non port: print/p5-Net-CUPS/Makefile |
Number of commits found: 21 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 20 Jul 2022
|
14:22 Tobias C. Berner (tcberner)
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz>
* Anton Berezin <tobez@tobez.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Bruce M. Simpson <bms@FreeBSD.org>
* CHOI Junho <cjh@FreeBSD.org>
* Chuck Robey <chuckr@FreeBSD.org>
* D'Arcy Cain <darcy@druid.net>
* David O'Brien (obrien@NUXI.com)
* David O'Brien <obrien@FreeBSD.org>
* David O'Brien <obrien@cs.ucdavis.edu>
* Dima Dorfman <dima@unixfreak.org>
* Dmitry Kazarov <d.y.kazarov@mail.ru>
* Dmitry Sivachenko <dima@Chg.RU>
* Emanuel Haupt <ehaupt@FreeBSD.org>
* Fabiano Sidler <fabianosidler@swissonline.ch>
* Fernan Aguero <fernan.aguero@gmail.com>
* Fernan Aguero <fernan@iib.unsam.edu.ar>
* Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
* Golyashov Sergey <svvord@soft-wizard.ru>
* Gvozdikov Veniamin <g.veniamin@googlemail.com>
* Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
* Igor Pokrovsky <tiamat@comset.net>
* James Bailie <jimmy@mammothcheese.ca>
* Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
* Jean-Sebastien Roy <js@jeannot.org>
* Joe Marcus Clarke <marcus@FreeBSD.org>
* Joel Sutton <jsutton@bbcon.com.au>
* Joerg Wunsch <joerg@FreeBSD.org>
* Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
* Jose Jachuf <jjachuf@gmail.com>
* Joseph Koshy <jkoshy@FreeBSD.org>
* Juergen Lock <nox@jelal.kn-bremen.de>
* Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
* KANOU Hiroki <kanou@khdd.net>
* KATO Tsuguru <tkato@prontomail.com>
* Kapil Chowksey
* Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
* Kimura Fuyuki <fuyuki@hadaly.org>
* Klemm <andreas@klemm.gtn.com>
* Koop Mast <kwm@FreeBSD.org>
* Kozlov Sergey <kozlov.sergey.404@gmail.com>
* Lars Koeller
* Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
* Mark Pulford <mark@kyne.com.au>
* Mark Reidel <ports@mark.reidel.info>
* Martin Dieringer <martin.dieringer@gmx.de>
* Martin Kammerhofer
* Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
* Martin Ranne <gasp@ridcully.dnsalias.org>
* Matthew Hunt <mph@pobox.com>
* Maxim Loginov <Zeliboba@mail.ru>
* Michael Johnson <ahze@FreeBSD.org>
* Michael Moll <kvedulv at kvedulv.de>
* Michael Nottebrock <lofi@FreeBSD.org>
* Mike Meyer <mwm@mired.org>
* Mikhail Teterin
* Mita Yoshio <mita@FreeBSD.org>
* Nicola Vitale <nivit@email.it>
* Oliver Braun <obraun@informatik.unibw-muenchen.de>
* Oliver Breuninger <ob@seicom.NET>
* Olivier Cochard-Labbe <olivier@FreeBSD.org>
* Patrick Dung (patrick_dkt@yahoo.com.hk)
* Patrick Powell <papowell@astart.com>
* Pedro Giffuni
* Philip M. Gollucci <pgpollucci@p6m7g8.com>
* Piotr Kubaj <pkubaj@anongoth.pl>
* Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* Robert Withrow <witr@rwwa.com>
* Romain Tartiere <romain@FreeBSD.org>
* Satoshi Asami <asami@FreeBSD.org>
* Satoshi TAOKA <taoka@FreeBSD.org>
* Satoshi Taoka <taoka@FreeBSD.org>
* Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
* Simon 'corecode' Schubert <corecode@corecode.ath.cx>
* Simun Mikecin <numisemis@yahoo.com>
* Stefan Esser <se@FreeBSD.org>
* Stefan Hagen <ports@textmail.me>
* Stephen Fisher
* Steve Wills <swills@FreeBSD.org>
* Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* TAKATSU Tomonari <tota@FreeBSD.org>
* Thierry Thomas <thierry@pompo.net>
* Thomas Gellekum <tg@FreeBSD.org>
* Tim McCormick <tim@pcbsd.org>
* Tomokatsu SAITO <saito@a2z.co.jp>
* Veniamin Gvozdikov <vg@FreeBSD.org>
* Wen Heping <wenheping@gmail.com>
* Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
* amistry@am-productions.biz
* andrew@scoop.co.nz
* arved
* brett@peloton.physics.montana.edu
* chuckr@FreeBSD.org
* cjm2
* dbader@eece.unm.edu
* dgilbert@velocet.ca
* e-masson@kisoft-services.com
* eserte@cs.tu-berlin.de
* gahr
* giffunip
* hrs
* ijliao
* jmz
* joerg
* johans
* jseger@FreeBSD.org
* kline
* ljo
* lofi@FreeBSD.org
* martin.dieringer@gmx.de
* mwest@uct.ac.za
* oly@world.std.com
* patrick, trevor
* smace@FreeBSD.org
* spcoltri@unm.edu
* tg@FreeBSD.org
* tobez
* wenheping@gmail.com
With hat: portmgr
51879c9 |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Saturday, 24 Feb 2018
|
13:37 sunpoet
Update to 0.64
- Strip shared library
- Update pkg-descr
Changes: http://search.cpan.org/dist/Net-CUPS/Changes
|
Friday, 23 Feb 2018
|
19:25 sunpoet
Take maintainership
Approved by: vg (implicit)
|
Friday, 15 Sep 2017
|
08:58 mat
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight
|
Friday, 1 Apr 2016
|
14:16 mat
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Sunday, 27 Mar 2016
|
14:58 tijl
- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
|
Friday, 11 Mar 2016
|
11:53 tijl
Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3. Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.
Long description:
First some background. When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain. Costs used to be configured in such a way that files were
first converted to PostScript. This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers. Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.
Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format. It is
only used to implement filters and printer drivers and these only exist
in the context of a cups server so there's no need to separate this from
cups-base.
- cups-client provides a library that allows applications to print via cups.
It is possible to use the library to access a remote cups server without
running a local cups server, but such a setup is discouraged and the
configuration file to set this up has been marked deprecated. It is
better to run a local cups server and let that talk to the remote cups
server because then you have the benefits of local job queuing in case the
remote server is down or busy. Given this and the fact that without
filters cups-base is now smaller than it used to be it makes sense to
merge the ports. The patch also adds options IPPTOOL, DOCS and NLS which
when disabled make the new cups package smaller than the current
cups-client package. Merging the ports also prevents problems with
options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
There isn't really a need for such a metaport so cups-base can be renamed
to cups. The filters can be depended on by printer drivers such as hplip
if they need them.
Additional changes to the new print/cups:
- Clean up the patches. They seem to have been regenerated with post-patch
changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
other ports don't have to add links to it.
- Remove ulpt(4) helper scripts. The port uses libusb with ugen(4).
- Remove support for mDNSResponder. cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.
Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.
Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed. This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.
Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.
Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.
Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support. This is no longer supported
upstream.
- Stop installing hpcups PPDs. These are now automatically generated. The
bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
like avahi-daemon does. This fixes Zeroconf support for HP network
printers.
PR: 207746
Exp-run by: antoine
Approved by: portmgr (antoine)
|
Friday, 11 Dec 2015
|
10:03 sunpoet
- Add LICENSE
Approved by: portmgr (blanket)
|
Saturday, 7 Nov 2015
|
11:18 vg
- Remove broken
- Fix build
PR: ports/204052
Submitted by: Mathieu Simon <freebsd@simweb.ch>
|
Wednesday, 17 Jun 2015
|
17:15 antoine
Mark BROKEN: Fails to configure or build
=======================<phase: configure >============================
===> Configuring for p5-Net-CUPS-0.61_3
Net::CUPS Configuration
Running cups-config ... 2.0.3
The version of the Common Unix Printing System installed
on your system is too old for this module to work properly.
Please upgrade the version of CUPS on your system to version
1.2.2 or higher and re-run Makefile.PL to install this module.
Can't open Makefile: No such file or directory.
===========================================================================
=======================<phase: build >============================
===> Building for p5-Net-CUPS-0.61_3
make[1]: cannot open Makefile.
Reported by: pkg-fallout
|
Wednesday, 26 Nov 2014
|
13:08 mat
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.
As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.
The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.
The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.
PR: 194969
Differential Revision: https://reviews.freebsd.org/D1019
Exp-run by: antoine
Reviewed by: perl@
Approved by: portmgr
|
Wednesday, 10 Sep 2014
|
20:50 gerald
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
Sunday, 20 Apr 2014
|
20:02 antoine
Unbreak with new cups
PR: ports/188451
Obtained from: https://rt.cpan.org/Public/Bug/Display.html?id=78583
With hat: portmgr
|
Sunday, 5 Jan 2014
|
16:55 az
- state support
Approved by: portmgr (blanket infrastructure)
|
Friday, 20 Sep 2013
|
22:44 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
print)
|
Wednesday, 4 Sep 2013
|
13:07 az
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
Monday, 22 Jul 2013
|
14:34 vg
- Changed my email
- Trim Makefile headers and positions name and surname within
Approved by: eadler, rm (mentors)
|
Friday, 1 Jun 2012
|
05:26 dinoex
- update png to 1.5.10
|
Tuesday, 13 Sep 2011
|
08:37 sunpoet
- Add p5-Net-CUPS 0.61
Previous versions of this module attempted to provide a Perl interface
layer similar to the C interface of CUPS. This was fine for power users,
but most people were not looking for this type of interface.
This module has now been converted to use an object oriented paradigm
to facilitate quicker development and ease of use.
WWW: http://search.cpan.org/dist/Net-CUPS/
PR: ports/160644
Submitted by: Veniamin Gvozdikov <g.veniamin@googlemail.com>
|
Number of commits found: 21 |