Number of commits found: 34

* print/ghostscript-* and related ports have been renamed in the
  following way:

        print/ghostscript-gnu -> print/ghostscript7
        print/ghostscript-gnu-nox11 -> print/ghostscript7-nox11
        print/ghostscript-gnu-commfont -> print/ghostscript7-commfont
        print/ghostscript-gpl -> print/ghostscript8
        print/ghostscript-gpl-nox11 -> print/ghostscript8-nox11
        japanese/ghostscript-gnu-jpnfont -> print/ghostscript7-jpnfont
        korean/ghostscript-gnu-korfont -> print/ghostscript7-korfont

* USE_GHOSTSCRIPT now supports a version number which the port
  requires.  The valid value is "7" or "8".  If other value is
  specified, value of WITH_GHOSTSCRIPT_VER is used.

* WITH_GHOSTSCRIPT_GNU has been removed in favor of
  WITH_GHOSTSCRIPT_VER.  The valid value of WITH_GHOSTSCRIPT_VER is
  "7" or "8", and the default value is "8".

Approved by:    portmgr (pav)

- Add SHA256

- Update MASTER_SITES for MD2K driver
- Remove HPDJ driver completely (officially discontinued)
- Add KRGB support patch for IJS driver
- Bump GS_REVISION

Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
Tested by:      Jose M Rodriguez <josemi@freebsd.jazztel.es>
PR:             ports/81962

- Update gimp-print to 4.2.7
- Correct merge cups/pstoraster patches

PR:             ports/76569
Submitted by:   Jose M Rodriguez (freebsd) <josemi@freebsd.jazztel.es>

Update EPLASER driver to version 3.1.4

PR:             ports/68391
Submitted by:   Ports Fury

o Remove ghostscript-fonts and Add dependency on print/gsfonts.
o Update gimp-print to 4.2.6.
o Fix implicit dependency on cups/ijs.

PR:             ports/67574
Submitted by:   Jose M Rodriguez <freebsd@wanadoo.es>

SIZEify.

- Replace HP2200 driver (currently unavailable at master site)
  with HP8XX driver
- Update ghotscript-fonts-std to version 8.11
- Update EPLASER driver to version 3.1.4
- Fix minor bug in paparsize handling of LIPS driver
- Fix minor bug in Japanese vertical font support

PR:             61249
Submitted by:   Ports Fury

Update port: print/ghostscript-gnu

        - Update EPLASER driver to version 3.1.1
        - Fix papersize handling of LIPS driver
        - Enable hl1240/hl1250 driver by default configuration

PR:             ports/57009
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

(forced commit)
Former my commit is violating the
committer's rule. Samsung-SmartGDI-all-GS.tar.gz
has subject to change and this file has no
version number...

This update dealt with the problem
that the printer does not accept compressed data bands bigger than
64 kB (gdevgdi-64k-bands-gtaylor.patch) is applied. So files not being
printed with the original driver will most probably be printed with
this version.

However, my falut commit was it has already changed by arved.

Pointed out by: kris
Pointy hat to:  myself

Backout my previous commit and reenable .SILENT instead.

Take measures to cope with too frequent update (without version numbering)
 of Samsung-SmartGDI driver

PR:             54708
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

ghostscriopt/Samsung-SmartGDI-all-GS.tar.gz has been changed,
so that md5 is also subjected to change.

Submitted by:   Krzysztof Stryjek <wtp@mud.pl>

Update distinfo.
  Result of diff 20030608 version and new version.
        Change some style (// to /* */, \x1b to \033, etc...)
        Overcome the problem that the printer does not accept
        compressed data bands bigger than 64 kB.

Pointed out by: horio shoichi <bugsgrief@bugsgrief.net>
                Adam <blueeskimo@gmx.net>
                Rob Lahaye <lahaye@snu.ac.kr>

o Update GDI driver
o Replace NPDL driver (currently unavailable at master site)
  with one included in LIPS driver

PR:             ports/54103
Submitted by:   Ports Fury

Update to version 7.07.

PR:             52480
Submitted by:   Ports Fury

Update to version 7.06.

PR:             51062
Submitted by:   Ports Fury

Eplaser update to 3.0.6.

PR:             ports-jp/13600
Submitted by:   Yoshihiko Sarumaru <mistral@imasy.or.jp>

Add another MD5 sum for ghostscript/eplaser-3.0.4-651.tgz
The new tarball has changes in the readme and a copy of the GPL.
Full diff of the tarballs is available at
http://people.freebsd.org/~arved/eplaser.diff

PR:     44996, 45043, 44780

Add back Gimp-Print (stp) driver support.

PR:             41800
Submitted by:   Ports Fury

Add BJC250 driver.

PR:             41738
Submitted by:   Ports Fury

- Spin off Gimp-Print driver.
- Update EPLASER driver to version 3.0.4.
- Update GDI driver.

PR:             41275
Submitted by:   Ports Fury

Spin off HPIJS driver

PR:             37890, 37891
Submitted by:   Ports Fury

upgrade to 7.05

PR:             37501
Submitted by:   Ports Fury

Update the checksum of one of ``gdevdj9.c.gz'' used by both ports.

PR:             ports/36752 ports/37164
Submitted by:   Shannon -jj Behrens, KATO Tsuguru

- Update DISTNAME/MASTER_SITE of samsung-gdi driver
- Add workaround for the problem that ps2epsi doesn't work

PR:             37285
Submitted by:   Ports Fury

(1) I forgot to update distinfo for gdevdj9.c.gz mentioned in original PR.
(2) $MASTER_SITES optimization may not work if $DISTFILES has comma
    separated keywords after ":" separator.

PR:             ports/36762 (2)
Reported by:    tkato (1), Lev A. Serebryakov <lev@serebryakov.spb.ru> (2)
Pointy hat to:  kuriyama

Upgrade to 6.53.

PR:             ports/36674
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Add checksum for latest HP DJ970C Series driver (I left the old   checksum in
place).  I don't have access to one of these printers   for testing, but the new
driver does at least compile.    

Upgrade HPIJS (HP inkjet) driver to 1.0.2, featuring the latest   disclaimer
technology (and allowing full-bleed printing on the   Photosmart 100), so
increment PORTREVISION.    

Update HPIJS package from 1.0 to 1.0.1.   HP fixed "off-by-one error" in the
HPIJS sources, that caused hpijs   to core dump at runtime, when being compiled
with -O or -O2.   I confirmed, that everything works perfectly again with -O and
-O2.   Bumped port revision, to flag this as an important change.   Thanks to
David Suffield from HP who took our (and others) reports   seriously, fixed the
bug and released the new HPIJS version.    

- Update Gimp-Print driver to version 4.2.0   - Update HPinkjet driver to
version 1.0   - Better support for jpeg WRKDIR location    

Update to 6.52    

Set DIST_SUBDIR=ghostscript, because this port requires lots of   distfiles with
random names.    

** ghostscript55 has been repocopied to ghostscript-gnu **    

Number of commits found: 34

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities