23:28 Craig Leres (leres) 

textproc/py-qrcode: Install man page in share/man

    af98028

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

19:55 Craig Leres (leres) 

textproc/py-qrcode: Update to 7.4

Changes since 7.3:

 - Improvements for embedded image.

 - Restructure the factory drawers, allowing different shapes in
   SVG image factories as well.

 - Add a ``--factory-drawer`` option to the ``qr`` console script.

 - Optimize the output for the ``SVGPathImage`` factory (more than
   30% reduction in file sizes).

 - Add a ``pypng`` image factory as a pure Python PNG solution. If
   ``pillow`` is *not* installed, then this becomes the default
   factory.

 - The ``pymaging`` image factory has been removed, but its factory
   shortcut and the actual PymagingImage factory class now just
   link to the PyPNGImage factory.

Reported by:	portscout

    146ec19

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:23 Tobias C. Berner (tcberner) 

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@FreeBSD.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Kapranoff <kappa@FreeBSD.org.ua>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexander@Leidinger.net
  *  Alexandre Biancalana <ale@biancalanas.net>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexis Praga <alexis.praga@free.fr>
  *  Andreas Heil <ah@linux-hq.de>
  *  Andrei V. Shetuhin <reki@reki.ru>
  *  Andrej Zverev <andrey.zverev@electro-com.ru>
  *  Andrew <andrew@ugh.net.au>
  *  Andrew Humphrey <ahumphrey@realestate.com.au>
  *  Andrew Lewis <freeghb@gmail.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrew Romero <melanhit@gmail.com>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Andrey Zakhvatov
  *  Andrey Zakhvatov <andy@FreeBSD.org>
  *  Anes Mukhametov <anes@anes.su>
  *  Antoine Brodin <antoine@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Yudin <toha@toha.org.ua>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Ashish SHUKLA <wahjava@gmail.com>
  *  Autrijus Tang <autrijus@autrijus.org>
  *  Babak Farrokhi <farrokhi@FreeBSD.org>
  *  Ben Haga <tuxsuximus@hotmail.com>
  *  Ben Woods <woodsb02@FreeBSD.org>
  *  Benno Rice <benno@jeamland.net>
  *  Bill "I hate Perl" Fumerola
  *  Bill Brinzer <bill.brinzer@gmail.com>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Bill Swingle <unfurl@FreeBSD.org>
  *  Bob Eager <rde@ml1.org.uk>
  *  Boris Samorodov <bsam@FreeBSD.org>
  *  Brian Candler <B.Candler@pobox.com>
  *  Brion Moss <brion@queeg.com>
  *  Carlos J Puga Medina <cpm@fbsd.es>
  *  Carlos J. Puga Medina <cpm@FreeBSD.org>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Hutchinson <portmaster@bsdforge.com>
  *  Christoper Key <cjk32@cam.ac.uk>
  *  Clemens Zauner <czauner+ports@onlineloop.com>
  *  Cyrille Lefevre <clefevre@citeweb.net>
  *  Dan Langille <dvl@FreeBSD.org>
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Danilo G. Baio <dbaio@FreeBSD.org>
  *  David Bremner <bremner@unb.ca>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David Sze <dsze@alumni.uwaterloo.ca>
  *  Denis Pokataev <catone@cpan.org>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dereckson <dereckson@gmail.com>
  *  Dikshie
  *  Dikshie <dikshie@sfc.wide.ad.jp>
  *  Dima Sivachenko <demon@gpad.ac.ru>
  *  Dirk Froemberg <dirk@FreeBSD.org>
  *  Ditesh Shashikant Gathani <ditesh@gathani.org>
  *  Dmitry Morozovsky <marck@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dom Mitchell <dom@happygiraffe.net>
  *  Don Croyle <croyle@gelemna.org>
  *  Donald Burr <dburr@FreeBSD.org>
  *  Douglas Thrift <douglas@douglasthrift.net>
  *  Dru Lavigne <dru@FreeBSD.org>
  *  Dryice Liu <dryice@dryice.name>
  *  Ed Schouten <ed@FreeBSD.org>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Elvis Chiang <elvis@sslab.cs.ccu.edu.tw>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric A. Griff <eric@talesfromthereal.com>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik Greenwald <erik@smluc.org>
  *  Ernst de Haan <znerd@FreeBSD.org>
  *  Erwin Lansing <erwin@FreeBSD.org>
  *  Espen Tagestad <espen@tagestad.no>
  *  Eugene Furs <justas@mbank.lv>
  *  Felippe de Meirelles Motta <lippemail@gmail.com>
  *  Felix Palmen <felix@palmen-it.de>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Filip Parag <filip@parag.rs>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Freddie Cash <fcash@sd73.bc.ca>
  *  Frederic Culot <culot@FreeBSD.org>
  *  Frederic Dubuy <fdubuy@free.fr>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Garrett Rooney <rooneg@electricjellyfish.net>
  *  Gasol Wu <gasol.wu@gmail.com>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffroy Desvernay <dgeo@centrale-marseille.fr>
  *  George Hartzell <hartzell@fruitfly.org>
  *  Gerald Pfeifer <gerald@pfeifer.com>
  *  Gerrit Beine <gerrit.beine@gmx.de>
  *  Glenn Trewitt <glenn@trewitt.org>
  *  Goran Tal <goran.tal@gmail.com>
  *  Graham Todd <gtodd@bellanet.org>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Hansjoerg Pehofer <hansjoerg.pehofer@uibk.ac.at>
  *  Henrik Motakef <henrik.motakef@web.de>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Herve Quiroz <herve.quiroz@esil.univ-mrs.fr>
  *  Herve Quiroz <hq@FreeBSD.org>
  *  Hiroki Sato <hrs@FreeBSD.org>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Ian Vaudrey <i.vaudrey@bigfoot.com>
  *  Ilya A. Arkhipov <rum1cro@yandex.ru>
  *  Jaap Boender <jaapb@kerguelen.org>
  *  James Earl
  *  James Flemer <jflemer@alum.rpi.edu>
  *  James Raftery <james@now.ie>
  *  Jason Burgess <dev@fenux.net>
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeff Putsch <jdputsch@comcast.net>
  *  Jeremy Shaffner <jeremy@external.org>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Jim Mock <jim@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johann Visagie <johann@egenetics.com>
  *  Johann Visagie <wjv@FreeBSD.org>
  *  Johannes Jost Meixner <xmj@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John MacFarlane <jgm@berkeley.edu>
  *  John Marino <marino@FreeBSD.org>
  *  Jonathan Chen <jonc@chen.org.nz>
  *  Jos Backus <josb@cncdsl.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Josh Gilliam <josh@quick.net>
  *  Jov <amutu@amutu.com>
  *  Jui-Nan Lin <jnlin@csie.nctu.edu.tw>
  *  Julien Laffaye <kimelto@gmail.com>
  *  Jun Kuriyama <kuriyama@opt.phys.waseda.ac.jp>
  *  Jyun-Yan You <jyyou@cs.nctu.edu.tw>
  *  KANOU Hiroki <kanou@khdd.net>
  *  KIMURA Yasuhiro <yasu@utahime.org>
  *  KIRIYAMA Kazuhiko <kiri@FreeBSD.org>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Kimura Fuyuki <fuyuki@mj.0038.net>
  *  Kimura Fuyuki <fuyuki@nigredo.org>
  *  Konstantin Menshikov <kostjnspb@yandex.ru>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kouichi ABE (WALL) <kouichi@mysticwall.com>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kuan-Chung Chiu <buganini@gmail.com>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Lidl <kurt.lidl@cello.com>
  *  Lars Balker Rasmussen <lbr@FreeBSD.org>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Thegler <lars@thegler.dk>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Leland Wang <llwang@infor.org>
  *  Leo Kim <leo@florida.sarang.net>
  *  Lev Serebryakov <lev@serebryakov.spb.ru>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Loic Pefferkorn <loic-freebsd@loicp.eu>
  *  MANTANI Nobutaka <nobutaka@FreeBSD.org>
  *  MIHIRA Yoshiro <sanpei@FreeBSD.org>
  *  Marcin Cieslak
  *  Marcin Jessa <yazzy@yazzy.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark R V Murray <mark@grondar.za>
  *  Martin Kammerhofer
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Marwan Burelle <marwan.burelle@lri.fr
  *  Masahiro Teramoto <markun@onohara.to>
  *  Mathieu Arnold <m@absolight.net>
  *  Matt Mills <matt_mills@btopenworld.com>
  *  Matthew Fuller <fullermd@over-yonder.net>
  *  Matthew Seaman
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Mauricio Herrera Cuadra <mauricio@arareko.net>
  *  Max Baryshnikov <mephius@gmail.com>
  *  Max N. Boyarov <m.boyarov@gmail.com>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Meno Abels <meno.abels@adviser.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Moll <kvedulv@kvedulv.de>
  *  Michael Ranner <michael@ranner.eu>
  *  Michael Schout <mschout@gkg.net>
  *  Mike Bristow <mike@urgle.com>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Moggie <moggie@elasticmind.net>
  *  Mykola Dzham <freebsd@levsha.org.ua>
  *  Naram Qashat <cyberbotx@cyberbotx.com>
  *  Neil Booth
  *  Nicola Stanislao Vitale <nivit@FreeBSD.org
  *  Nicola Stanislao Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nik Clayton <nik@FreeBSD.org>
  *  Nikola Lecic <nikola.lecic@anthesphoria.net>
  *  Nosov Artem <chip-set@mail.ru>
  *  Oleg Mamontov <oleg@mamontov.net>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Oliver Eikemeier <eikemeier@fillmore-labs.com>
  *  Oliver Lehmann (oliver@FreeBSD.org)
  *  Olivier Duchateau
  *  Olivier Duchateau <olivierd@FreeBSD.org>
  *  Olivier Girard <Olivier.Girard@univ-angers.fr>
  *  Patrick Li <pat@databits.net>
  *  Patrick Powell <papowell@astart.com>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pav Lucistnik <pav@oook.cz>
  *  Pavel Timofeev <timp87@gmail.com>
  *  Pawel Pekala <pawel@FreeBSD.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Johnson <johnson.peter@gmail.com>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Peter Schuller <peter.schuller@infidyne.com>
  *  Petteri Valkonen <petteri.valkonen@iki.fi>
  *  Pietro Cerutti <gahr@gahr.ch>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Piotr Rybicki <meritus@innervision.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Radim Kolar <hsn@sanatana.dharma>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Rene Ladan <rene@FreeBSD.org>
  *  René Ladan <rene@freebsd.org>
  *  Richard Gallamore <ultima@FreeBSD.org>
  *  Rick van der Zwet <info@rickvanderzwet.nl>
  *  Robert Gogolok <gogo@cs.uni-sb.de>
  *  Rod Taylor <ports@rbt.ca>
  *  Rodrigo OSORIO <rodrigo@FreeBSD.org>
  *  Roger Leigh <rleigh@codelibre.net>
  *  Rong-En Fan <rafan@infor.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Russell Cloran <russell@rucus.ru.ac.za>
  *  Russell Jackson <raj@csub.edu>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Samuel Tardieu <sam@inf.enst.fr>
  *  Sascha Holzleiter <sascha@root-login.org>
  *  Scott Sanders <scott@jssjr.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Serge Gagnon <ser_gagnon@sympatico.ca>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sergei Vyshenski <svysh.fbsd@gmail.com>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shen Chun-Hsing <statue@freebsd.netlab.cse.yzu.edu.tw>
  *  Shinsuke Matsui <smatsui@karashi.org>
  *  Silvio Ap Silva aka kanazuchi <alvolivre@live.com>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simon Olofsson <simon@olofsson.de>
  *  Soeren Boll Overgaard <boll@tolkien.dk>
  *  Sofian Brabez <sbz@FreeBSD.org>
  *  Stanislav Svirid <count@211.ru>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Pauly <stefan@fh-mainz.de>
  *  Stefan Walter <sw@gegenunendlich.de>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stephen Roznowski (sjr@home.com)
  *  Stephon Chen <stephon@gmail.com>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steve Wills <swills@rubick>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  Sven R <freebsd@hackacad.net>
