cups-magicolor 1.5.0_2 print =1

CUPS support for the Konica-Minolta Magicolor 2430DL
Maintained by: frank@exit.com
Port Added: 08 Oct 2005 20:27:42

---

---

The Konica-Minolta MagiColor 2430DL is one of the few color laser printers
that fully supports open source.  They have provided a CUPS filter,
rastertokmlf, that translates the CUPS raster format to the PCL-like
"LavaFlow" format expected by the printer.  The filter uses littleCMS
for color matching and their package also provides a complete PPD file
for the 2430DL.

The FreeBSD port patches the original package to take advantage of the
actual configuration of CUPS (the original package depended on a static
configuration based on CUPS 1.1.15) and to put the various files in their
proper places according to FreeBSD standards.

WWW: http://konicaminolta.net/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

Required To Build: devel/gmake, devel/automake19, devel/autoconf261
Required To Run: print/cups-pstoraster
Required Libraries: print/cups-base, graphics/jbigkit, graphics/lcms

---

To install the port: cd /usr/ports/print/cups-magicolor/ && make install clean
To add the package: pkg_add -r cups-magicolor

---

Configuration Options

     No options to configure

---

Master Sites:

http://printer.konicaminolta.net/drivers/linux/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

Remove always-false/true conditions based on OSVERSION 500000

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Fix Build

PR:             ports/106492
Submitted by:   Frank Mayhar <frank@exit.com> (maintainer)
                pointyhat

- Update to 1.5.0

PR:             ports/106293
Submitted by:   Frank Mayhar <frank@exit.com> (maintainer)

Remove USE_REINPLACE from all categories starting with P

s/PATCH_DEPEND/BUILD_DEPEND/ so that the dependencies are present for
the :configure target

SHA256ify

Approved by: krion@

This port provides full CUPS support for the Konica-Minolta Magicolor 2430DL
color laser printer using the manufacturer's open-source CUPS filter.

PR:             ports/84319
Submitted by:   Frank Mayhar <frank@exit.com>

8 vulnerabilities affecting 22 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities