going to fix the man pages, for the moment.
Wed, 24 Jun 2009
[ 09:05 bms ] Original commit 
1.8 net/rabbitmq/Makefile
1.5 net/rabbitmq/distinfo
1.6 net/rabbitmq/pkg-plist
Update to 1.6.0 beta release.
Qpid Python broker test runs largely as expected.
Tue, 9 Jun 2009
[ 07:11 bms ] Original commit 
1.7 net/rabbitmq/Makefile
Remove erroneous whitespace.
Explicitly fix permissions of BEAM files in pre-install target.
[ 06:55 bms ] Original commit 
1.6 net/rabbitmq/Makefile
1.4 net/rabbitmq/distinfo
1.5 net/rabbitmq/pkg-plist
Update to release 1.5.5 by request.
 * Update distinfo.
 * Fix pkg-plist.
 * Add MANCOMPRESSED.
 * Remove trailing whitespace from Makefile.
 * Observation: rc.d script assumes cwd is +x for ${rabbitmq_user} when run.
Tue, 30 Dec 2008
[ 10:57 miwi ] Original commit 
1.5 net/rabbitmq/Makefile
1.3 net/rabbitmq/distinfo
1.2 net/rabbitmq/files/patch-Makefile
1.4 net/rabbitmq/files/rabbitmq.in
1.4 net/rabbitmq/pkg-plist
- Update to 1.5.0

PR:             129751
Submitted by:   "Phillip N." <pneumann@gmail.com> (maintainer)
Wed, 29 Oct 2008
[ 01:01 wxs ] Original commit 
1.64 GIDs
1.76 UIDs
1.4 net/rabbitmq/Makefile
1.3 net/rabbitmq/files/rabbitmq.in
- Add UID and GID entries for net/rabbitmq.
- Convince RC script to use rabbitmq user.

PR:             ports/128108
Submitted by:   Nick Barkas <snb@threerings.net>
Approved by:    Phillip N. <pneumann@gmail.com> (maintainer)
Wed, 3 Sep 2008
[ 15:51 amdmi3 ] Original commit 
1.3 net/rabbitmq/Makefile
1.2 net/rabbitmq/files/rabbitmq.in
1.3 net/rabbitmq/pkg-plist
- Change rabbitmq to rabbitmq_server in TARGET_DIR to match rabbitmq install
docs recommendation
- Fix rcscript
- Create var/etc dirs on package installation and correctly dirrmtry them on
deinstallation

PR:             127033
Submitted by:   Barry Pederson <bp at barryp dot org>
Approved by:    "Phillip N." <pneumann at gmail dot com> (maintainer)
Wed, 20 Aug 2008
[ 02:46 vanilla ] Original commit 
1.2 net/rabbitmq/Makefile
1.2 net/rabbitmq/distinfo
1.1 net/rabbitmq/files/patch-Makefile
1.2 net/rabbitmq/pkg-plist
Upgrade to 1.4.0.

PR:             ports/126560
Submitted by:   maintainer
Mon, 14 Jul 2008
[ 01:51 vanilla ] Original commit 
1.2020 net/Makefile
1.1 net/rabbitmq/Makefile
1.1 net/rabbitmq/distinfo
1.1 net/rabbitmq/files/rabbitmq.in
1.1 net/rabbitmq/pkg-descr
1.1 net/rabbitmq/pkg-plist
Add rabbitmq 1.3.0, rabbitMQ is an implementation of AMQP.

PR:             ports/125553
Submitted by:   Phillip Neumann <pneumann at gmail.com>

Number of commits found: 79

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
mailmanAug 29
libxml2Aug 28
kdelibs4Aug 27
eogAug 22
p5-PathTools*Aug 22
p5-XSLoader*Aug 22
perl5-devel*Aug 22
perl5-devel*Aug 22
perl5-devel*Aug 22
perl5.18*Aug 22
perl5.18*Aug 22
perl5.18*Aug 22
perl5.20*Aug 22
perl5.20*Aug 22
perl5.20*Aug 22

12 vulnerabilities affecting 48 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 26191
Broken 93
Deprecated 144
Ignore 363
Forbidden 0
Restricted 199
No CDROM 83
Vulnerable 65
Expired 18
Set to expire 130
Interactive 0
new 24 hours 3
new 48 hours9
new 7 days30
new fortnight51
new month116

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.