FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
tn5250 0.17.4_1 net on this many watch lists=4 search for ports that depend on this port
5250 Telnet protocol and Terminal

There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org search for ports maintained by this maintainer
Port Added: unknown
License: not specified in port


tn5250 is an implementation of the 5250 Telnet protocol.
It provides 5250 library and 5250 terminal emulation.
(usually used to connect to IBM AS/400 Midrange systems)

WWW: http://tn5250.sourceforge.net/
SVNWeb : Main Web Site : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.

Required To Build:
  1. security/openssl
Required To Run:
  1. security/openssl
There are no ports dependent upon this port

To install the port: cd /usr/ports/net/tn5250/ && make install clean
To add the package: pkg install net/tn5250


Configuration Options
     No options to configure

Master Sites:
  1. http://aarnet.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  2. http://distcache.FreeBSD.org/ports-distfiles/
  3. http://downloads.sourceforge.net/project/tn5250/tn5250/0.17.4/
  4. http://freefr.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  5. http://garr.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  6. http://heanet.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  7. http://hivelocity.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  8. http://ignum.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  9. http://internode.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  10. http://iweb.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  11. http://jaist.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  12. http://kaz.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  13. http://kent.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  14. http://master.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  15. http://nchc.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  16. http://ncu.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  17. http://netcologne.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  18. http://sunet.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  19. http://superb-dca3.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  20. http://switch.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  21. http://tenet.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  22. http://ufpr.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/
  23. http://waix.dl.sourceforge.net/project/tn5250/tn5250/0.17.4/

Number of commits found: 34

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
30 May 2014 17:43:12
Original commit files touched by this commit  0.17.4_1
Revision:355881
amdmi3 search for other commits by this committer
- Switch to USES=libtool, drop .la files
- Strip libraries
31 Jan 2014 07:18:28
Original commit files touched by this commit  0.17.4
Revision:341925
miwi search for other commits by this committer
- Stage support
20 Sep 2013 22:10:25
Original commit files touched by this commit  0.17.4
Revision:327755
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
20 Mar 2011 12:54:45
Original commit files touched by this commit  0.17.4
miwi search for other commits by this committer
- Get Rid MD5 support
04 Dec 2010 07:34:27
Original commit files touched by this commit  0.17.4
ade search for other commits by this committer
Sync to new bsd.autotools.mk
21 Dec 2009 02:19:12
Original commit files touched by this commit  0.17.4
dougb search for other commits by this committer
For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.
02 Aug 2009 19:36:34
Original commit files touched by this commit  0.17.4
mezz search for other commits by this committer
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
14 Jan 2009 16:00:36
Original commit files touched by this commit  0.17.4
miwi search for other commits by this committer
-Update to 0.17.4

PR:             130463
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
21 Aug 2008 06:18:49
Original commit files touched by this commit  0.17.3_1
rafan search for other commits by this committer
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above View all of this commit message)
20 Mar 2008 09:56:52
Original commit files touched by this commit  0.17.3_1
pav search for other commits by this committer
- Remove USE_GETOPT_LONG which is a no-op since March 2007
28 Jan 2007 09:07:47
Original commit files touched by this commit  0.17.3_1
kris search for other commits by this committer
Use libtool port instead of included one to avoid objformat a.out botch
15 Aug 2006 00:56:24
Original commit files touched by this commit  0.17.3_1
clsung search for other commits by this committer
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include misc/ multimedia/ net/ net-mgmt/ net-im/
  net-p2p/ palm/ print/ science/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>
23 Feb 2006 10:40:45
Original commit files touched by this commit  0.17.3_1
ade search for other commits by this committer
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
25 Nov 2005 16:48:31
Original commit files touched by this commit  0.17.3
pav search for other commits by this committer
- Add SHA256
15 Nov 2005 06:52:12
Original commit files touched by this commit  0.17.3
ade search for other commits by this committer
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
06 Jun 2005 18:20:49
Original commit files touched by this commit  0.17.3
pav search for other commits by this committer
- Update to 0.17.3

PR:             ports/81960
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
02 Jun 2005 20:28:41
Original commit files touched by this commit  0.16.5
oliver search for other commits by this committer
change the libtool version to use from 1.3 to 1.5
09 Jul 2004 17:43:11
Original commit files touched by this commit  0.16.5
marcus search for other commits by this committer
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet
17 Mar 2004 18:29:46
Original commit files touched by this commit  0.16.5
trevor search for other commits by this committer
SIZEify.
14 Mar 2004 06:17:56
Original commit files touched by this commit  0.16.5
ade search for other commits by this committer
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
29 Jul 2003 18:42:41
Original commit files touched by this commit  0.16.5
naddy search for other commits by this committer
Fix gcc 3.3 compile failure.

Submitted by:   Simon Barner <barner@in.tum.de>
20 Feb 2003 18:51:13
Original commit files touched by this commit  0.16.5
knu search for other commits by this committer
De-pkg-comment.
10 Aug 2002 17:17:21
Original commit files touched by this commit  0.16.5
ijliao search for other commits by this committer
upgrade to 0.16.5

PR:             41505
Submitted by:   Ports Fury
23 Jun 2002 06:04:01
Original commit files touched by this commit  0.16.4
ijliao search for other commits by this committer
Replace ${PERL} with ${REINPLACE_CMD}

PR:             39668
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>
11 Jun 2002 00:29:47
Original commit files touched by this commit  0.16.4
pat search for other commits by this committer
Update to 0.16.4

PR:             38231
Submitted by:   KATO Tsuguru <tkato@prontomail.com>
16 Mar 2002 07:32:43
Original commit files touched by this commit  0.16.3_1
pat search for other commits by this committer
Add missing manpage entries

PR:             35964
Submitted by:   KATO Tsuguru <tkato@prontomail.com>
17 Dec 2001 19:27:57
files touched by this commit
ijliao search for other commits by this committer
upgrade to 0.16.3    
25 Aug 2001 00:23:59
files touched by this commit
dwcjr search for other commits by this committer
Update 0.16.2    
06 Jan 2001 16:25:04
files touched by this commit
kevlo search for other commits by this committer
Update to 0.16.1    
19 Dec 2000 08:07:58
files touched by this commit
sobomax search for other commits by this committer
- Update to version 0.16.0.    
08 Oct 2000 07:19:09
files touched by this commit
asami search for other commits by this committer
Convert category net to new layout.  
16 Jun 2000 22:52:41
files touched by this commit
asami search for other commits by this committer
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    
16 Jun 2000 09:19:52
files touched by this commit
sobomax search for other commits by this committer
Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I  
just cun'n'pasted the name from Satoshi's commit message without checking   it. 
  
15 Jun 2000 17:44:17
files touched by this commit
sobomax search for other commits by this committer
First round of INSTALL_SHLIB fixes.    

Number of commits found: 34

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
php53Aug 18
phpmyadminAug 17
chromiumAug 13
serfAug 11
subversionAug 11
subversion17Aug 11
nginxAug 09
nginx-develAug 09
mingw32-opensslAug 06
opensslAug 06
krfbAug 03
gpgmeAug 02
samba4Aug 02
samba41Aug 02
kdelibs4Jul 31

7 vulnerabilities affecting 11 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24476
Broken 229
Deprecated 825
Ignore 571
Forbidden 36
Restricted 261
No CDROM 101
Vulnerable 23
Expired 0
Set to expire 812
Interactive 0
new 24 hours 0
new 48 hours7
new 7 days39
new fortnight153
new month215

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.