  *  Sébastien Santoro <dereckson@gmail.com>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAKATSU Tomonari <tota@rtfm.jp>
  *  TERAMOTO Masahiro <markun@onohara.to>
  *  Thierry Thomas <thierry@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thorsten Greiner <thorsten.greiner@web.de>
  *  Tilman Linneweh <arved@FreeBSD.org>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Timur Bakeyev <bat@cpan.org>
  *  Timur I. Bakeyev <timur@gnome.org>
  *  Toby Allsopp <toby@mi6.gen.nz>
  *  Tom Judge <tj@FreeBSD.org>
  *  Tom Judge <tom@tomjudge.com>
  *  Tom Sparks <tsparks@appliedops.net>
  *  Tomoyuki Sakurai <cherry@trombik.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Torsten Zuehlsdorff <tz@FreeBSD.org>
  *  Travis Campbell <hcoyote@ghostar.org>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Ulrich Spoerlein <uqs@FreeBSD.org>
  *  Ulrich Spoerlein <uspoerlein@gmail.com>
  *  Uwe Pierau <uwe.pierau@tu-clausthal.de>
  *  Vadim Vatlin
  *  Vany <ivan@serezhkin.com>
  *  Vasek Balcar <vasek@ti.cz>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vidar Karlsen <vidar@karlsen.tech>
  *  Vivek Khera <vivek@khera.org>
  *  Volker Stolz <vs@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Waitman Gobble <waitman@waitman.net>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen Heping<wen@FreeBSD.org>
  *  Will Andrews <will@FreeBSD.org>
  *  William Grzybowski <wg@FreeBSD.org>
  *  Xavier Humbert <xavier@amdh.fr>
  *  Xin LI <delphij@FreeBSD.org>
  *  Yarema <yds@CoolRat.org>
  *  Yarema <yds@Necessitu.de>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yen-Ming Lee <leeym@cae.ce.ntu.edu.tw>
  *  Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yoshiro MIHIRA <sanpei@sanpei.org>
  *  Yoshiro MIHIRA <sanpei@yy.cs.keio.ac.jp>
  *  Yuan-Chung Hsiao <ychsiao@ychsiao.org>
  *  Yukihiro Nakai <Nakai@technologist.com>
  *  Yuri Pankov <yuri.pankov@gmail.com>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zane C. Bowers-Hadley <vvelox@vvelox.net>
  *  Zeus Panchenko <zeus@gnu.org.ua>
  *  Zhen REN <bg1tpt@gmail.com>
  *  Zhihao Yuan <lichray@gmail.com>
  *  ache
  *  andreas@marvin.robin.de
  *  andrey@kostenko.name
  *  anholt@FreeBSD.org
  *  antoine@FreeBSD.org
  *  arved
  *  b.f. <bf@FreeBSD.org>
  *  bf@FreeBSD.org
  *  brett@peloton.physics.montana.edu
  *  buganini@gmail.com
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  chinsan <chinsan@mail2000.com.tw>
  *  clsung
  *  clsung@dragon2.net
  *  dannyman <dannyman@tellme.com>
  *  dd
  *  domi@saargate.de
  *  eivind
  *  eric
  *  faber@lunabase.org
  *  fenner
  *  fenner@FreeBSD.org
  *  gahr
  *  gugabsd <gugabsd@mundounix.com.br>
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  jabley@automagic.org
  *  janos.mohacsi@bsd.hu
  *  jfieber
  *  jkoshy
  *  john@zoner.org
  *  jupengfei <jupengfei@gmail.com>
  *  kai
  *  kevit
  *  king@v2project.com
  *  kuriyama
  *  lars.eggert@gmx.net
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lofi@FreeBSD.org
  *  lth@FreeBSD.org
  *  mainland@apeiron.net
  *  mandree@FreeBSD.org
  *  markm@FreeBSD.org
  *  meyser@xenet.de
  *  mike
  *  milki <milki@rescomp.berkeley.edu>
  *  nectar
  *  nik
  *  nivit@users.sourceforge.net
  *  nork@FreeBSD.org
  *  paulh@logicsquad.net
  *  petef@databits.net
  *  peter.schuller@infidyne.com
  *  philip@p6m7g8.com
  *  ports@c0decafe.net
  *  reed@pugetsoundtechnology.com
  *  rfarmer@predatorlabs.net
  *  risner@stdio.com
  *  scheidell@secnap.net
  *  shige
  *  skreuzer
  *  snowchyld
  *  steve
  *  sumikawa@FreeBSD.org
  *  sumikawa@kame.net
  *  thierry@pompo.net
  *  tj@FreeBSD.org
  *  trasz
  *  trevor
  *  vanilla
  *  wen@FreeBSD.org
  *  wosch
  *  znerd@FreeBSD.org

With hat:	portmgr

    5cf7e35

04:19 Po-Chuan Hsieh (sunpoet) 

textproc/py-qrcode: Add NO_ARCH

Approved by:	portmgr (blanket)

    87ce034

23:25 Craig Leres (leres) 

textproc/py-qrcode: Update to 7.3

Changes since 6.1:

 - Add --ascii parameter to command line interface allowing to
   output ascii when stdout is piped

 - Add --output parameter to command line interface to specify
   output file

 - Accept RGB tuples in fill_color and back_color

 - Add to_string method to SVG images

 - Replace inline styles with SVG attributes to avoid CSP issues

 - Add Styled PIL image factory, allowing different color masks and
   shapes in QR codes

 - Small performance inprovement

 - Add check for border size parameter

 - Skip color mask if QR is black and white

Reported by:	portscout

    0f8aed3

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

19:54 antoine 

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

 

11:36 kai 

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version
  requirements of Pillow for www/py-wagtail.

Release Notes:

* https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (7.0.0):

*
https://pillow.readthedocs.io/en/latest/releasenotes/7.0.0.html#backwards-incompatible-changes

Detailed Changelog:

* https://github.com/python-pillow/Pillow/blob/7.0.0/CHANGES.rst

PR:		243665
Submitted by:	sunpoet (patch for 7.0.0 and repo-copied version)
Reviewed by:	koobs [1], sunpoet
Approved by:	koobs (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23713

 

01:29 leres 

textproc/py-qrcode: Update to 6.1. From CHANGES.rst:

 - Fix short chunks of data not being optimized to the correct mode.

 - Tests fixed for Python 3

Reported by:	portscout
Approved by:	matthew (mentor, implicit)

 

06:18 antoine 

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

 

22:36 leres 

Update to 6.0:

 - Fix optimize length being ignored in QRCode.add_data.

 - Better calculation of the best mask pattern and related
   optimizations.

Reviewed by:	matthew (mentor)
Approved by:	matthew (mentor)
Differential Revision:	https://reviews.freebsd.org/D15930

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

02:43 leres 

Allow concurrent installation (USE_PYTHON=concurrent).

PR:		225842
Submitted by:	John Hein
Reviewed by:	ler (mentor)
Approved by:	ler (mentor)
Differential Revision:	https://reviews.freebsd.org/D14342

 

21:56 leres 

Patch setup.py to install the man page in ${PREFIX}/man/man1
instead of ${PREFIX}/share/man/man1

Assume matainership (the current maintainer requests being removed
in PR 224219).

PR:		224219
Reviewed by:	ler (mentor)
Approved by:	ler (mentor)
Differential Revision:	https://reviews.freebsd.org/D13902

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

08:41 ehaupt 

Fix dependencies for py3-* stub port.

 

18:53 ehaupt 

Add python3 stub ports required for the upcoming update of finance/electrum.

Approved by:	portmgr (bdrewery)
Differential Revision:	D13000

 

13:10 wen 

- Update to 5.3

PR:		214525
Submitted by:	yuri@rawbw.com
Approved by:	kyuupichan@gmail.com(maintainer)

 

14:25 mat 

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

 

10:16 xmj 

textproc/py-qrcode: Add port

This module uses image libraries, Python Imaging Library (PIL) by
default, to generate QR Codes.

A Quick Response code is a two-dimensional pictographic code used
for its fast readability and comparatively large storage capacity.
The code consists of black modules arranged in a square pattern on
a white background. The information encoded can be made up of any
kind of data (e.g., binary, alphanumeric, or Kanji symbols)

WWW: https://github.com/lincolnloop/python-qrcode

PR:		196046
Differential Revision:	https://reviews.freebsd.org/D1631
Submitted by:	kyuupichan@gmail.com
Approved by:	koobs (mentor)