FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Search FreshPorts using Google
not searching src

The FreshPorts Search


Include deleted ports Case sensitive search Sort by:
Include /src tree

Notes

  • Case sensitivity is ignored for "sounds like" and output is ordered by the soundex.
  • When searching on 'Message ID', the type of match is ignored.
  • When searching on 'Commit Message' only 'containing' is used.
  • When searching by 'Under a pathname', your path must start with something like /ports/, /doc/, or /src/. All commits under that point will be returned. The selected match type is ignored and defaults to 'Starts with'.
Number of commits: 395 (showing only 100 on this page) 1 | 2 | 3 | 4  »  
Wed, 8 Jun 2016
[ 13:38 db ] Original commit 
qsstv 9.1.5 comms files touched by this commit Amateur Radio SSTV/FAX reception program for unix
comms/qsstv uses the substitution %%QT_LIBDIR%% [=relative path
to Qt libraries] by mistake [that's devel/qca/pkg-plist.qt5].
The attached patch replaces this everywhere by "lib".

Well. This was rather bogus.
-%%PORTDOCS%%%%DOCSDIR%%/manual/ca%%QT_LIBDIR%%ration.png
+%%PORTDOCS%%%%DOCSDIR%%/manual/calibration.png

PR:		ports/210112
Submitted by:	tcberner@gmail.com
Fri, 3 Jun 2016
[ 20:10 db ] Original commit 
sdr-wspr 0.1.0 comms files touched by this commit WSPR receiver/decoder using libsdr
Cleanup a bit by passing necessary CMAKE_INSTALL_RPATH in Makefile
Sat, 28 May 2016
[ 15:30 db ] Original commit 
svxlink 15.11 comms files touched by this commit General purpose ham radio voice services
Summary: comms/svxlink: Fix build with libc++ 3.8.0

During the exp-run in bug 208158, it was found that comms/svxlink gives errors
with libc++ 3.8.0 [1]:

/wrkdirs/usr/ports/comms/svxlink/work/svxlink-15.11/src/async/audio/AsyncAudioDe
+viceAlsa.cpp:551:7:
error: call to 'abs' is ambiguous
  if (::abs(real_rate - sample_rate) > 100)
      ^~~~~

This is because abs() is being called with an unsigned argument.  Fix this by
casting 'real_rate' to int, since it was assigned from 'sample_rate' anyhow.

PR:		ports/209371
Reported by:	@dim
Sat, 30 Apr 2016
[ 00:26 db ] Original commit 
yaac 1.0b89 comms files touched by this commit Platform-independent Java application for the APRS network
Fix incorrect comment and while here add LICENSE
Mon, 25 Apr 2016
[ 19:45 db ] Original commit 
libfec 3.0.1_2 comms files touched by this commit Several forward error correction (FEC) decoders
Add back libfec
Remove support for obsolete FreeBSD versions
Reassign maintainer to hamradio@
Cleanups to make sure it compiles cleanly on clang and gcc
Cleanup to (hopefully) allow building on non x86 architectures (untested)
Fri, 8 Apr 2016
[ 00:08 db ] Original commit 
wsjtx 1.6.0 comms files touched by this commit Weak signal ham radio communication package
Fix so it does not core on 10.x (shurd@)
Add missing dependancy so it builds man pages and user manual (db@)
Since they are using Sourceforge, clean up distfiles (db@)

No binary changes.

Reviewed by:	shurd,db
Sun, 3 Apr 2016
[ 20:23 db ] Original commit 
wsjtx 1.6.0 comms files touched by this commit Weak signal ham radio communication package
Upgrade to wsjtx 1.6.0

For quick reference, here's a short list of features and capabilities added
to WSJT-X since Version 1.5.0:

WSPR mode, including coordinated automatic band-hopping and a new
two-pass decoder that can decode overlapping signals.

EME-motivated features including JT4 (submodes A-G), Echo mode, and
automatic Doppler tracking. The JT4 decoder is more sensitive than
that in the latest WSJT, and message averaging is fully automated.
(Note that submodes JT65B and JT65C are also present in Version 1.6,
but the high-sensitivity decoder required for EME with JT65
is not yet included.)
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 31 Mar 2016
[ 02:27 db ] Original commit 
sdr-wspr 0.1.0 comms files touched by this commit WSPR receiver/decoder using libsdr
Missed a webkit in USE_QT5 mea culpa

Reviewed by:	jeff@baitis.net
Approved by:	jeff@baitis.net
Fri, 25 Mar 2016
[ 14:35 db ] Original commit 
wsjt 10.r5745 comms files touched by this commit Weak signal ham radio communication package
"can't find the Python and f2py and fail to build"
Patch provided hard codes the full python path to use.

PR:		ports/208274
Submitted by:	takefu@airport.fm
[ 02:50 db ] Original commit 
cqrlog 1.9.1 comms files touched by this commit Amateur Radio logging application
Ok, really fix cqrlog. Add missing fpc units.
Wed, 23 Mar 2016
[ 22:39 db ] Original commit 
usrp 3.4.3_4 comms files touched by this commit Ettus Research USRP driver framework
Mark as BROKEN ON I386 with CURRENT for now.
There is a later version of the USRP code available. Time and effort
is better spent on that.
[ 14:38 db ] Original commit 
cqrlog 1.9.1 comms files touched by this commit Amateur Radio logging application
Changed lazbuild to lazarus in BUILD_DEPENDS to fix build as user.
No other changes.

Submitted by:		pkg-fallout@
Sat, 19 Mar 2016
[ 19:53 db ] Original commit 
sdr-wspr 0.1.0 comms files touched by this commit WSPR receiver/decoder using libsdr
A WSPR receiver/decoder using libsdr. This implementation embeds the original
WSPR Fortran code into a libsdr processing node, allowing to assemble a WSPR
receiver for various sources easily.

WWW: https://github.com/hmatuschek/sdr-wspr

PR:		207381
Submitted by:	Jeffrey Baitis <jeff@baitis.net>
Fri, 18 Mar 2016
[ 22:42 db ] Original commit 
libsdr 0.1.0 comms files touched by this commit Simple software defined radio (SDR) library
libsdr-gui 0.1.0 comms files touched by this commit GUI functions (e.g. waterfall) for libsdr library
As Jeff's baitisj@pcbsd.org keeps bouncing, replace with a working email

Approved by:	baitisj@pcbsd.org via email
Tue, 1 Mar 2016
[ 03:42 db ] Original commit 
libsdr-gui 0.1.0 comms files touched by this commit GUI functions (e.g. waterfall) for libsdr library
GUI functions (e.g. waterfall) for libsdr, a simple software defined radio
(SDR) library.

WWW: https://github.com/hmatuschek/libsdr-gui

PR:		207380
Submitted by:	Jeffrey Baitis <baitisj@pcbsd.org>
[ 03:41 db ] Original commit 
libsdr 0.1.0 comms files touched by this commit Simple software defined radio (SDR) library
A simple software defined radio (SDR) library.
Although being simple, libsdr is sufficient to write a simple SDR receiver
application (github.com/hmatuschek/sdr-rx, above). This RX application
supports several input sources (i.e. sound card, files, RTL2382 dongles etc.)
and modes (i.e. AM, FM, SSB, CW, etc.).

WWW: https://github.com/hmatuschek/libsdr

PR:		207379
Submitted by:	Jeffrey Baitis <baitisj@pcbsd.org>
Fri, 26 Feb 2016
[ 02:40 db ] Original commit 
dream 2.1.1 audio files touched by this commit Software radio for AM and Digital Radio Mondiale (DRM)
- Fix build on 10.x
Tue, 23 Feb 2016
[ 18:39 db ] Original commit 
soundmodem 0.20 comms files touched by this commit Amateur Radio sound modem
oops I didn't. I did. I forgot to add some patches.
I'll just go sit in the corner with the pointy hat then.
Sat, 20 Feb 2016
[ 17:21 db ] Original commit 
soundmodem 0.20 comms files touched by this commit Amateur Radio sound modem
Update to 0.20
Clean up submitted patch to work with system clang compiler
Change to new upstream repository

PR:		ports/206705
Submitted by:	takefu@airport.fm
Wed, 17 Feb 2016
[ 23:06 db ] Original commit 
dream 2.1.1 audio files touched by this commit Software radio for AM and Digital Radio Mondiale (DRM)
Open-Source Software Implementation of a DRM (Digital Radio Mondiale) Receiver
under the GNU General Public License (GPL)

There was a previous dream port that had been removed. It was
audio/dream||2009-01-06|Has expired: Needs DRM enabled in FAAD

The Dream development team today releases Dream version 1.12.

Dream is a DRM (Digital Radio Mondiale) software receiver and decoder.
It is a very complete receiver, featuring compliant decoding of HE AAC v2
audio streams, journaline decoding, a feature rich statistics section
providing invaluable information about the streams being received, and automatic
update of available stations from the web, among several other features.

It also features a limited transmission mode, that uses the FAAC AAC encoder.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 15 Jan 2016
[ 14:10 db ] Original commit 
libfap 1.5 comms files touched by this commit C port for Ham::APRS::FAP Finnish APRS Parser Perl module
Add libfap 1.5, c port for Ham::APRS::FAP Finnish APRS Parser Perl
module.

PR:		ports/206159
Submitted by:	akh@nobugware.com
Thu, 24 Dec 2015
[ 14:31 db ] Original commit 
wsjtx 1.5_1 comms files touched by this commit Weak signal ham radio communication package
In some cases c11 libs are needed as well to run.
Thu, 26 Nov 2015
[ 04:10 db ] Original commit 
wsjtx 1.5 comms files touched by this commit Weak signal ham radio communication package
Clean up port to use pkgconfig
No change to actual port produced binaries results.
Wed, 25 Nov 2015
[ 20:41 db ] Original commit 
wsjtx 1.5 comms files touched by this commit Weak signal ham radio communication package
WSJTX ("Weak Signal Communication, by K1JT") offers specific digital protocols
optimized for meteor scatter, ionospheric scatter, and EME (moonbounce)
at VHF/UHF, as well as HF skywave propagation.  The program can decode
fraction-of-a-second signals reflected from ionized meteor trails and
steady signals 10 dB below the audible threshold.

This version is a non python Qt app.
Sat, 10 Oct 2015
[ 19:15 db ] Original commit 
unixcw 3.5.0 comms files touched by this commit Libs for cw on unix
xcwcp 3.5.0 comms files touched by this commit X11 CW Tutor using unixcw
Update to 3.5.0

2015-09-29 Kamil Ignacak
        * bugfix: fixing code that resets tone queue on flushing.  A bug
        was found on FreeBSD: after pressing Ctrl+C, application that
        wanted to stop and delete generator as part of SIGINT handling
        procedure, got stuck in cw_tq_flush_internal() function, waiting
        for tone queue to go idle. This never happened. Resetting all tone
        queue state variables in flush function ensures that the function
        completes and returns, and that client application can exit.

2015-09-12 Kamil Ignacak
        * xcwcp: the application souce code files are now ported to
        Qt5. Build system files have been modified to use Qt5 to build
        xcwcp.
        Discovery and adding -fPIC to compiler flags for xcwcp is right
        now very naive, perhaps that will have to be improved in the
        future.
Sun, 4 Oct 2015
[ 02:26 db ] Original commit 
gnuradio 3.7.8 comms files touched by this commit Amateur Radio Software defined radio
Update to 3.7.8
USE_GCC=yes causes the build to fail on systems where clang and libc++ are
used by default (see bug 202143, for example). This essentially means
comms/gnuradio currently only builds on 9.x. The problem is caused by the
fact that on 10.x and later boost is likely built using clang and libc++,
but USE_GCC=yes forces gnuradio to be built with GCC and libstdc++. Ports
r392951 mentioned USE_GCC=yes was added because "clang's builtins were
conflicting with gnuradio", which does not seem to happen in my tests at least.

PR:		ports/203500
Submitted by:	takefu@airport.fm
Sat, 3 Oct 2015
[ 16:30 db ] Original commit 
hamlib 3.0_1 comms files touched by this commit Shared libraries for Amateur Radio Equipment Control Applications
Fix goof with missed plist entries
Strip libraries
Move hamlib.info from plist into Makefile using INFO
[ 00:47 db ] Original commit 
fldigi 3.23.03 comms files touched by this commit Digital decoder for psk, cw, psk31, olivia
Upgrade fldigi

=Version 3.23.03=

FSQ and fixes for FSQ bugs.
Various fixes for Olivia/Contestia, macro bug, WEFAX hang on INFO
Added ifkp modem
Fri, 2 Oct 2015
[ 13:39 db ] Original commit 
hamlib 3.0 comms files touched by this commit Shared libraries for Amateur Radio Equipment Control Applications
The Hamlib Group is pleased to announce the release of Hamlib 3.0.

This release of Hamlib introduces a change to the version scheme.
Essentially, the leading '1.' characters have been dropped so '3.0' is a
direct follow on from the '1.2.' releases and has been configured to be
ABI compatible with the '1.2.' releases.

Bug fixes to this release will start with '3.0.1' through '3.0.n'.

The next releases will be '3.1' through '3.n' until the next major
release.
Files are hosted at the Hamlib prjoect page at SourceForge.net:

https://sourceforge.net/projects/hamlib/files/hamlib/3.0/
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 10 Sep 2015
[ 13:51 db ] Original commit 
wsjt 10.r5745 comms files touched by this commit Weak signal ham radio communication package
Clean up wsjt build and update to reflect latest version
Upstream version is now 10
Fix dependency to reflect new naming of tkinter under python3
Fix dependency for kvasd as it is installed in LOCALBASE not LINUXBASE
Wed, 19 Aug 2015
[ 23:08 db ] Original commit 
wsjt 9.1.r5745_12 comms files touched by this commit Weak signal ham radio communication package
Remove debugging echo
Actually use correct dependancy for kvasd
[ 01:00 db ] Original commit 
cwtext 0.96 textproc files touched by this commit Morse Code Generator
Reassign to hamradio@
Clean up Makefile
No binary changes
[ 00:04 db ] Original commit 
cwirc 2.0.0_5 irc files touched by this commit X-Chat Morse plugin
Accidentally commented out a line during debug
Tue, 18 Aug 2015
[ 23:05 db ] Original commit 
cwirc 2.0.0_5 irc files touched by this commit X-Chat Morse plugin
Reassign ownership to hamradio@
Clean up portlint -C warnings do not mute install
Clean up QA reported error in staging
Correct upstream website in Makefile fetch and pkg-descr
No binary changes
[ 20:37 db ] Original commit 
gsmc 1.1_4 science files touched by this commit Smith chart program for impedance matching
Reassign to hamradio@
Add LICENSE
Remove pkg-plist replace with PLIST_FILES
No actual binary changes
Mon, 17 Aug 2015
[ 14:46 db ] Original commit 
wsjt 9.1.r5745_12 comms files touched by this commit Weak signal ham radio communication package
Unbreak wsjt
Current head python code uses python3 so update to reflect that
both wsjt and the upcoming wsjtx port rely upon Linux binary kvasd
Wed, 12 Aug 2015
[ 20:10 db ] Original commit 
kvasd 1.0 comms files touched by this commit Helper program for wsjt and wsjtx
kvasd is a binary Linux common driver program used by wsjt and wsjtx
Mon, 27 Jul 2015
[ 16:37 db ] Original commit 
wspr 4.00.r4198_5 comms files touched by this commit Weak signal for HF ham radio communication package
Unbreak build
Portaudio cleanups
remove obsolete USE_AUTOTOOLS=  autoconf
Sun, 26 Jul 2015
[ 23:00 db ] Original commit 
gnuradio 3.7.7.1 comms files touched by this commit Amateur Radio Software defined radio
- Update to later version of gnuradio
- fix build with portaudio
- clang builtin's are conflicting with gnuradio so use USE_GCC for now
Mon, 11 May 2015
[ 11:57 db ] Original commit 
fldigi 3.22.08_1 comms files touched by this commit Digital decoder for psk, cw, psk31, olivia
Get portaudio2 dependencies right since libs are not in ${LOCALBASE}/lib
Clean up LOCAL slightly
Sun, 10 May 2015
[ 03:16 db ] Original commit 
tlf 1.2.1 comms files touched by this commit Amateur Radio curses based logging program
Update to 1.2.1

PR:		ports/200043
Submitted by:	takefu@airport.fm
Fri, 1 May 2015
[ 16:25 db ] Original commit 
linrad 4.02_2 comms files touched by this commit Amateur Radio DSP utility (SDR)
Fix linrad on latest gcc

I checked linrad upstream, and they still haven't fixed these two bugs.  I am
surprised they haven't been reported yet.  Without these fixes, linrad cannot be
built with gcc5.

the menu.c patch simply reverses the order of the condition.  One must check the
bounds constraint first!  It's a pretty dumb mistake but I've seen this kind
before.

The second one fails because -Werror is set.  This took me a while because I
couldn't figure out the relationship between ADCHANS and rxchan.  In any case,
setting 4 locations per channel did indeed allow the array to be big enough. 
(at first I thought the loop was running too high, but I finally determined the
array was too small).

These were found on DragonFly that uses gcc5.

This patch has not been tested on FreeBSD but I can't how it could possibly
fail.

It would be good if the ham@ maintainer reports the issue upstream.

Updated patch files using make makepatch

PR:			ports/199737
Submitted by:		marino
Wed, 29 Apr 2015
[ 16:50 db ] Original commit 
quisk 3.6.21 comms files touched by this commit Software Defined Radio (SDR)
Quisk Version 3.6.21 March 2015
===============================
Quisk can now transmit a message from a WAV file.  Record your message at
a high level (near clipping) at 48 ksps, 16-bit, one channel (monophonic).
Then enter the file name on the Config/Config screen.  Press the "File play"
button to transmit.  Quisk will press the PTT button for you, and release it
during pauses.  To interrupt playback, press PTT or release FilePlay so you can
answer.

The "Split" button has been replaced with a "Splt" button and a "Rev" button. 
The "Splt"
button splits Rx and Tx; and if you click it with the right mouse button instead
of the
left, it also locks the Tx frequency so tuning changes the Rx frequency.  The
"Rev"
button reverses the Tx and Rx frequencies.  These features were suggested by
Mario, DH5YM.

I added a new parameter mic_agc_level to the config file to control the mic AGC.
 Input levels
below mic_agc_level are ignored.  The default is 0.1.  Increase this (up to 1.0)
to reduce the
AGC range, and reduce it to increase the AGC mic gain boost.

