transfig 3.2.5d print =37

Tools to convert Xfig's .fig files

There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
Port Added: unknown
License: not specified in port

---

---

TransFig is a set of tools for creating TeX documents with graphics
which are portable, in the sense that they can be printed in a wide
variety of environments. 

Drivers currently exist for the following graphics langauges:
AutoCad slide, BOX, (E)EPIC macros, LaTeX picture environment,
PIC, PiCTeX, PNG, PostScript, Encapsulated Postscript, GIF,
IBM-GL, JPEG, PCX, MF (METAFONT), TeXtyl, TIFF, TPIC, XBM (X11
Bitmap), XPM (X11 Pixmap), and TK (tcl/tk).  Fig2dev can be
configured with a subset of these drivers.

CVSWeb : Sources : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: devel/imake, x11/libXpm
Required To Run: graphics/netpbm, x11/libXpm, print/ghostscript9
Required Libraries: graphics/png

Required by:
for Run

math/bargraph

---

To install the port: cd /usr/ports/print/transfig/ && make install clean
To add the package: pkg_add -r transfig

---

Configuration Options

     No options to configure

---

Master Sites:

http://heanet.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://sunet.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://iweb.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://switch.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://surfnet.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://kent.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://freefr.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://voxel.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://jaist.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://osdn.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://nchc.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://ncu.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://transact.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://softlayer.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://internode.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://ufpr.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

http://waix.dl.sourceforge.net/project/mcj/mcj_dist_src/3.0/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

. Update to 3.2.5d.
. Fix MASTER_SITES to make it fetchable.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Remove unneeded -lcompat.

It seems this port doesn't depend on any of the symbols provided by
libcompat, so we'd better just remove it.

Approved by:    miwi

- update to jpeg-8

Remove WITH_GHOSTSCRIPT_GNU check.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

- Update to 3.2.5

PR:             111246
Submitted by:   Eric P. Scott <eps+pbug0704@ana.com>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

SIZEify.

Use the new ghostscript options.

Submitted by:   linimon

Remove a quite unnecessary #include <varargs.h> which tripped up the build.

KATO mega patch

- ECHO -> ECHO_MSG

For some ports:
- pre-fetch -> pre-everything
- ECHO -> ECHO_CMD

PR:             ports/56820-56858
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

[PATCH] print/transfig: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

PR:             ports/54950
Submitted by:   Jens Rehsack <rehsack@liwing.de>

Unsplit multi-line string literals.

transfig run-depends on ghostscript.

Remove chuckr as maintainer of his ports.  He has not committed since
09/2000 and has been unresponsive to mail about his ports for at least
2 years.

Approved by:    portmgr

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Upgrade to 3.2.4, with a minor addition to the patch in the PR.

PR:             ports/46948 ports/38324
Submitted by:   KATO Tsuguru
Approved by:    chuckr (maintainer -- by phone)

Fix build on -CURRENT.

PR:             41006
Submitted by:   Maxim Maximov <mcsi@localhost.my.domain.agava.ru>
Approved by:    maintainer timeout

* This fixes the problem where fig2dev uses the "transparentimage" code      for
JPEG images, which is only supposed to be used for GIF.    

Bump png major    

Update to version 3.2.3d    

Update to version 3.2.3c.    

Convert category print to new layout.  

(1) Add new variable, XFREE86_VERSION, to specify which version of       XFree86
(3 or 4) to depend to when USE_XLIB is set.       XFREE86_VERSION defaults to 3
for now, but adventurous users can       override it in /etc/make.conf.  When
XFREE86_VERSION=3, USE_XLIB       will add a dependency to x11/XFree86; when it
is set to 4, the       dependency will be to x11/XFree86-4-libraries.  When     
 XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS       hacks
to avoid messing with XFree86 are turned off.    

- a patch added: changes default Korean PS font.  

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities