A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 51

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 0.12.2

PR:             114521
Submitted by:   Alex Samorukov <samm@os2.kiev.ua> (maintainer)

Fix build on FreeBSD 4.x.

PR:             ports/104320 (partial)
Submitted by:   "Alex Samorukov" <samm@os2.kiev.ua> (maintainer)

- Record -pthread requirement in pkg-config file, if threads are turned on
- USB always needs threads turned on

PR:             ports/104064

add usb support
add more master site

PR:             103504
Submitted by:   maintainer

upgrade to 0.12.1
take maintainership

PR:             103211
Submitted by:   Alex Samorukov <samm@os2.kiev.ua>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include misc/ multimedia/ net/ net-mgmt/ net-im/
  net-p2p/ palm/ print/ science/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Revert my last commit, i didn't test it accordingly and this version is not
backward compatible and is a prerelease too. Sorry.

Asked by:       lofi

- Update to 0.12.0-pre4
- Add OPTIONS to THREAD, PNG and PERL
- Pass maintainership to submitter

PR:             ports/92570
Submitted by:   Alex Samorukov <samm@os2.kiev.ua>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

change the libtool version to use from 1.3 to 1.5

Optionalize building of tcl/tk bindings.

Make TCL_VER a knob. Default it to 8.4, there for bump PORTREVISION.

- Use USE_ICONV knob

Approved by:    portmgr

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION for read-todos output format fix.

Follow portlint's suggestion about using MASTER_SITE_GENTOO.

Use LOCALBASE rather than hardcoded /usr/local.

Remove trailing whitespace (portlint).

- Chase master sites (fix fetching)

PR:             ports/60374
Reported by:    Stacey Roberts <stacey@vickiandstacey.com>

Update pilot-link port to 0.11.8.

While doing so, fix tcl support; let the configure script do the
job of configuring tcl support.

Reset maintainer on ports maintained by the following non-ports committers,
who did not respond to my email confirming whether they have an active
interest in maintaining the port:

  sue reg rv jmb dima reg horikawa msmith jhs ue

get rid of libgnugetopt dependency for -CURRENT,
use USE_GETOPT_LONG instead.

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

I forgot. Bump portrevision because I modified the plist.

Finish fixing this port so I can build kdepim. Maintainer notified.
The plist was wrong, the list of manpages was wrong. And initially,
it would not build. What happened to testing?

Fix LIBS/LDFLAGS so port will build. Maintainer notified. I need the]
port now for kdepim.

Update to version 0.11.7.

Upgrade to 0.11.4.

Fix plist.

Upgrade to 0.11.3

Approved by:    dima

Iconv cleanup, stage 2b: remove regex hacks that change iconv.h to giconv.h and
-liconv to -lgiconv.

Bump PORTREVISION to reflect the (lib)iconv upgrade.

Iconv cleanup, stage 1b: correct {BUILD,LIB,RUN}_DEPENDS of all ports that need
libiconv.

- Don't install useless now ${PREFIX}/etc/rc.d/pilot-link.sh. Bump    
PORTREVISION;   - s/freebsd\.org/FreeBSD.org/ while I'm here.    

Make pilot-link install directly into PREFIX.  This should allow   pilot-link
and all dependents to build correctly on bento.    

Make this port PREFIX clean.  Required for KDE 2.2.2 upgrade, as well as  
conformance to the Porter's Handbook.  Bump PORTREVISION to reflect   fixes in
packaging.    

Upgrade to 0.9.5, use -lgiconv.    

- Add write permission at post-patch stage to be able to build     by non-root
users.   - Remove -O flag from CFLAGS due to c++'s optimization bug.    

Fix typo @{$SED} -> @${SED}    

Fix install path.    

rc script fix (supports start/stop thingie now)    

USE_LIBTOOL implies GNU_CONFIGURE, so remove redundant GNU_CONFIGURE lines.    

Add an etc/rc.d startup file to ldconfig the pilot-link   libraries at system
reboot, since they're installed in   a non-standard place.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I  
just cun'n'pasted the name from Satoshi's commit message without checking   it. 
  

Third round of INSTALL_SHLIBS=yes fixes.    

Add mirror.    

Number of commits found: 51

14 vulnerabilities affecting 30 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities