19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

22:44 Wen Heping (wen) 

science/py-obspy: Update to 1.4.0

Update DEPENDS

    73fa7ff

15:29 Wen Heping (wen) 

science/py-obspy: Update to 1.3.1

    5b40ff6

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

science: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Andreas Fehlner <fehlner@gmx.de>
  *  Brad Huntting <huntting@glarp.com>
  *  Chao Shin <quakelee@cn.FreeBSD.org>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chia-Hsing Yu <me@davidyu.org>
  *  Chris Rees <utisoft@gmail.com>
  *  David Naylor <dbn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Ed Schouten <ed@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik B Knudsen
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frederic Culot <frederic@culot.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Glenn Johnson
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Igor Serikov <iserikov@acm.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Klaus Aehlig <aehlig@linta.de>
  *  Kurt Kanzenbach <kurt@kmk-computers.de>
  *  Leland Wang <llwang@infor.org>
  *  Li-Lun Wang <llwang@infor.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <chat95@mbox.kyoto-inet.or.jp>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pav Lucistnik <pav@oook.cz>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@tutopia.com>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Ryo MIYAMOTO <rmiya@cc.hirosaki-u.ac.jp>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Shin'ya Murakami <murakami@ahs.scitec.kobe-u.ac.jp>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Shin-ya Murakami <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Steve Wills <steve@mouf.net
  *  Steve Wills <steve@mouf.net>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAOKA Fumiyoshi
  *  Thierry Thomas <thierry@pompo.net>
  *  Tim Cas <ports@stdrand.com>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  anholt@FreeBSD.org
  *  bacon@smithers.neuro.mcw.edu
  *  batman <batman@udel.edu>
  *  db
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  jbacon
  *  maintainer.freebsd@xpoundit.com
  *  mi
  *  rafan@infor.org
  *  shurd@FreeBSD.org
  *  thierry@pompo.net
  *  will

With hat:	portmgr

    4619604

04:14 Wen Heping (wen) 

science/py-obspy: Update to 1.3.0

Update DEPENDS

    dae15bb

20:13 Thierry Thomas (thierry) 

math/py-matplotlib: chase minimum Python version in dependent ports

Since the previous update changed USES=python from 3.6+ to 3.7+, all
dependent ports must have USES=python:3.7+ as well, otherwise it breaks
the @py36 flavor.

PR:		255347
Reported by:	sunpoet

    1d44af5

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

14:15 antoine 

Unbreak bulk -a

 

11:50 wen 

- Update to 1.2.2

 

03:58 wen 

- Update to 1.2.1
- Remove DEPRECATED, now build with python3
- Update DEPENDS

 

15:25 antoine 

Deprecate a few ports

With hat:	portmgr

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

13:16 gerald 

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

 

07:18 wen 

- Update to 1.1.1

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

06:11 wen 

- Update to 1.1.0

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

23:38 wen 

- Update to 1.0.3

 

02:28 wen 

- Update sqlalchemy dependency

PR:		215221
Submitted by:	rene@

 

13:24 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

 

09:29 wen 

- Update to 1.0.2

 

10:52 matthew 

Reorganise and modernise the py-sqlalchemy ports.

 - Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches.
 - Deprecate the ports for the 0.6 and 0.7 release branches, as these
   have been declared EoL and are no longer supported by upstream.
 - Update to the latest available version in each branch.

In detail:

   Port                 Version Maintainer
   ----------------------------------------------
   py-sqlalchemy06      0.6.9   nivit@FreeBSD.org (Deprecate 2016-08-20) [1]
   py-sqlalchemy07      0.7.10  nivit@FreeBSD.org (renamed py-sqlalchemy,
Deprecate 2016-08-20) [1]
   py-sqlalchemy08      0.8.7   nivit@FreeBSD.org (renamed py-sqlalchemy-devel)
[1]
   py-sqlalchemy09      0.9.10  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]
   py-sqlalchemy10      1.0.13  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]

 - Use options-helpers and option dependent make targets.
 - Use autoplist for documents as well as python code
 - Add all the docments to the packages: previously an arbitrary
   subset was added in a way that excluded CSS, images and other HTML
   assets.
 - Use TEST_DEPENDS and add a TEST_TARGET instead of having a 'TEST'
   option.
 - Use py-pytest for 0.9.x and later, rather than py-nose.
 - Add CONFLICTS_INSTALL between all of the py-sqlalchemyXY ports.

PR:		191442
Submitted by:	robak
Reviewed by:	robak
Reviewed by:	pi
Approved by:	nivit (maintainer timeout, ~300days) [1]
Approved by:    m.tsatsenko@gmail.com (maintainer) [2]
Sponsored by:	https://reviews.freebsd.org/D908

 

14:25 mat 

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

 

10:54 wen 

- Update to 1.0.1

 

09:27 wen 

- Update to 1.0.0

 

07:02 wen 

- Update to 0.10.2

 

21:10 amdmi3 

- Fix shebangs

Approved by:	portmgr blanket
MFH:		2015Q2

 

15:14 wen 

- Update to 0.10.1

 

15:23 demon 

Fix compilation after recent numpy patch.

Patch by thierry@FreeBSD.org, pointed out by antoine.

 

02:45 wen 

- Fix build

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

08:23 mva 

- Remove easy_install dependency
- Bump PORTREVISION to enforce a cleanup for the easy_install references

With hat:	python@
Approved by:	portmgr (implicit)

 

13:19 wen 

- Update to 0.9.2
- Stage support
- Add LICENSE
- Convert to PYDISTUTILS_AUTOPLIST

PR:		189369
Submitted by:	Muhammad Moinur Rahman <5u623l20@gmail.com>

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

17:01 bapt 

Convert s* to USES=zip

 

17:15 tijl 

Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes".  In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

22:48 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
science)

 

23:56 wen 

- Update COMMENT and pkg-descr
- Add missing DEPENDS

Reported by:	Tobias Megies <megies@geophysik.uni-muenchen.de>

 

15:14 wen 

- Update to 0.8.4

 

14:05 wen 

- Update to 0.8.3