Number of commits found: 329 (showing only 100 on this page)

1 | 2 | 3 | 4  »  

Update third-party module naxsi from 0.45 to 0.46-1.

Do not bump PORTREVISION because this module is disabled by default.

Add third-party RTMP module, v.0.1.5,
https://github.com/arut/nginx-rtmp-module.

Note! The RTMP module does not share data between workers and only
works in one-worker mode.

Do not bump PORTREVISION because this module is disabled by default.

Spotted by:     Patrick Ernst aka patrick dot ernst at maxxbone dot com

Update third-party modules (openresty 1.0.15.5):

o) lua     - from 0.5.0rc27 to 0.5.0rc28;
o) rds_scv - from 0.05rc1 to 0.05rc2.

Remove needless patch.

Do not bump PORTREVISIONs because these modules are disabled by default.

Update third-party modules (openresty 1.0.15.3):

o) lua      - from 0.5.0rc24 to 0.5.0rc27;
o) set_misc - from 0.22rc5 to 0.22rc7;
o) srcache  - from 0.13rc6 to 0.13rc8;

Do not bump PORTREVISIONs because these modules are disabled by default.

Add two new third-party modules:

1) let, 0.0.4;
2) upstream_sticky, 1.0;

Do not bump PORTREVISIONs because these modules are disabled by default.

Spotted by:     Serguei Okladnikov <oklaspec@mail.ru> (1)
PR:             167494                                (2)

Update third-party modules (openresty 1.0.11.28):

o) echo    - from 0.38rc1 to 0.38rc2;
o) lua     - from 0.4.1 to 0.5.0rc24;
o) rds-csv - from 0.04 to 0.05rc1;
o) redis2  - from 0.08rc2 to 0.08rc4;
o) srcache - from 0.13rc3 to 0.13.rc6;
o) xss     - from 0.03rc8 to 0.03rc9;
o) iconv   - from 0.10rc5 to 0.10rc7;

Do not bump PORTREVISIONs because these modules are disabled by default.

Add one more WWW site to pkg-descr file.
Remove -DNGX_DEBUG_MALLOC flag.         (*)
Bump PORTREVISION.

Requested by:   Maxim Dounin aka mdounin at mdounin dot ru (*)

Update to latest stable version 1.2.0.

<ChangeLog>

*) Bugfix: a segmentation fault might occur in a worker process if the
   "try_files" directive was used; the bug had appeared in 1.1.19.

*) Bugfix: response might be truncated if there were more than IOV_MAX
   buffers used.

*) Bugfix: in the "crop" parameter of the "image_filter" directive.
   Thanks to Maxim Bublis.

</ChangeLog>

Update pkg-descr to modern variant.
Bump PORTREVISIONs.

PR:     ports/167089

Update third-party naxsi module rom 0.43 to 0.45.

Do not bump PORTREVISIONs because this module disabled by default.

PR:     ports/167166, ports/167167

Update from 3.0.11 to 3.0.12:

o) www/rubygem-passenger;
o) third-party passenger module for www/nginx and www/nginx-devel.

Security update from 1.0.14 to 1.0.15.

<ChangeLog>

*) Security: specially crafted mp4 file might allow to overwrite memory
   locations in a worker process if the ngx_http_mp4_module was used,
   potentially resulting in arbitrary code execution (CVE-2012-2089).
   Thanks to Matthew Daley.

*) Bugfix: in the ngx_http_mp4_module.

</ChangeLog>

Update third-party ngx_http_redis from 0.3.5 to 0.3.6.
Add USERS/GROUPS for www/nginx.

Do not bump PORTREVISIONs because this module disabled by default.

Feature safe:   yes

<ChangeLog>

*) Feature: redis_gzip_flag.  Usefull if you are prefer to
   store data compressed in redis.  Works with ngx_http_gunzip_filter
   module.
   Thanks to Maxim Dounin.

*) Bugfix: ngx_http_redis_module might issue the error message
   "redis sent invalid trailer".
   Thanks to agentzh.

</ChangeLog>

Security update from 1.0.13 to 1.0.14.

Security:      
http://www.vuxml.org/freebsd/29194cb8-6e9f-11e1-8376-f0def16c5c1b.html
Feature safe:   yes

<ChangeLog>

*) Security: content of previously freed memory might be sent to a
   client if backend returned specially crafted response.
   Thanks to Matthew Daley.

</ChangeLog>

Update from 1.0.12 to 1.0.13.

