non port: shells/vshnu/Makefile |
Number of commits found: 30 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 20 Jul 2022
|
14:22 Tobias C. Berner (tcberner)
shells: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Weinberger <adamw@FreeBSD.org>
* Andreas Kohn <andreas@syndrom23.de>
* Carlos Jacobo Puga Medina <cpm@FreeBSD.org>
* Cyrille.Lefevre@laposte.net
* Danijel Tasov <danielt@pilgerer.org>
* David O'Brien <obrien@NUXI.com>
* Emanuel Haupt <ehaupt@FreeBSD.org>
* Hajimu UMEMOTO <ume@FreeBSD.org>
* Igor Pokrovsky <ip@unixway.org>
* Jean-Yves Lefort <jylefort@brutele.be>
* Kai Wang <kaiw27@gmail.com>
* Martin Wilke <miwi@FreeBSD.org>
* Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
* Oliver Eikemeier
* Patrick Gardella <patrick@FreeBSD.org>
* Pawel Pekala <pawel@FreeBSD.org>
* Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* Richard Rose <freebsd-security@rikrose.net>
* Sean Chittenden <seanc@FreeBSD.org>
* Sergey Matveychuk <sem@FreeBSD.org>
* Serhii (Sergey) Kozlov <skozlov@FreeBSD.org>
* Shinsuke Matsui <smatsui@karashi.org>
* Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* Sylvio Cesar <sylvio@FreeBSD.org>
* Thomas Gellekum <tg@FreeBSD.org>
* UMENO Takashi <umeno@rr.iij4u.or.jp>
* Vaida Bogdan
* Will Andrews <andrews@technologist.com>
* Ying-Chieh Liao <ijliao@FreeBSD.org>
* conrads@cox.net
* erich@rrnet.com
* gebhart@secnetix.de
* kirk@strauser.com
* mcglk@artlogix.com
* torstenb
With hat: portmgr
c3cc2da |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Monday, 6 Apr 2020
|
16:31 fernape
shells/vshnu: update to 1.0500
ChangeLog: https://legacy.cs.indiana.edu/~kinzler/vshnu/vshnu.html
Accumulated changes:
* Add f and F flags to &run
* Add $dotdotdot; Add lazy command evaluation
* Fix &df to always refresh and &diskspace align bug
* Add $getch for initial command key input
* Add %nobag for actions on unassigned bag keys
* Add $disksgvfs for user gvfs mounts in disks list
* Use Getopt::Std; Add -f command line option
* Add -[cCkK] command line options
* Uppercase $vname and $version variables
* Add 2 flag to &run
* Use x option to suppress file coloring as executable
* Fix compatibility for Term::ANSIColor > 3.02
PR: 245376
Submitted by: cpeticus@gmail.com
|
Sunday, 25 Feb 2018
|
09:03 amdmi3
- Add LICENSE
- norach
- Update WWW
|
Friday, 1 Apr 2016
|
14:25 mat
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
Wednesday, 26 Nov 2014
|
13:08 mat
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.
As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.
The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.
The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.
PR: 194969
Differential Revision: https://reviews.freebsd.org/D1019
Exp-run by: antoine
Reviewed by: perl@
Approved by: portmgr
|
Tuesday, 18 Nov 2014
|
09:37 bapt
Reset miwi's maintainership per his demand
Hope to see you back! Thank for all the work!
|
Friday, 20 Jun 2014
|
00:09 adamw
Use the USES=tar:... variants.
|
Friday, 27 Dec 2013
|
09:24 bapt
Support stage and fix shebangs
|
Friday, 20 Sep 2013
|
22:57 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
shells)
|
Thursday, 12 Sep 2013
|
06:27 az
- convert to the new perl5 framework
- trim Makefile header
Approved by: portmgr (bapt@, blanket)
|
Tuesday, 5 Jun 2012
|
09:50 az
- Remove SITE_PERL from *_DEPENDS
Approved by: maintainer (miwi@ via email)
|
Saturday, 21 Jan 2012
|
17:40 eadler
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
Thursday, 28 May 2009
|
23:18 miwi
- Update to 1.0305
|
Sunday, 3 May 2009
|
10:26 miwi
- Update to 1.0304
|
Thursday, 28 Feb 2008
|
16:57 miwi
- File was repacked
Submitted by: erwinbot
|
Saturday, 8 Sep 2007
|
01:04 linimon
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr
|
Wednesday, 5 Sep 2007
|
07:19 miwi
- Update to 1.0300
|
Friday, 16 Jun 2006
|
22:17 miwi
Obey conventions and change my mail to @FreeBSD.org address
Approved by: krion (mentor)
|
Sunday, 23 Apr 2006
|
18:28 vs
- Update to latest version
- Assign maintainership to submitter
PR: ports/95974
Submitted by: Martin Wilke
|
Thursday, 21 Apr 2005
|
15:13 krion
Update to version 1.0136
PR: ports/80210
Submitted by: Ports Fury
|
Thursday, 15 Jul 2004
|
09:04 ijliao
upgrade to 1.0124
|
Monday, 22 Mar 2004
|
15:30 clement
- Update to 1.0115
- Clean Makefile
- Make portlint happy
|
Friday, 24 Oct 2003
|
12:05 ijliao
utilize SITE_PERL
PR: 58166
Submitted by: Cheng-Lung Sung <clsung@dragon2.net>
|
Thursday, 20 Feb 2003
|
18:59 knu
De-pkg-comment.
|
Friday, 24 Jan 2003
|
13:33 ijliao
upgrade to 1.0107
|
Friday, 24 Aug 2001
|
22:32 tobez
Remove redundant USE_PERL5 statements.
|
Wednesday, 13 Jun 2001
|
16:00 ijliao
upgrade to 1.0008 make RUN_DEPENDS also BUILD_DEPENDS drop maintainership
|
Sunday, 25 Feb 2001
|
19:35 ijliao
add vshnu, the New Visual Shell
|
Number of commits found: 30 |