non port: print/dot2tex/Makefile |
Number of commits found: 21 |
Tuesday, 27 Jun 2023
|
19:34 Rene Ladan (rene)
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
3d9a815 |
Monday, 19 Dec 2022
|
14:44 Muhammad Moinur Rahman (bofh)
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
721e577 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 20 Jul 2022
|
14:22 Tobias C. Berner (tcberner)
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz>
* Anton Berezin <tobez@tobez.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Bruce M. Simpson <bms@FreeBSD.org>
* CHOI Junho <cjh@FreeBSD.org>
* Chuck Robey <chuckr@FreeBSD.org>
* D'Arcy Cain <darcy@druid.net>
* David O'Brien (obrien@NUXI.com)
* David O'Brien <obrien@FreeBSD.org>
* David O'Brien <obrien@cs.ucdavis.edu>
* Dima Dorfman <dima@unixfreak.org>
* Dmitry Kazarov <d.y.kazarov@mail.ru>
* Dmitry Sivachenko <dima@Chg.RU>
* Emanuel Haupt <ehaupt@FreeBSD.org>
* Fabiano Sidler <fabianosidler@swissonline.ch>
* Fernan Aguero <fernan.aguero@gmail.com>
* Fernan Aguero <fernan@iib.unsam.edu.ar>
* Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
* Golyashov Sergey <svvord@soft-wizard.ru>
* Gvozdikov Veniamin <g.veniamin@googlemail.com>
* Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
* Igor Pokrovsky <tiamat@comset.net>
* James Bailie <jimmy@mammothcheese.ca>
* Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
* Jean-Sebastien Roy <js@jeannot.org>
* Joe Marcus Clarke <marcus@FreeBSD.org>
* Joel Sutton <jsutton@bbcon.com.au>
* Joerg Wunsch <joerg@FreeBSD.org>
* Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
* Jose Jachuf <jjachuf@gmail.com>
* Joseph Koshy <jkoshy@FreeBSD.org>
* Juergen Lock <nox@jelal.kn-bremen.de>
* Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
* KANOU Hiroki <kanou@khdd.net>
* KATO Tsuguru <tkato@prontomail.com>
* Kapil Chowksey
* Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
* Kimura Fuyuki <fuyuki@hadaly.org>
* Klemm <andreas@klemm.gtn.com>
* Koop Mast <kwm@FreeBSD.org>
* Kozlov Sergey <kozlov.sergey.404@gmail.com>
* Lars Koeller
* Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
* Mark Pulford <mark@kyne.com.au>
* Mark Reidel <ports@mark.reidel.info>
* Martin Dieringer <martin.dieringer@gmx.de>
* Martin Kammerhofer
* Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
* Martin Ranne <gasp@ridcully.dnsalias.org>
* Matthew Hunt <mph@pobox.com>
* Maxim Loginov <Zeliboba@mail.ru>
* Michael Johnson <ahze@FreeBSD.org>
* Michael Moll <kvedulv at kvedulv.de>
* Michael Nottebrock <lofi@FreeBSD.org>
* Mike Meyer <mwm@mired.org>
* Mikhail Teterin
* Mita Yoshio <mita@FreeBSD.org>
* Nicola Vitale <nivit@email.it>
* Oliver Braun <obraun@informatik.unibw-muenchen.de>
* Oliver Breuninger <ob@seicom.NET>
* Olivier Cochard-Labbe <olivier@FreeBSD.org>
* Patrick Dung (patrick_dkt@yahoo.com.hk)
* Patrick Powell <papowell@astart.com>
* Pedro Giffuni
* Philip M. Gollucci <pgpollucci@p6m7g8.com>
* Piotr Kubaj <pkubaj@anongoth.pl>
* Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* Robert Withrow <witr@rwwa.com>
* Romain Tartiere <romain@FreeBSD.org>
* Satoshi Asami <asami@FreeBSD.org>
* Satoshi TAOKA <taoka@FreeBSD.org>
* Satoshi Taoka <taoka@FreeBSD.org>
* Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
* Simon 'corecode' Schubert <corecode@corecode.ath.cx>
* Simun Mikecin <numisemis@yahoo.com>
* Stefan Esser <se@FreeBSD.org>
* Stefan Hagen <ports@textmail.me>
* Stephen Fisher
* Steve Wills <swills@FreeBSD.org>
* Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* TAKATSU Tomonari <tota@FreeBSD.org>
* Thierry Thomas <thierry@pompo.net>
* Thomas Gellekum <tg@FreeBSD.org>
* Tim McCormick <tim@pcbsd.org>
* Tomokatsu SAITO <saito@a2z.co.jp>
* Veniamin Gvozdikov <vg@FreeBSD.org>
* Wen Heping <wenheping@gmail.com>
* Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
* amistry@am-productions.biz
* andrew@scoop.co.nz
* arved
* brett@peloton.physics.montana.edu
* chuckr@FreeBSD.org
* cjm2
* dbader@eece.unm.edu
* dgilbert@velocet.ca
* e-masson@kisoft-services.com
* eserte@cs.tu-berlin.de
* gahr
* giffunip
* hrs
* ijliao
* jmz
* joerg
* johans
* jseger@FreeBSD.org
* kline
* ljo
* lofi@FreeBSD.org
* martin.dieringer@gmx.de
* mwest@uct.ac.za
* oly@world.std.com
* patrick, trevor
* smace@FreeBSD.org
* spcoltri@unm.edu
* tg@FreeBSD.org
* tobez
* wenheping@gmail.com
With hat: portmgr
51879c9 |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Monday, 28 Dec 2020
|
23:02 antoine
Drop python 2.7 support from a few ports
With hat: portmgr
|
Wednesday, 3 Jul 2019
|
22:50 tota
- Update to 2.11.3
PR: 237984
Submitted by: Greg V <greg_AT_unrelenting_DOT_technology>
|
Monday, 1 Jul 2019
|
06:56 koobs
print/dot2tex: Fix incorrect Python version spec
dot2tex supports Python 2 and 3. This change removes the unecessary version
spec restriction to 2.7.
While I'm here:
- Add PKGNAMEPREFIX (unique package names per flavor)
- Enable USE_PYTHON=concurrent, each package flavor installs scripts in
common locations
- Add TEST_DEPENDS/test target
- Add python to CATEGORIES
- Pet portlint (Make file sort/group order)
PR: 237984
Approved by: portmgr (maintainer timeout: 1 month)
MFH: 2019Q2 (blanket(s): ports (& Python) compliance)
|
Wednesday, 20 Jun 2018
|
17:05 mat
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight
|
Thursday, 30 Nov 2017
|
15:50 mat
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464
|
Sunday, 3 Apr 2016
|
13:11 mat
Remove ${PORTSDIR}/, again.
With hat: tota
Sponsored by: Absolight
|
11:00 tota
- Update to 2.9.0
- Restrict Python version and pyparsing version
- Switch from GOOGLE_CODE to USE_GITHUB
- Add LICENSE section
- Add NO_ARCH
- Update WWW in pkg-descr
- Make portlint happy
- Take maintainership
PR: 208477
Submitted by: tota@ (myself)
Approved by: romain@ (maintainer)
|
Friday, 1 Apr 2016
|
14:16 mat
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Wednesday, 4 Nov 2015
|
20:11 sunpoet
- Move devel/py-parsing to devel/py-pyparsing
- Change MASTER_SITES to CHEESESHOP
- Remove DISTNAME
- While I'm here, remove duplicate PORTREVISION for security/py-crits/Makefile
|
Thursday, 14 May 2015
|
10:15 mat
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
Friday, 24 Oct 2014
|
16:43 mva
- Convert ports of news/ and print/ to new USES=python
Approved by: portmgr (implicit)
|
Sunday, 30 Mar 2014
|
14:50 bapt
Support stage
|
Monday, 10 Mar 2014
|
16:45 bapt
Convert p* to USES=zip
|
Friday, 20 Sep 2013
|
22:44 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
print)
|
Friday, 1 Jun 2012
|
05:26 dinoex
- update png to 1.5.10
|
Tuesday, 14 Sep 2010
|
09:27 romain
The purpose of dot2tex is to give graphs generated by Graphviz a more LaTeX
friendly look and feel. This is accomplished by converting xdot output from
Graphviz to a series of PSTricks or PGF/TikZ commands. This approach allows:
- Typesetting labels with LaTeX, allowing mathematical notation.
- Using native PSTricks and PGF/TikZ commands for drawing arrows (optional).
- Using backend specific styles to customize the output
WWW: http://www.fauskes.net/code/dot2tex/
|
Number of commits found: 21 |