<ChangeLog>

*) Feature: the "return" and "error_page" directives can now be used to
   return 307 redirections.

*) Bugfix: a segmentation fault might occur in a worker process if the
   "resolver" directive was used and there was no "error_log" directive
   specified at global level.
   Thanks to Roman Arutyunyan.

*) Bugfix: memory leaks.
   Thanks to Lanshun Zhou.

(Only the first 15 lines of the commit message are shown above )

Fix fetch notice third-party module.

Fix fetch zip and naxsi third-party modules.

Update third-party naxsi module from 0.42 to 0.43.
Fix libraries dependences if WITH_LUA_MODULE knob defined. [1]

Do not bump PORTREVISIONs because this module disabled by default.

Submitted by:   Alexandre Biancalana <ale@biancalanas.net> [1]

Update slowfs_cache third-party module from 1.7 to 1.8.

Do not bump PORTREVISIONs because this module disabled by default.

<ChangeLog>

2012-02-28    VERSION 1.8
  * Fix setting of slowfs process title.
    In case when local path was over 277 characters long, slowfs
    process would crash, which would result in file not being
    copied to the cache.
    Bug had appeared in version 1.7.
</ChangeLog>

Update slowfs_cache third-party module from 1.6 to 1.7.

Do not bump PORTREVISION because this module disabled by default.

<ChangeLog>

2012-02-28    VERSION 1.7
  * Fix on-disk cache size calculation.
    Since the initial release, recorded on-disk cache size was
    decreased twice for purged content (once during cache purge
    and once during subsequent cache update).
    This resulted in recorded on-disk cache size being much
    smaller than in reality, which could lead to on-disk cache
    outgrowing defined "max_size" parameter.
    Patch from Pyry Hakulinen (via ngx_cache_purge, months ago).

  * Append path of the file being cached to the slowfs process
    title.

</ChangeLog>

Add two third-party modules:

o) web_dav_extension, for support missing PROPFIND and OPTIONS commands;
o) http_auth_digest, providing support for RFC 2617 Digest Authentication.

PR:     165276, 165333

Bump pcre library dependency due to 8.30 update

Update from 1.0.11 to 1.0.12.

<ChangeLog>

*) Feature: the "TLSv1.1" and "TLSv1.2" parameters of the
   "ssl_protocols" directive.

*) Feature: the "if" SSI command supports captures in regular
   expressions.

*) Bugfix: the "if" SSI command did not work inside the "block" command.

*) Bugfix: in AIO error handling on FreeBSD.

*) Bugfix: in the OpenSSL library initialization.

(Only the first 15 lines of the commit message are shown above )

Use ${LOCALBASE} instead of ${PREFIX} for search headers and libraries
for third-party modules.

Do not bump PORTREVISIONs.

Update third-party modules:

o) echo from 0.37 to 0.38rc1;
o) headers_more from 0.16 to 0.17rc1;
o) drizzle from 0.1.2rc4 to 0.1.2rc6;
o) set_misc from 0.22rc4 to 0.22rc5.

Update third-party lua module from 0.4.0 to bugfix release 0.4.1.

Move luajit from devel to lang directory.

Notice from:    linimon

Update third-party modules:

o) memc from 0.12 to 0.13rc3;
o) redis2 from 0.07 to 0.08rc2;
o) set_misc from 0.22rc3 to 0.22rc4;
o) srcache from 0.12 to 0.13rc3;
o) xss from 0.03rc3 to 0.03rc8.

Update third-party encrypted_session module from 0.01 to 0.02.

Update third-party headers_more module from 0.15 to 0.16.

<ChangeLog>

* bugfix: the on-demand handler/filter registration mechanism did
  not work fully for config reload via the HUP signal.

* bugfix: when setting a multi-value response header to a single
  value, the single value might be repeated on each old value.

* feature: added some debugging outputs that can be enabled by
  the --with-debug option when building nginx or ngx_openresty.

* bugfix: we should set header hash using ngx_hash_key_lc, not
  simply to 1.

(Only the first 15 lines of the commit message are shown above )

Update third-party echo module from 0.36 to 0.37.

Add 4 third-party modules:

o) arrayvar, add support for array variables to nginx config files;
o) encrypted-session, for encrypt and decrypt nginx variable values;
o) form-input, reads HTTP POST and PUT request body encoded in
   "application/x-www-form-urlencoded", and parse the arguments in
   request body into nginx variables;
o) iconv, to convert characters of different encoding (by libiconv).

Update third-party lua module from 0.3 to latest stable version 0.4.
Also, switched from default lua interpreter to luajit - a Lua Just-In-Time
compiler
for speed-up lua module based applications (nginx's configurations).
Fix issue with %%PREFIX%% substitution for lua module.

Add three new third-party modules:

o) drizzle -  an upstream module that talks to mysql and drizzle by libdrizzle;
o) rds_csv -  an output filter module to convert Resty-DBD-Streams (RDS) to
   Comma-Separated Values (CSV);
o) rds_json - an output filter that formats Resty DBD Streams generated by
   ngx_drizzle and others to JSON.

Do not bump PORTREVISION because these modules disabled by default.

Update third-party http_subs_filter module from 0.5.2.r45 to 0.5.2.r53.
Remove needless extra patch.

Update third-party upload_progress module from 0.8.2 to 0.8.3.
Change the download page to github.com.

Do not bump PORTREVISION because these modules disabled by default.

Update third-party ngx_postgres module from 0.8 to 0.9.
Also remove needless patch.

Do not bump PORTREVISION because these modules disabled by default.

<ChangeLog>

* Improve debug logging.
  From Yichun Zhang (agentzh).

* Fix compatibility with poll, select and /dev/poll event models.
  Reported by Yichun Zhang (agentzh).

* Fix compatibility with PostgreSQL 9.x.
  Reported by Yichun Zhang (agentzh).

(Only the first 15 lines of the commit message are shown above )

Add naxsi third-party module, version 0.42.
Move down checksums for devel_kit third-party module.
Do not bump PORTREVISION because these modules disabled by default.

PR:     162783

Update third-party cache_purge module from 1.4 to 1.5.

<ChangeLog>

  * Fix on-disk cache size calculation.
    Since the initial release, recorded on-disk cache size was
    decreased twice for purged content (once during cache purge
    and once during subsequent cache update).
    This resulted in recorded on-disk cache size being much
    smaller than in reality, which could lead to on-disk cache
    outgrowing defined "max_size" parameter.
    Patch from Pyry Hakulinen.

</ChangeLog>

Update from 1.0.10 to 1.0.11.
Remove needless patch.

<ChangeLog>

*) Change: now double quotes are encoded in an "echo" SSI-command
   output.
   Thanks to Zaur Abasmirzoev.

*) Feature: the "image_filter_sharpen" directive.

*) Bugfix: a segmentation fault might occur in a worker process if SNI
   was used; the bug had appeared in 1.0.9.

*) Bugfix: SIGWINCH signal did not work after first binary upgrade; the

(Only the first 15 lines of the commit message are shown above )

Add set-misc-nginx third-party module.

Remove DEVEL_KIT_MODULE from OPTIONS, because the devel_kit module
is used as a toolkit for other modules.

Add internal USE_NGINX_DEVEL_KIT variable.

Cleanup whitespaces.

Do not bump PORTREVISION because these modules disabled by default.

Feature safe:   yes

PR:             163148 (mostly)

Update from 3.0.9 to 3.0.11:
o) www/rubygem-passenger;       [*]
o) third-party passenger module for www/nginx and www/nginx-devel.

Feature safe:   yes

Approved by:    maintainer      [*]

Update third-party upstream_keepalive module from 0.4 to 0.7.
Do not bump PORTREVISION cause module is disabled by default.

Feature safe:   yes

PR:     162874

Fix installation path for perl module.
Bump PORTREVISION.

Feature safe:   yes

Problem found by:       Maxim Dounin <mdounin@mdounin.ru>

Update from 1.0.9 to 1.0.10.

Feature safe:    yes.

<ChangeLog>

*) Bugfix: a segmentation fault might occur in a worker process if
   resolver got a big DNS response.
   Thanks to Ben Hawkes.

*) Bugfix: in cache key calculation if internal MD5 implementation was
   used; the bug had appeared in 1.0.4.

*) Bugfix: the module ngx_http_mp4_module sent incorrect
   "Content-Length" response header line if the "start" argument was
   used.
   Thanks to Piotr Sikora.

</ChangeLog>

Add nginx-x-rid-header third-party module.

PR:             ports/162252
Submitted by:   mm

Update from 1.0.8 to 1.0.9.

<ChangeLog>

*) Change: now the 0x7F-0x1F characters are escaped as \xXX in an
   access_log.

*) Change: now SIGWINCH signal works only in daemon mode.

*) Feature: "proxy/fastcgi/scgi/uwsgi_ignore_headers" directives support
   the following additional values: X-Accel-Limit-Rate,
   X-Accel-Buffering, X-Accel-Charset.

*) Feature: decrease of memory consumption if SSL is used.

(Only the first 15 lines of the commit message are shown above )

Update third-party cache_purge module from 1.3 to 1.4.

Do not bump PORTREVISION.

<ChangeLog>

* Add AIO support.
  Requested by Emin Hasanov.

</ChangeLog>

Update from 1.0.7 to 1.0.8.

<ChangeLog>

*) Bugfix: nginx could not be built --with-http_mp4_module and without
   --with-debug option.

</ChangeLog>

Update from 1.0.6 to 1.0.7.

Original http_mp4 and third-party http_mp4_h268 modules are
incompatible, add note about.

<ChangeLog>

*) Change: now if total size of all ranges is greater than source
   response size, then nginx disables ranges and returns just the source
   response.

*) Feature: the "max_ranges" directive.

*) Feature: the module ngx_http_mp4_module.

(Only the first 15 lines of the commit message are shown above )

Update third-party http_redis module from 0.3.4 to 0.3.5.
Update third-party http_gunzip_filter module from 0.3 to 0.4.

Do not bump PORTREVISION because these third-party modules are
disabled by default.

<ChangeLog>

Changes with http_redis 0.3.5

*) Feature: add test for not set $redis_db directive.

*) Feature: keep-alive support merged from original
   memcached module 1.1.4.

Changes with http_gunzip 0.4

*) Feature: support for nginx 1.1.4.

</ChangeLog>

- Chase devel/google-perftools shlib bump
- security/tor*: add -L${LOCALBASE}/lib to LDFLAGS (fixes linking)

Approved by:    miwi, wen (mentors implicit)

Update from 3.0.8 to 3.0.9:

o) www/rubygem-passenger; [1]
o) passenger support for www/nginx and www/nginx-devel;

Remove needless patch.

Do not bump PORTREVISION because passenger third-party module
disabled by default.

Approved by:    maintainer [1]

Update third-party lua module from 0.2 to 0.3.

Bump PORTREVISION is unnecessary, because the module is
disabled by default.

Update from 1.0.5 to 1.0.6.

<ChangeLog>

*) Feature: cache loader run time decrease.

*) Feature: loading time decrease of configuration with large number of
   HTTPS sites.

*) Feature: now nginx supports ECDHE key exchange ciphers.
   Thanks to Adrian Kotelba.

*) Feature: the "lingering_close" directive.

*) Feature: now shared zones and caches use POSIX semaphores on Solaris.

(Only the first 15 lines of the commit message are shown above )

Update third-party module ngx_http_redis from 0.3.3 to 0.3.4.

<ChangeLog>

*) Change: better error messages diagnostics in select phase.

*) Add more comments in source code.

*) Bugfix: fix interaction with redis if redis_db was unused.
   Found by Sergey Makarov.
   Thanks to Igor Sysoev.

*) Feature: add test suite for redis backend.
   Thanks to Maxim Dounin.

</ChangeLog>

Do not bump PORTREVISION.

Downgrade from latest development version 1.1.0 to latest
stable version 1.0.5.

Bump PORTEPOCH.

Update from 3.0.7 to 3.0.8:

1) www/rubygem-passenger;

2) passenger support for www/nginx and www/nginx-devel;

Also add patch for fix NULL pointer crash that occurs when
HTTP 1.0 Host header isn't given, obtained from passenger's
upstream.

Approved by:    maintainer [1]

Update from 1.0.5 to 1.1.0.

<ChangeLog>

*) Feature: cache loader run time decrease.

*) Feature: "loader_files", "loader_sleep", and "loader_threshold"
   options of the "proxy/fastcgi/scgi/uwsgi_cache_path" directives.

*) Feature: loading time decrease of configuration with large number of
   HTTPS sites.

*) Feature: now nginx supports ECDHE key exchange ciphers.
   Thanks to Adrian Kotelba.

(Only the first 15 lines of the commit message are shown above )

Add one more third-party module nginx-gridfs 0.8 - module to serve content
directly from MongoDB's GridFS.

Update nginx_redis2 module from 0.7rc5 to 0.7.

Fix compile mod_zip module.

Move down CHUNKIN_MODULE in OPTIONS.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Update from 1.0.4 to 1.0.5.

Fix third-party accept_language fetch by moving to github.

<ChangeLog>

*) Change: now default SSL ciphers are "HIGH:!aNULL:!MD5".
   Thanks to Rob Stradling.

*) Feature: the "referer_hash_max_size" and "referer_hash_bucket_size"
   directives.
   Thanks to Witold Filipczyk.

*) Feature: $uid_reset variable.

(Only the first 15 lines of the commit message are shown above )

Add two more third-party modules:

o) chunkin-nginx-module - HTTP 1.1 chunked-encoding request body support;
o) xss-nginx-module - native cross-site scripting support in nginx.

Update nginx_eval_module to the latest version 1.0.3, move MASTER_SITES
to github.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Add one more third-party module:

o) ngx_postgres-0.8 - upstream module that allows nginx to
   communicate directly with PostgreSQL database.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Add 3 third-party modules:

o) ngx_devel_kit - module that is designed to extend the core
   functionality of nginx;
o) ngx_lua - embed the power of lua into nginx;
o) ngx_redis2 - upstream module for the Redis database 2.0 protocol.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Add third-party module srcache-0.12.

Use more or less canonical name for github.com MASTER_SITES.
Fix fetch for third-party module memc.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Update third-party modules:

o) echo from 0.34 to 0.36;
o) headers_more from 0.14 to 0.15;
o) memc from 0.11 to 0.12.

Change default MASTER_SITES for these modules from MASTER_SITE_LOCAL
to http://download.github.com/.

Fix whitespaces.

Bump PORTREVISION is unnecessary, because these modules are
disabled by default.

Update third party nginx_substitutions_filter from 0.5.2 revision 44 to
0.5.2 revision 45.

Do not bump PORTREVISION.

Update third party ngx_http_redis module from 0.3.2 to 0.3.3.

Do not bump PORTREVISION.

<ChangeLog>

*) Bugfix: fix interaction with redis if redis_db was used.
   Also, compile with -Werror now is possible.

</ChangeLog>

Update from 1.0.3 to 1.0.4.

<ChangeLog>

*) Change: now regular expressions case sensitivity in the "map"
   directive is given by prefixes "~" or "~*".

*) Feature: now shared zones and caches use POSIX semaphores on Linux.
   Thanks to Denis F. Latypoff.

*) Bugfix: "stalled" cache updating" alert.

*) Bugfix: nginx could not be built --without-http_auth_basic_module;
   the bug had appeared in 1.0.3.

</ChangeLog>

Update from 1.0.2 to 1.0.3.

<ChangeLog>

*) Feature: the "auth_basic_user_file" directive supports "$apr1",
   "{PLAIN}", and "{SSHA}" password encryption methods.
   Thanks to Maxim Dounin.

*) Feature: the "geoip_org" directive and $geoip_org variable.
   Thanks to Alexander Uskov, Arnaud Granal, and Denis F. Latypoff.

*) Feature: ngx_http_geo_module and ngx_http_geoip_module support IPv4
   addresses mapped to IPv6 addresses.

*) Bugfix: a segmentation fault occurred in a worker process during
   testing IPv4 address mapped to IPv6 address, if access or deny rules
   were defined only for IPv6; the bug had appeared in 0.8.22.

*) Bugfix: a cached reponse may be broken if proxy/fastcgi/scgi/
   uwsgi_cache_bypass and proxy/fastcgi/scgi/uwsgi_no_cache directive
   values were different; the bug had appeared in 0.8.46.

</ChangeLog>

Update from 1.0.1 to 1.0.2.

<ChangeLog>

*) Feature: now shared zones and caches use POSIX semaphores.

*) Bugfix: in the "rotate" parameter of the "image_filter" directive.
   Thanks to Adam Bocim.

*) Bugfix: nginx could not be built on Solaris; the bug had appeared in
   1.0.1.

</ChangeLog>

Update from 1.0.0 to 1.0.1.
Update CONFLICTS.

Also update third party modules:
o) ngx_cache_purge from 1.2 to 1.3;
o) ngx_slowfs_cache from 1.5 to 1.6.

<ChangeLog>

*) Change: now the "split_clients" directive uses MurmurHash2 algorithm
   because of better distribution.
   Thanks to Oleg Mamontov.

*) Change: now long strings starting with zero are not considered as
   false values.