Philip Lee contributed a patch to the PulseAudio code to set the play buffer
size.

Prompted by:		portscout
Tue, 28 Apr 2015
[ 17:36 db ] Original commit 
flrig 1.3.22 comms files touched by this commit Ham Radio rig control program, cooperates with fldigi
Fix build on 10 and HEAD
Sun, 26 Apr 2015
[ 20:56 db ] Original commit 
flrig 1.3.22 comms files touched by this commit Ham Radio rig control program, cooperates with fldigi
Update to latest 1.3.22
Upstream changes to XML code and addition of K3/KX3 bandwidth control
Tue, 7 Apr 2015
[ 21:17 db ] Original commit 
nec2c .9_1 comms files touched by this commit Used to calculate antenna patterns useful to ham radio
- Unbreak build using new distribution sites
- clean up a few nits
- remove unnecessary file
[ 19:10 db ] Original commit 
nasawash 0.50 comms files touched by this commit Amateur Radio keplerian file cleanup program
- Fix nits found with portlint
- add backup distribution
- fix bad distinfo
[ 17:53 db ] Original commit 
trustedqsl 2.0.3_2 comms files touched by this commit Amateur Radio Station electronic trusted logbook
Unbreak
upstream distfile had been re-rolled causing fetch failuresd
[ 13:01 db ] Original commit 
flrig 1.3.21 comms files touched by this commit Ham Radio rig control program, cooperates with fldigi
Unbreak flrig

From flrigh Changelog

=Version 1.3.21=

2015-03-27  David Freese  <iam_w1hkj@w1hkj.com>

        d4f4f36: KX3
        45dc545: K3 update
        1f086c2: FSF address

=Version 1.3.20=

        399b37b: TT550 update
        6739d81: fix ab
        ad9bc7e: Rig server
        3bdebb6: no xmlrpc_c io
        179392e: ts2000 update
        418fe19: FT950
        962b96c: xmlrpc timing
Sun, 5 Apr 2015
[ 15:16 db ] Original commit 
xastir 2.0.6 comms files touched by this commit X Amateur Station Tracking and Information Reporting
The port in comms/xastir is version 2.0.4 from 2012.  A release 2.0.6 was
released in 2014.  The release has only minor changes, but among them
is the ability to link against BDB 5.x instead of being restricted to 4.x.
Since the current port has "WITH_BDB_HIGHEST" set to true, the highest
available is now 5.x, and the 2.0.4 would not work with 5.x, this alone
is reason to update.

I've pinged Carl several times and committing this fix anyway but will
email Carl again as a courtesy.

PR:		ports/198872
Submitted by:	russo@bogodyn.org
[ 15:10 db ] Original commit 
thebridge 1.09 comms files touched by this commit Amateur Radio Echolink conference bridge
add 'USES=shebangfix' to fix 'usermgmt.cgi' script.

PR:		ports/199056
Submitted by:	takefu@airport.fm
Mon, 23 Mar 2015
[ 01:35 db ] Original commit 
ircd-hybrid 8.2.5 irc files touched by this commit Fast irc daemon with a number of new features
- unbreak
- fix pkg-plist
Sat, 14 Mar 2015
[ 14:28 db ] Original commit 
ircd-hybrid 8.2.5 irc files touched by this commit Fast irc daemon with a number of new features
Update to 8.2.5

Feedback from upstream:

Hello,

EGD support has been dropped in ircd-hybrid 8.1.20 which was released
on July 20, 2014.

Also the compression issue has been fixed as well sometime last year.

Greets,
Michael

Bernard Spil schrieb:
(Only the first 15 lines of the commit message are shown above View all of this commit message)
[ 02:35 db ] Original commit 
chirp 0.4.1_1 comms files touched by this commit Free, open-source tool for programming your amateur radio
Fix broken pkg-plist
Wed, 11 Mar 2015
[ 13:58 db ] Original commit 
gnuradio 3.7.4_1 comms files touched by this commit Amateur Radio Software defined radio
Finally unbreak the build by preloading GCC_DEFAULT libs paths.
It is complicated by the intermix of gcc and gfortran libs being intermixed
with system libs. Especially by dynamically loaded modules into python
being linked against gfortran or current gcc. I realise using GCC_DEFAULT
lib paths is not a general solution.
Tue, 17 Feb 2015
[ 23:34 db ] Original commit 
zpu-gcc 1.0 devel files touched by this commit ZPU gcc compiler
Support full path to cc and make for external toolchains

PR:			ports/197650
Submitted by:		sbruno
Tue, 20 Jan 2015
[ 00:33 db ] Original commit 
zpu-binutils 1.0 devel files touched by this commit ZPU toolchain
Fix sed command to not break on absolute path names in CC

PR:		196901
Submitted by:	sbruno
Sat, 27 Dec 2014
[ 18:56 db ] Original commit 
flrig 1.3.19 comms files touched by this commit Ham Radio rig control program, cooperates with fldigi
- Update to latest released version
- bug fixes
Tue, 16 Dec 2014
[ 02:58 db ] Original commit 
wspr 4.00.r4198_3 comms files touched by this commit Weak signal for HF ham radio communication package
Update py-numpy use in WsprMode/spectjt.py as well
[ 02:32 db ] Original commit 
wsjt 9.1.r2511_8 comms files touched by this commit Weak signal ham radio communication package
Unbreak port
LDFLAGS= -shared breaks configure
Backport some fixes from upstream for latest py-numpy
Mon, 15 Dec 2014
[ 14:07 db ] Original commit 
wspr 4.00.r4198_2 comms files touched by this commit Weak signal for HF ham radio communication package
- Unbreak wspr
- While here fix import of zeroes removing obsolete import
  added DOS2UNIX to faciltate this change
- Do not re-add #LDFLAGS+=     -shared it breaks configure
Thu, 11 Dec 2014
[ 13:00 db ] Original commit 
py-numpy 1.9.1_1,1 math files touched by this commit The New Numeric Extension to Python
- Tiny fix to f2py2e.py to allow it to deal with -fstack-protector flag
  as without this fix, f2py will attempt to compile -fstack-protector

Submitted by:	db
Reviewed by:	wg
Approved by:	wg
Sat, 22 Nov 2014
[ 23:38 db ] Original commit 
aprsd 2.2.515 comms files touched by this commit Server daemon providing Internet access to APRS packet data
chu 0.1.29 comms files touched by this commit Synchronise computer clock to CHU radio station
cwdaemon 0.9.4 comms files touched by this commit Amateur Radio cw (Morse code) keyer daemon
ebook2cw 0.8.2 comms files touched by this commit Convert text files into cw as an mp3 or ogg file
ebook2cwgui 0.1.2_1 comms files touched by this commit gui front end for ebooks2cw
flwrap 1.3.4_1 comms files touched by this commit Flwrap is a companion utility for fldigi
geoid 1.0_7 comms files touched by this commit Geodetic computer for amateur radio use
hf 0.8_9 comms files touched by this commit Amateur Radio soundcard fsk, pactor 1, amtor, gtor, mt63
ibp 0.21_2 comms files touched by this commit Little program for monitoring amateur radio beacons
kb 8.04_8 comms files touched by this commit Amateur Radio contest logger

(Only the first 10 of 23 ports in this commit are shown above. View all ports for this commit)
- Change MAINTAINER on these hamradio ports to new ports group hamradio@
[ 21:18 db ] Original commit 
echolinux 0.17a_7 comms files touched by this commit Amateur Radio Echolink client for UNIX
- Reset MAINTAINTER to ports group hamradio@ no other changes
Fri, 21 Nov 2014
[ 15:29 db ] Original commit 
fldigi 3.22.01 comms files touched by this commit Digital decoder for psk, cw, psk31, olivia
- Update to latest 3.22.01
- Many updates added new modems, new macros, UI and bug fixes
- See http://www.w1hkj.com/downloads/fldigi/fldigi_changes.txt
Tue, 14 Oct 2014
[ 21:28 db ] Original commit 
chirp 0.4.1 comms files touched by this commit Free, open-source tool for programming your amateur radio
- modernise Makefile, fix pkg-descr
- change Maintainer to hamradio group
- update to chirp 0.4.1

Version 0.4.1 contains a special backport for Baofeng users to work
around a firmware incompatibility issue.
Thu, 9 Oct 2014
[ 12:38 db ] Original commit 
wspr 4.00.r4198 comms files touched by this commit Weak signal for HF ham radio communication package
- delete bogus old patch
Tue, 7 Oct 2014
[ 22:30 db ] Original commit 
wspr 4.00.r4198 comms files touched by this commit Weak signal for HF ham radio communication package
- update to the version 4 branch
- add LICENSE
Mon, 1 Sep 2014
[ 00:42 db ] Original commit 
gnuradio 3.7.4 comms files touched by this commit Amateur Radio Software defined radio
- Update to 3.7.4
- Important Bug Fixes and Additions
Fixed shutdown in message passing apps
Fixed PortAudio detection during configuration
Fixed QWT detection during configuration
Fixed gr::analog::agc3 volk kernel alignment
Fixed/improved support of audio on OSX
Improved performance on network-based sources and sinks
Fixed pfb_arb_resampler tag propagation
Fixed segfault in fast_atan2f
Updated codec2 support to latest standard and support all rates
New HDLC codec blocks in gr::digital
Tue, 29 Jul 2014
[ 21:22 db ] Original commit 
wsjt 9.1.r2511_3 comms files touched by this commit Weak signal ham radio communication package
- Stage wsjt
- unbreak build
Thu, 10 Jul 2014
[ 05:10 db ] Original commit 
usrp 3.4.3_2 comms files touched by this commit Ettus Research USRP driver framework
- Fix build
- stagify
- reset MAINTAINER

Approved by:	adrian
Wed, 2 Jul 2014
[ 11:39 db ] Original commit 
hamlib 1.2.15.3_1 comms files touched by this commit Shared libraries for Amateur Radio Equipment Control Applications
- hamlib should have been hamradio
Sun, 29 Jun 2014
[ 11:55 db ] Original commit 
linsmith 0.99.26_1 science files touched by this commit Smith charting program
- maintain by hamradio as we have gsmc another smith charting program
- stagify
Sat, 28 Jun 2014
[ 13:48 db ] Original commit 
fldigi 3.21.83 comms files touched by this commit Digital decoder for psk, cw, psk31, olivia
- update to 3.21.83 Maintenance release
- fix LIB_DEPENDS to use new libFOO.so form hidden in OPTIONS
- change to hamradio@ for MAINTAINER
- use shebang fix
Fri, 27 Jun 2014
[ 01:07 db ] Original commit 
wspr 3.00.r2511_6 comms files touched by this commit Weak signal for HF ham radio communication package
- Fix build
- Stagify
- change MAINTAINER to team hamradio@
Wed, 18 Jun 2014
[ 01:24 db ] Original commit 
grig 0.8.0_1 comms files touched by this commit Amateur Radio control front-end
- Now that we have more hamradio team members grab this one
[ 01:22 db ] Original commit 
gpredict 1.3 comms files touched by this commit Amateur Radio satellite tracking and prediction
- Now that we have more members in the hamradio team grab this
[ 01:17 db ] Original commit 
callsign 1.0.2 comms  Deleted Deprecated Expired files touched by this commit Amateur radio callsign lookup command
- Now that we have more members on the hamradio@ team, grab this one
[ 01:01 db ] Original commit 
trustedqsl 2.0.2 comms files touched by this commit Amateur Radio Station electronic trusted logbook
- update to latest
- the ARRL licence is a 6 part BSD

PR:		ports/190172
Submitted by:	shurd
Mon, 9 Jun 2014
[ 01:19 db ] Original commit 
aldo 0.7.5_2 comms files touched by this commit Morse code training program
- Simple fix to unbreak this port
Sun, 8 Jun 2014
[ 14:48 db ] Original commit 
wspr 3.00.r2511_5 comms files touched by this commit Weak signal for HF ham radio communication package
- Interim fix of wspr to fix build
- add staging whilst here
Thu, 15 May 2014
[ 13:41 db ] Original commit 
py-numpy 1.8.0_2,1 math files touched by this commit The New Numeric Extension to Python
- Fix compiler now that -Wl,B has been added to fortran link args

Submitted by:	me
Wed, 23 Apr 2014
[ 19:38 db ] Original commit 
svxlink 13.12 comms files touched by this commit General purpose ham radio voice services
The SvxLink project is a flexible, general purpose voice services system for
ham radio use. The project also includes Qtel, an EchoLink client GUI
application.

WWW: http://sourceforge.net/apps/trac/svxlink/

This replaces the earlier and removed comms/qtel port.

PR:		ports/188452
Submitted by:	Stephen Hurd <shurd@sasktel.net>
Sat, 19 Apr 2014
[ 02:27 db ] Original commit 
u-boot-beaglebone-eabi 2013.04 sysutils  Deleted files touched by this commit U-Boot loader for BeagleBone and BeagleBone Black
- unbreak on HEAD
- stagify
- Tim is swamped
Fri, 18 Apr 2014
[ 00:19 db ] Original commit 
aprsc 2.0.14 net files touched by this commit Plain APRS-IS server
aprsc (pronounced a-purrs-c) is a plain APRS-IS server intended to be used
on the core and Tier2 APRS-IS servers. It is written in the C language,
and it runs on Linux and Unix servers.

If you need igate or other radio-interfacing features, aprsc is not for you.

- toyo
toyokun@gmail.com

WWW: http://he.fi/aprsc

PR:		ports/188539
Submitted by:	toyokun@gmail.com
Sun, 13 Apr 2014
[ 23:37 db ] Original commit 
qsstv 8.2.7_1 comms files touched by this commit Amateur Radio SSTV/FAX reception program for unix
- Remove GCC dependency which made qsstv crash with a clang-built world.

