19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

20:51 Yuri Victorovich (yuri) 

databases/pymongo: Move to databases/py-pymongo

Approved by:	portmgr (compliance)

    95e2a2c

12:51 Olivier Cochard (olivier) 

www/py-bottle-cork: Fix stale WWW entry

Reported by:	se

    4ecd73e

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

09:45 olivier 

Fix distfile fetch and while here improve portlint.

 

16:26 antoine 

Mark a few ports BROKEN (unfetchable)

 

04:41 tobik 

www/py-bottle-cork: Fix options

Options helpers are ineffective when set after bsd.port.options.mk.
Convert the port to options helpers to fix this.

Reported by:	tobik (in D19553)

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

13:15 mat 

Add PY_FLAVOR to Python module dependencies.

Sponsored by:	Absolight

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

13:42 olivier 

Update sqlalchemy dependency

PR:		215223
Submitted by:	rene
Approved by:	tabthorpe
Differential Revision:	https://reviews.freebsd.org/D8799

 

10:52 matthew 

Reorganise and modernise the py-sqlalchemy ports.

 - Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches.
 - Deprecate the ports for the 0.6 and 0.7 release branches, as these
   have been declared EoL and are no longer supported by upstream.
 - Update to the latest available version in each branch.

In detail:

   Port                 Version Maintainer
   ----------------------------------------------
   py-sqlalchemy06      0.6.9   nivit@FreeBSD.org (Deprecate 2016-08-20) [1]
   py-sqlalchemy07      0.7.10  nivit@FreeBSD.org (renamed py-sqlalchemy,
Deprecate 2016-08-20) [1]
   py-sqlalchemy08      0.8.7   nivit@FreeBSD.org (renamed py-sqlalchemy-devel)
[1]
   py-sqlalchemy09      0.9.10  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]
   py-sqlalchemy10      1.0.13  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]

 - Use options-helpers and option dependent make targets.
 - Use autoplist for documents as well as python code
 - Add all the docments to the packages: previously an arbitrary
   subset was added in a way that excluded CSS, images and other HTML
   assets.
 - Use TEST_DEPENDS and add a TEST_TARGET instead of having a 'TEST'
   option.
 - Use py-pytest for 0.9.x and later, rather than py-nose.
 - Add CONFLICTS_INSTALL between all of the py-sqlalchemyXY ports.

PR:		191442
Submitted by:	robak
Reviewed by:	robak
Reviewed by:	pi
Approved by:	nivit (maintainer timeout, ~300days) [1]
Approved by:    m.tsatsenko@gmail.com (maintainer) [2]
Sponsored by:	https://reviews.freebsd.org/D908

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

08:58 olivier 

Update to 0.12.0

Approved by:	jadawin
Differential Revision:	https://reviews.freebsd.org/D5401

 

10:42 olivier 

Update my email for ports I maintain

Approved by:	jadawin
Differential Revision:	https://reviews.freebsd.org/D5309

 

20:24 mat 

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

 

16:44 bdrewery 

Update USE_GITHUB so it does not require GH_COMMIT.

Using this new scheme allows only setting the _tag_ or _commit hash_ in
GH_TAGNAME and not having to know the hash for a tag.  This scheme will
download a tarball that has a different checksum than before due to a changed
directory name for extraction.

The following MASTER_SITES are provided to retain the old checksum and
directory structure (that require GH_COMMIT):
  GH -> GHL
  GITHUB -> GITHUB_LEGACY

Differential Revision:	https://reviews.freebsd.org/D748
Submitted by:	amdmi3
Reviewed by:	mat, swills, antoine, bdrewery
With hat:	portmgr

 

11:51 marino 

Add new port www/py-bottle-cork

PR:		194192
Submitted by:	Olivier (cochard.me)

bottle-cork provides a simple set of methods to implement Authentication
and Authorization in web applications based on Bottle.