19:54 antoine 

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

 

11:36 kai 

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version
  requirements of Pillow for www/py-wagtail.

Release Notes:

* https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (7.0.0):

*
https://pillow.readthedocs.io/en/latest/releasenotes/7.0.0.html#backwards-incompatible-changes

Detailed Changelog:

* https://github.com/python-pillow/Pillow/blob/7.0.0/CHANGES.rst

PR:		243665
Submitted by:	sunpoet (patch for 7.0.0 and repo-copied version)
Reviewed by:	koobs [1], sunpoet
Approved by:	koobs (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23713

 

15:25 antoine 

Deprecate a few ports

With hat:	portmgr

 

19:39 bofh 

print/py-trml2pdf: Change RUN_DEPENDS to print/py-reportlab

- Add LICENSE LGPL21

PR:		237081
Approved by:	ports@caomhin.org

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

10:44 danfe 

- Unmute installation command and wrap exceedingly long line
- Remove useless WWW line that points to a non-existent site

NB: port serves version 1.2 off some not-quite-related SF project that
was last updated on 2009-01-20; https://pypi.python.org/pypi/trml2pdf
offers version 0.4.2 updated on 2016-10-24.

 

11:04 mat 

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

21:09 amdmi3 

- Fix shebangs
- Add NO_ARCH

Approved by:	portmgr blanket
MFH:		2015Q2

 

06:59 antoine 

Unbreak py-satchmo, it depended on both py-imaging (self+via py-sorl-thumbnail)
and py-pillow (via py-trml2pdf)

 

21:43 adamw 

Convert some more USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

 

08:57 olgeni 

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories P-S.

CR:		D422
Approved by:	portmgr (bapt)

 

03:00 adamw 

Add DOCS option for ports with PORTDOCS in plist.

 

02:40 miwi 

- Stage support

 

12:44 tota 

- Repocopy print/py-reportlab to print/py-reportlab1
  to preserve version 1.x and to update to 3.0

  print/py-reportlab:
    - Update print/py-reportlab to 3.0 based on print/py-reportlab2
    - Support STAGEDIR
    - Use PYDISTUTILS_AUTOPLIST
      * Remove pkg-plist, accordingly
    - Set CONFLICTS
    - Add PORTSCOUT
    - Replace tab with a single space after WWW: in pkg-descr

  print/py-reportlab1:
    - Support STAGEDIR
    - Add PKGNAMESUFFIX not to duplicate ports with the same name
    - Set CONFLICTS
    - Use PYDISTUTILS_AUTOPLIST
      * Remove pkg-plist, accordingly
    - Make use of PORTDOCS
    - Set OPTIONS_DEFINE explicitly
    - Fix include statement
    - Make docs unconditional to stage
    - Replace tab with a single space after WWW: in pkg-descr

  print/py-reportlab2:
    - Update CONFLICTS
    - Set PORTSCOUT

  dependent ports:
    - Switch dependency from print/py-reportlab to print/py-reportlab1
      * biology/py-biopython
      * deskutils/gourmet
      * deskutils/griffith
      * games/pythonsudoku
      * misc/pdfmap
      * print/py-trml2pdf
      * www/py-satchmo

PR:		ports/186970
Submitted by:	tota (myself)
Approved by:	Muhammad Moinur Rahman (maintainer)

 

22:44 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

 

11:46 dinoex 

- update to jpeg-8

14:28 miwi 

Tiny RML2PDF is a component of the Open Report project. It can be used with the
Tiny Reporting Server to have a complete solution to render PDF file on the
fly.

WWW:    http://tiny.be

PR:             ports/140781
Submitted by:   Kevin Golding <ports at caomhin.org>