21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

news: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam David <adam@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrey Slusar <anray@FreeBSD.org>
  *  Brian Somers <brian@FreeBSD.org>
  *  Carey Jones <mcj@acquiesce.org>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Donald Burr <dburr@FreeBSD.org>
  *  Frederic Cambus
  *  George Sorsby <george@crackpipe.net>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  John Holland <john@zoner.org>
  *  Jun-ichiro itojun Itoh <itojun@itojun.org>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Lasse L. Johnsen (lasse@freebsdcluster.org)
  *  Lewis Thompson <purple@lewiz.net>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Max Khon
  *  Michael L. Hostbaek <mich@freebsdcluster.org>
  *  Mikolaj Rydzewski <miki@ceti.pl>
  *  Noritaka Ishizumi <graphite@taurus.bekkoame.or.jp>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Pete Fritchman <petef@databits.net>
  *  Ralf van der Enden <tremere@cainites.net>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Thierry Thomas <tthomas@mail.dotcom.fr>
  *  Tim Welch <ports@thepentagon.org>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yen-Ming Lee <leeym@cae.ce.ntu.edu.tw>
  *  adam
  *  asaddi@philosophysw.com
  *  bkhl@elektrubadur.se
  *  gary@hayers.org
  *  ijliao
  *  kbowling
  *  obrien@cs.ucdavis.edu
  *  proff@suburbia.net
  *  smace
  *  torstenb

With hat:	portmgr

    4f7ba00

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

01:22 wen 

- Update to 0.09
Changes: https://metacpan.org/changes/distribution/News-Article-NoCeM
- Add LICENSE

 

08:40 mat 

Remove all := from BUILD_DEPENDS, here are never needed.

While there, cleanup, and sort depends.

When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS.  In order of preference, they are:

1) use RUN_DEPENDS to set BUILD_DEPENDS:

BUILD_DEPENDS=	${RUN_DEPENDS}
RUN_DEPENDS=	foo:bar/baz

2) create another variable and use it:

MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS=	${MY_DEPENDS}
RUN_DEPENDS=	${MY_DEPENDS}

3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:

BUILD_DEPENDS=	foo:bar/baz
RUN_DEPENDS:=	${BUILD_DEPENDS}

Sponsored by:	Absolight

 

20:13 adamw 

Reassign to the perl collective

 

20:04 rene 

leeym handed in his commit bit.

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

12:13 olgeni 

Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category N.

CR:		D307
Approved by:	portmgr (bapt)

 

12:30 az 

- stage support

Approved by:	portmgr (blanket infrastructure)

 

22:31 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
news)

 

09:22 az 

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

 

18:18 az 

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

18:42 swills 

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

14:30 araujo 

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

06:12 leeym 

- Update to 0.08

PR:             99569
Submitted by:   clsung
Approved by:    leeym

18:09 leeym 

- update to 0.07

13:31 leeym 

- update to p5-News-Article-NoCeM-0.06

04:13 leeym 

update to News::Article::NoCeM 0.04

00:19 leeym 

- correct pkg-plist

Noticed by:     kris

06:37 leeym 

add News::Article::NoCeM 0.03

News::Article::NoCeM is a library of perl modules for managing NoCeM notice in
Network News services. It's meant to be used for code-reuse and sharing when
writing news-based applications.