PR:		ports/188577
Submitted by:	Stephen Hurd <shurd@sasktel.net> (maintainer)
[ 22:03 db ] Original commit 
qsstv 8.2.7 comms files touched by this commit Amateur Radio SSTV/FAX reception program for unix
Upgrade from 1.8.6 to 1.8.7:
* bug fixed system segfault when BSR is activated when no BSR was received
* bug fixed in FTP upload when using Filezilla ftp server

PR:		ports/188571
Submitted by:	Stephen Hurd <shurd@sasktel.net> (maintainer)
Sat, 12 Apr 2014
[ 23:59 db ] Original commit 
fl_moxgen 1.00 comms files touched by this commit Compute the dimensions of a Moxon Rectangle antenna
- Maintainer update: comms/fl_moxgen to latest (1.00)
- stage support

Version 1.00 - 20-JUL-2013
        * Minor updates to the documentation
        * Fixed Makefile problem with fl_moxgen_defines.h
        * Be sure Calculate was pressed before generating outputs
        * Be sure wire size input was entered prior to Calculate
        * Check legal value of AWG input

PR:		ports/188538
Submitted by:	Stephen Hurd <shurd@sasktel.net> (maintainer)
[ 23:43 db ] Original commit 
flrig 1.3.15 comms files touched by this commit Ham Radio rig control program, cooperates with fldigi
- Removed unnecessary diff

=Version 1.3.15=

2013-12-02  David Freese  <w1hkj@w1hkj.com>

        3422195: 64 bit void pointer
        fa317c3: tty search
        7732b22: TT566
        6964cb6: TS590S/TS990S/TS2000 controls
        5b340a9: FTdx1200
        e199a62: Send cmd debug
        718f46f: TS-990
        05898d5: Sliders
        c13a20e: Notch controls
        86f1d0b: 7600 split
        9f08704: Restore debug

PR:		ports/188537
Submitted by:	maintainer
[ 22:19 db ] Original commit 
fllog 1.1.8 comms files touched by this commit Ham Radio logging program
- Change from old style .if/CONFUGRE_ARGS+=/.else to new style *_CONFIGURE_*
  for the knob.

PR:		ports/188536
Submitted by:	Maintainer
[ 15:32 db ] Original commit 
fllog 1.1.8 comms files touched by this commit Ham Radio logging program
Amateur radio logbook GUI and logbook server for use with fldigi and friends.
The logbook server maintains a large set of QSO logbook fields that will
probably be sufficient for casual operating, contesting and some certificate
logging.  All of the fields that are captured in the logbook are maintained
in an ADIF database.

WWW: http://www.w1hkj.com/fllog-help/index.html

PR:		ports/188487
Submitted by:	Stephen Hurd <shurd@sasktel.net>
Fri, 11 Apr 2014
[ 23:57 db ] Original commit 
flrig 1.3.13 comms files touched by this commit Ham Radio rig control program, cooperates with fldigi
Flrig is a transceiver control program designed to be used either stand alone
or as an adjunct to fldigi.  The supported transceivers all have some degree
of CAT.  The flrig user interface changes to accommodate the degree of CAT
support available for the transceiver in use.

WWW: http://www.w1hkj.com/flrig-help/index.html

PR:		ports/188454
Submitted by:	Stephen Hurd <shurd@sasktel.net>
[ 22:15 db ] Original commit 
qsstv 8.2.6 comms files touched by this commit Amateur Radio SSTV/FAX reception program for unix
- add missing file somehow dropped in ports/188454

Submitted by:	Maintainer
[ 19:36 db ] Original commit 
qsstv 8.2.6 comms files touched by this commit Amateur Radio SSTV/FAX reception program for unix
- update comms/sstv to latest release
- bug fix ftp transfer when using subdirectories ( reported by Ken G7VJA)
- bug fix for sound file output when recording while transmitting (Jem)

PR:		ports/188416
Submitted by:	Stephen Hurd <shurd@sasktel.net> (maintainer)
Number of commits: 395 (showing only 100 on this page) 1 | 2 | 3 | 4  »  
Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
chromiumJul 22
krb5-114Jul 21
mariadb100-server*Jul 21
mariadb101-server*Jul 21
mariadb55-server*Jul 21
mysql55-server*Jul 21
mysql56-server*Jul 21
mysql57-server*Jul 21
openoffice-4Jul 21
openoffice-develJul 21
percona55-server*Jul 21
typo3Jul 18
typo3-ltsJul 18
atutorJul 16
atutorJul 16

18 vulnerabilities affecting 35 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 26058
Broken 80
Deprecated 122
Ignore 351
Forbidden 0
Restricted 201
No CDROM 83
Vulnerable 74
Expired 10
Set to expire 109
Interactive 0
new 24 hours 5
new 48 hours6
new 7 days23
new fortnight95
new month168

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.