(Only the first 15 lines of the commit message are shown above )

Update third party upstream keepalive module from 0.3 to 0.4.

Do not bump PORTREVISION.

<ChangeLog>

*) Bugfix: the "[alert] ... open socket ... left in connection ..."
   messages were logged on nginx worker process gracefull exit for
   each cached connection; the bug had appeared in 0.3.

</ChangeLog>

Update from 3.0.6 to 3.0.7:

1) www/rubygem-passenger;

2) passenger support for www/nginx and www/nginx-devel;
   update passenger's version for patches.

3) for speed-up rails applications build passenger without
   debugging information by default.  Otherwise WITH_DEBUG
   required.

Approved by:    maintainer [1,3]

Update to latest stable version 1.0.0.

For speed-up rails applications don't build debugging information for
passenger module by default.  Otherwise WITH_DEBUG required.

Remove needless nginx.8 for www/nginx, now its in the distro.

<ChangeLog>

*) Bugfix: a cache manager might hog CPU after reload.
   Thanks to Maxim Dounin.

*) Bugfix: an "image_filter crop" directive worked incorrectly coupled
   with an "image_filter rotate 180" directive.

*) Bugfix: a "satisfy any" directive disabled custom 401 error page.

</ChangeLog>

Add third-party http_subs_filter module.
Do not bump PORTREVISION.

PR:     156163

Update third-party fancyindex module from 0.3 to 0.3.1.

Do not bump PORTREVISIONs.

Update from 3.0.5 to 3.0.6:

o) www/rubygem-passenger; [*]
o) passenger support for www/nginx and www/nginx-devel.

More accurate for detect dependence of nginx ports. [*]

Approved by:    maintainer [*]

Switch IPv6 support on by default.

Bump PORTREVISIONs.

Spotted by:     tom

Update from 3.0.4 to 3.0.5:

o) www/rubygem-passenger; (1)
o) passenger support for www/nginx and www/nginx-devel. (2)

Adopt passenger's version update for extra patches.

Update preferred nginx version (1).
Do not bump PORTREVISIONs. (2)

Approved by:    Jacob Atzen <jatzen@gmail.com> (maintainer) (1)

Update from 3.0.3 to 3.0.4:

o) www/rubygem-passenger; (1)
o) passenger support for www/nginx and www/nginx-devel. (2)

Adopt passenger's version update for extra patches.

Do not bump PORTREVISIONs. (2)

Approved by:    Jacob Atzen <jatzen@gmail.com> (maintainer) (1)

- Chase devel/google-perftools shlib bump

Update from 3.0.2 to 3.0.3:

o) www/rubygem-passenger; (1)
o) passenger support for www/nginx and www/nginx-devel. (2)

Adopt passenger's version update for extra patches.

Do not bump PORTREVISIONs. (2)

Approved by:    Jacob Atzen <jatzen@gmail.com> (maintainer) (1)

Update third-party headers_more module from 0.13 to 0.14.

Do not bump PORTREVISIONs.

Feature safe:   yes

Update third-party headers_more module from 0.10 to 0.13.

Do not bump PORTREVISIONs.

Update third-party modules:

o) uploadprogress from 0.8 to 0.8.2;
o) echo from 0.30 to 0.34;

Do not bump PORTREVISIONs.

Update from 3.0.1 to 3.0.2:

o) www/rubygem-passenger; [*]
o) passenger support for www/nginx and www/nginx-devel.

Remove needless extra patches.

Approved by:    maintainer [*]

Update from 0.8.53 to 0.8.54.

<ChangeLog>

*) Bugfix: if there was a single server for given IPv6 address:port
   pair, then captures in regular expressions in a "server_name"
   directive did not work.

*) Bugfix: a segmentation fault might occur in a worker process, if the
   "auth_basic" directive was used.
   Thanks to Michail Laletin.

*) Bugfix: compatibility with ngx_http_eval_module; the bug had
   appeared in 0.8.42.

</ChangeLog>

Add third-party syslog support, original patch obtained from
http://dl.dropbox.com/u/5836407/Patches/Nginx_0.8.49-syslog-support.txt.

Do not bump PORTREVISIONs.

Submitted by:   Anes Muhametov aka anes at anes dot su
PR:             ports/152920

Update passenger as well as support for passenger-specific ports
from 3.0.0 to 3.0.1.

Also:

 o) respect CC/CXX/CFLAGS/PTHREAD_LIBS flags;
 o) build depends against devel/libev instead of internal libev;
 o) change depends from curl binary to libcurl;
 o) revert back GEM_LIB_DIR for pkg-message.    (!)

Do not bump PORTREVISIONs for www/nginx and www/nginx-devel ports.

<Note>

Patch extra-patch-passenger::ext::common::Utils.cpp obtained from
passenger's git:
https://github.com/FooBarWidget/passenger/commit/9a811060db56cfad2e2056d90cac1a354870dbad
and should be remove in next [3.0.2] port update.

</Note>

Approved by:    maintainer [*]
Pointy hat to:  wen (!)

Add support for passenger 3.0.0.

<Note>

www/nginx and www/nginx-devel build support for nginx only.
For full support www/rubygem-passenger port compiled with
option WITH_NGINXPORT should be installed.

</Note>

Do not bump PORTREVISIONs.

Add nginx(8).
Bump PORTREVISION.

Thanks to:
o) Maxim Dounin aka mdounin at mdounin dot ru
o) Ruslan Ermilov aka ru@

Spotted by:     Sergey Svishchev aka svs at ropnet dot ru
PR:             ports/152212

Accordingly (www/nginx and www/nginx-devel):
*) update third-party http_auth_pam module from 1.1 to 1.2.
*) remove MD5.

Do not bump PORTREVISIONs.

Accordingly (www/nginx and www/nginx-devel):

*) update third party memc module from 0.08 to 0.11;
*) remove third party passenger module, since it possible to run as
   standalone server.

Update from 0.8.52 to 0.8.53.
Update third-party fancyindex module from 0.2.5 to 0.3.

<ChangeLog>

*) Feature: now the "error_page" directive allows to change a status
   code in a redirect.

*) Feature: the "gzip_disable" directive supports special "degradation"
   mask.

*) Bugfix: a socket leak might occurred if file AIO was used.
   Thanks to Maxim Dounin.

*) Bugfix: if the first server had no "listen" directive and there was
   no explicit default server, then a next server with a "listen"
   directive became the default server; the bug had appeared in 0.8.21.

</ChangeLog>

Update from 0.8.51 to 0.8.52.

<ChangeLog>

*) Bugfix: nginx used SSL mode for a listen socket if any listen option
   was set; the bug had appeared in 0.8.51.

</ChangeLog>

Update from 0.7.67 to latest stable version 0.8.51 by merge changes from
www/nginx-devel.

Update CONFLIGS and temporary mark IGNORE www/nginx-devel, because latest
version available from www/nginx.

<Announcement>

Now the 0.8.x branch becomes a stable branch.  The new features have been
appeared during 0.8 development:

o named regular expression captures;
o file AIO in FreeBSD and Linux;
o SSL CRL;
o SCGI and uwsgi modules.

</Announcement>

Accordingly update third party upload module from 2.0.12 to 2.2.0.
Do not bump PORTREVISIONs.

<ChangeLog>

*) Added feature: resumable uploads.
*) Added feature: allow to use of $variables in "upload_pass"
   directive (Piotr Sikora).
*) Added feature: allow module's directives inside if
   statements (David Backeus).
*) Added feature: directive upload_tame_arrays and ability to
   do some magic with php arrays.

</ChangeLog>

Accordingly update third party upstream_keepalive from 0.2 to 0.3.
Do not bump PORTREVISIONs.

<ChangeLog>

*) Bugfix: cached connections might be closed needlessly.
   Thanks to Martin Fjordvald.

*) Bugfix: in memory allocation error handling on config creation.

</ChangeLog>

This commit is dedicate to my sister's birthday.

Accordingly update third party mod_zip from 1.1.5 to 1.1.6.
Do not bump PORTREVISIONs.

<ChangeLog>

*) Feature: Support for UTF-8 filenames. Thanks to Robbie Scott/Bandcamp.

*) Feature: Issue subrequests serially. Thanks to Brian Moran/OneHub.

*) Feature: Use Zip64 when archive is larger than 4 GB. Thanks to Vasily
   Fedoseyev.

*) Bugfix: Support spaces in URLs.

</ChangeLog>

Install three plain configuration files with -dist prefix.
Do not remove fastcgi_params configuration file, which may carefully
edited by the user.

Sync DEBUG knob description with www/nginx-devel.

Bump PORTREVISION.

Number of commits found: 329 (showing only 100 on this page)

1 | 2 | 3 | 4  »  

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities