notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

FInally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combinatio for a given watch list. This is what FreshPorts will look for.

non port: science/elmergrid/Makefile

Number of commits found: 23

Tuesday, 7 Oct 2014
19:35 thierry search for other commits by this committer
Mark the old elmer-* ports as deprecated: they are obsoleted by
cad/elmerfem.

Reported by:	pfg
Original commitRevision:370390 
Thursday, 17 Jul 2014
08:57 olgeni search for other commits by this committer
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories P-S.

CR:		D422
Approved by:	portmgr (bapt)
Original commitRevision:362126 
Wednesday, 11 Jun 2014
18:55 marino search for other commits by this committer
Reset the 99 ports still listed under sylvio@

Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy.  Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.

Approved by:	portmgr (implicit)
Original commitRevision:357526 
Wednesday, 25 Sep 2013
00:54 bdrewery search for other commits by this committer
- Remove NO_STAGE as these have been tested to be safe

With hat:	portmgr
Original commitRevision:328226 
Friday, 20 Sep 2013
22:48 bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
science)
Original commitRevision:327767 
Friday, 27 Nov 2009
22:52 sylvio search for other commits by this committer
- Update my mail address to FreeBSD

Approved by:    miwi (mentor)
Original commit
Saturday, 22 Aug 2009
01:11 amdmi3 search for other commits by this committer
- Fix fetch by using garr SF mirror which still has the distfiles
Original commit
00:35 amdmi3 search for other commits by this committer
- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S
Original commit
Friday, 10 Jul 2009
00:48 araujo search for other commits by this committer
- Pass maintainer to Sylvio Cesar <scjamorim at bsd.com.br>.
Original commit
Thursday, 21 Aug 2008
06:18 rafan search for other commits by this committer
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)
Original commit
Friday, 14 Mar 2008
11:04 araujo search for other commits by this committer
- Update MASTER_SITES.
- Project was migrated for SF.
- Files as repacked.
- BUMP PORTREVISION.

Reported by:    Pedro <pfgshield-freebsd@yahoo.com>
Original commit
Wednesday, 19 Sep 2007
18:22 araujo search for other commits by this committer
- Update to 5.4.0.

Approved by:    stas (mentor)
Original commit
Friday, 29 Jun 2007
16:29 araujo search for other commits by this committer
- Change my mail address to araujo@.

Approved by:    stas (mentor)
Original commit
Thursday, 19 Apr 2007
15:06 miwi search for other commits by this committer
- Update to 5.3.3

PR:             111881
Submitted by:   miwi
Approved by:    maintainer
Original commit
Wednesday, 14 Feb 2007
20:30 miwi search for other commits by this committer
- Update to 5.3.2

PR:             109027
Submitted by:   Marcelo Araujo <araujo@bsdmail.org> (maintainer)
Original commit
Saturday, 27 Jan 2007
11:45 itetcu search for other commits by this committer
update to 5.3.0

PR:             ports/108287
Submitted by:   Marcelo Araujo (maintainer)
Original commit
Wednesday, 24 Jan 2007
00:02 pav search for other commits by this committer
- Fix fetch
Original commit
Sunday, 21 Jan 2007
05:45 itetcu search for other commits by this committer
- update version to 5.2.3
- fix MASTER_SITE (subdir)
- pass maintainership to submitter

PR:             ports/108159
Submitted by:   Marcelo Araujo
Original commit
Friday, 12 Jan 2007
07:10 maho search for other commits by this committer
Remove gfortran dependency. it is not used actually.
Original commit
Wednesday, 10 Jan 2007
13:36 maho search for other commits by this committer
* change to USE_GCC=4.2+
* bump port revision
Original commit
Wednesday, 12 Jul 2006
21:58 thierry search for other commits by this committer
- Upgrade to 5.2.0;

- Add links under $PREFIX/bin.
Original commit
Saturday, 1 Jul 2006
12:16 thierry search for other commits by this committer
Reset maintainership: Pedro's dev machine has been stolen :-(

Hoping to see you back soon!

Submitted by:   Pedro F. Giffuni <giffunip (at) asme.org> (maintainer)
Original commit
Monday, 24 Apr 2006
19:48 thierry search for other commits by this committer
ElmerGrid is a utility program for fast creation of structured 2D and
extruded and rotated 3D geometries. ElmerGrid is independent but fully
supports ElmerSolver and ElmerPost. It may be used to create linear,
quadratic and cubic triangles and rectangles. It has also versatile
capabilities in mesh manipulation.

ElmerGrid may also be used in grid manipulation. ElmerGrid may, for
example, be used to transfer different mesh formats to that understood by
ElmerSolver or ElmerPost. ElmerGrid also includes mesh partitioning
routines that have been optimized for ElmerSolver. The partitioning may be
done by METIS or by a simple geometric division.

Submitted by:   Pedro F. Giffuni <giffunip@asme.org>
Original commit

Number of commits found: 23