FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Port details
p5-LWP-ConnCache-MaxKeepAliveRequests Connection cache that enforces a max keep alive limit
0.33_1 www on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: perl@FreeBSD.org search for ports maintained by this maintainer
Port Added: 04 Feb 2009 14:41:00
Also Listed In: perl5
License: not specified in port
LWP::UserAgent is the default module for issuing HTTP requests from
Perl. It has a keep_alive setting which by default allows unlimited
requests to the same server. Some servers will disconnect you after
a limited number of requests (in Apache 2 this is achieved with the
MaxKeepAliveRequests directive). This module allows you to limit
the maximum number of keep alive requests to a server.

WWW:     http://search.cpan.org/dist/LWP-ConnCache-MaxKeepAliveRequests/
SVNWeb : Homepage : PortsMon

To install the port: cd /usr/ports/www/p5-LWP-ConnCache-MaxKeepAliveRequests/ && make install clean
To add the package: pkg install p5-LWP-ConnCache-MaxKeepAliveRequests

PKGNAME: p5-LWP-ConnCache-MaxKeepAliveRequests

distinfo:

SHA256 (LWP-ConnCache-MaxKeepAliveRequests-0.33.tar.gz) = f49f5657ea3009d0eb643f1bb02cff53fec6a7fb0c1e0bfde0cee9e6b4ed69f1
SIZE (LWP-ConnCache-MaxKeepAliveRequests-0.33.tar.gz) = 2168


NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. p5-libwww>=0 : www/p5-libwww
  2. p5-Moose>=0 : devel/p5-Moose
  3. perl5>=5.20<5.21 : lang/perl5.20
Runtime dependencies:
  1. p5-libwww>=0 : www/p5-libwww
  2. p5-Moose>=0 : devel/p5-Moose
  3. perl5>=5.20<5.21 : lang/perl5.20

This port is required by:

for Build for Run * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/LWP/
  2. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/LWP/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/LWP/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/LWP/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/modules/by-module/LWP/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/LWP/
  8. http://backpan.perl.org/modules/by-module/LWP/
  9. http://cpan.metacpan.org/modules/by-module/
  10. http://cpan.metacpan.org/modules/by-module/LWP/
  11. http://ftp.jaist.ac.jp/pub/CPAN/modules/by-module/LWP/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/LWP/
  13. http://www.cpan.dk/modules/by-module/LWP/
  14. http://www.cpan.org/modules/by-module/LWP/

Number of commits found: 12

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
01 Apr 2016 14:33:58
Original commit files touched by this commit  0.33_1
Revision:412351
mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight
26 Nov 2014 13:08:38
Original commit files touched by this commit  0.33_1
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
05 Jan 2014 12:20:03
Original commit files touched by this commit  0.33
Revision:338754
az search for other commits by this committer
- stage support

Approved by:	portmgr (blanket infrastructure)
16 Dec 2013 18:24:49
Original commit files touched by this commit  0.33
Revision:336656
glarkin search for other commits by this committer
[Errno 11] Resource Temporarily Unavailable

Reassigning my ports back to the pool with the hope of freeing up
to do more FreeBSD work in the future.

Submitted by:	glarkin
20 Sep 2013 23:36:54
Original commit files touched by this commit  0.33
Revision:327776
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
www)
03 Sep 2013 12:27:09
Original commit files touched by this commit  0.33
Revision:326139
az search for other commits by this committer
- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)
10 Jun 2012 18:42:48
Original commit files touched by this commit  0.33
swills search for other commits by this committer
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)
17 Mar 2012 22:42:01
Original commit files touched by this commit  0.33
swills search for other commits by this committer
- Update to 0.33

PR:             ports/165823
Approved by:    glarkin (maintainer)
Feature safe:   yes
19 Mar 2011 12:38:54
Original commit files touched by this commit  0.32
miwi search for other commits by this committer
- Get Rid MD5 support
14 May 2009 19:30:58
Original commit files touched by this commit  0.32
glarkin search for other commits by this committer
- Fixed incorrect WWW: tag
14 Mar 2009 18:40:05
Original commit files touched by this commit  0.32
skv search for other commits by this committer
Fix packaging on perl 5.10
04 Feb 2009 14:04:17
Original commit files touched by this commit  0.32
glarkin search for other commits by this committer
LWP::UserAgent is the default module for issuing HTTP requests from
Perl. It has a keep_alive setting which by default allows unlimited
requests to the same server. Some servers will disconnect you after
a limited number of requests (in Apache 2 this is achieved with the
MaxKeepAliveRequests directive). This module allows you to limit
the maximum number of keep alive requests to a server.

WWW:     http://search.cpan.org/dist/LWP-UserAgent-Determined/

Number of commits found: 12

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
linux-c6-openssl*Sep 30
openssl*Sep 30
openssl-devel*Sep 30
bind9-develSep 28
bind910Sep 28
bind911Sep 28
bind99Sep 28
libresslSep 26
libressl-develSep 26
opensslSep 26
openssl-develSep 26
irssi*Sep 22
irssi*Sep 22
firefoxSep 20
firefox*Sep 20

7 vulnerabilities affecting 32 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 26279
Broken 371
Deprecated 211
Ignore 635
Forbidden 0
Restricted 199
No CDROM 83
Vulnerable 61
Expired 24
Set to expire 197
Interactive 0
new 24 hours 6
new 48 hours10
new 7 days35
new fortnight68
new month122

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.