16:36 Muhammad Moinur Rahman (bofh) 

www/yaws: Moved man to share/man

Approved by:    portmgr (blanket)

    327e831

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

21:00 Dave Cottlehuber (dch) 

www/yaws: update to 2.1.0

Reported by:	Peggy Wilkins <mozart@lib.uchicago.edu>

    0db2fec

19:50 Bernhard Froehlich (decke) 

www/yaws: Add CPE information

Approved by:	portmgr (blanket)

    c5629c7

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

13:00 olgeni 

Update www/yaws to version 2.0.6.

 

13:43 olgeni 

Transfer more Erlang ports to erlang@.

 

14:45 olgeni 

Update www/yaws to version 2.0.5.

 

15:21 mat 

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

 

13:03 olgeni 

Update www/yaws to version 2.0.4.

 

23:40 olgeni 

Update www/yaws version 2.0.3.

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

09:53 olgeni 

Upgrade www/yaws to version 2.0.2.

 

12:36 olgeni 

Upgrade www/yaws to version 2.0.1.

 

17:23 olgeni 

Upgrade to version 2.0.

 

13:41 olgeni 

Set the default yaws_enable to NO.

 

09:12 olgeni 

Do not let the build hostname creep into the sample configuration file.

 

15:40 olgeni 

Upgrade to version 1.99.

 

20:24 mat 

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

 

16:47 antoine 

Cleanup plist

 

15:35 olgeni 

- Remove redundant MASTER_SITES
- Replace USE_GMAKE with USES
- Fix COMMENT
- Fix USE_AUTOTOOLS assignment

Submitted by:	danfe

 

11:16 olgeni 

- Upgrade to version 1.98
- Switch to github

 

19:27 olgeni 

- Upgrade to version 1.97.
- Add staging support.
- Fix sample configuration file.

 

23:36 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

 

14:53 olgeni 

Remove symbolic link from yaws-1.96 to yaws.

It caused "rebar generate" invocations to fail when Yaws was included,
due to duplicate application directories with the same version.

Also, add devel to CATEGORIES.

 

22:48 olgeni 

- Upgrade to version 1.96.
- Following r312864, remove ONLY_FOR_ARCHS.

 

14:50 olgeni 

Convert Makefile headers to the new format in my ports.

 

22:08 olgeni 

Fix handling of source paths containing tilde characters in
yaws_compile.erl.

Already patched upstream on github as klacke/yaws/25b8e4c.

Feature safe:	yes

 

20:42 olgeni 

Upgrade to version 1.95.

Feature safe:	yes

 

15:33 olgeni 

Replace spaces with tabs in assignments.

20:02 olgeni 

Compatibility fixes for Erlang R15B01.

Specifically, on R15B01 the sendfile function does not require a
separate port driver.

16:39 olgeni 

Convert to OptionsNG.

16:32 olgeni 

Pet portlint and fix ${FIND} expression.

16:39 olgeni 

Upgrade to version 1.94, which includes an improved security patch.

01:10 olgeni 

Upgrade to version 1.93, which contains a security fix among other changes.

From Erlyaws-list:

"Use crypto:rand_bytes() instead of the cryptographically weak random
module. Swedish security consultant and cryptographer Kalle
Zetterlund discovered a way to - given a sequence of cookies produced
by yaws_session_server - predict the next session id. Thus providing
a gaping security hole into yaws servers that use the yaws_session_server
to maintain cookie based HTTP sessions (klacke/kallez)"

PR:             ports/169363
Submitted by:   Kenji Rikitake <kenji.rikitake@acm.org>

21:51 olgeni 

Upgrade to version 1.92.

22:17 olgeni 

Upgrade to version 1.91.

Submitted by:   Kenji Rikitake <kenji.rikitake acm org>

09:00 olgeni 

Chase checksum change.

A few minor fixes were merged upstream, including handling of delayed redirects.

21:05 olgeni 

Upgrade to version 1.90.

20:18 olgeni 

Upgrade to version 1.89.

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

16:30 olgeni 

Upgrade to version 1.88.

11:46 dinoex 

- update to jpeg-8

11:20 olgeni 

Upgrade to version 1.87.

14:34 olgeni 

Upgrade to version 1.86.

13:34 olgeni 

Upgrade to version 1.85.

11:01 olgeni 

Upgrade to version 1.84.

11:54 olgeni 

Upgrade to version 1.83 (and use WWWDIR in Makefile).

Add warning about the new configuration file path.

11:02 olgeni 

Force rebuild with R13B01.

14:08 olgeni 

Upgrade to version 1.82.

11:30 olgeni 

Upgrade to version 1.81.

11:15 olgeni 

Upgrade to version 1.80.

21:32 olgeni 

Optionally allow users to disable the native sendfile(2) interface.

This is needed if you are cross-compiling to win32 and need yaws to be a pure
Erlang application.

21:12 olgeni 

Upgrade to version 1.79.

00:03 olgeni 

Force rebuild with R12B-5.

16:10 olgeni 

Upgrade to version 1.77.

23:41 olgeni 

Bump PORTREVISION to rebuild with new Erlang/OTP release.
Sync ONLY_FOR_ARCHS with the main Erlang port.

14:07 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

12:03 olgeni 

Upgrade to version 1.76.

22:41 olgeni 

Upgrade to version 1.75.

22:03 olgeni 

Upgrade to version 1.73.

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

20:28 olgeni 

Upgrade to version 1.68.

10:27 olgeni 

Upgrade to version 1.66.

15:57 olgeni 

Upgrade to version 1.65.

19:39 olgeni 

Enable debug info to make OTP's xref(3) module work.

13:59 olgeni 

Upgrade to version 1.64.

13:49 olgeni 

Upgrade to version 1.61.

08:28 ade 

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

18:48 olgeni 

Upgrade to the final 1.58 release (this enables PAM support.)

20:43 olgeni 

Upgrade to version 1.58.

10:26 olgeni 

Upgrade to version 1.57.

21:48 olgeni 

Upgrade to version 1.56.

09:15 olgeni 

Upgrade to version 1.54.

10:36 olgeni 

? LOG
Index: Makefile
===================================================================
RCS file: /home/pcvs/ports/www/yaws/Makefile,v
retrieving revision 1.19
diff -u -r1.19 Makefile
--- Makefile    20 Feb 2005 15:46:58 -0000      1.19
+++ Makefile    19 Mar 2005 10:32:50 -0000
@@ -7,6 +7,7 @@

 PORTNAME=      yaws
 PORTVERSION=   1.53
+PORTREVISION=  1
 CATEGORIES=    www
 MASTER_SITES=  http://yaws.hyber.org/download/
Do not trigger a crash report when the server process exits using
the exit function.

15:46 olgeni 

Upgrade to version 1.53.

15:05 olgeni 

Upgrade to version 1.51.

09:41 olgeni 

Upgrade to version 1.49.

10:59 olgeni 

Add symlink for easier dependency specification.

15:58 olgeni 

Unbreak embedded mode.

09:01 olgeni 

Upgrade to version 1.48.

14:50 olgeni 

Upgrade to version 1.47.

15:44 olgeni 

Add missing header file to source directory.

10:56 olgeni 

Also install source, to aid debugging of embedded applications (as other
otp applications do).

22:39 olgeni 

Move OTP application to ${PREFIX}/lib/erlang/lib, so it is easier to build
releases without adding paths by hand.

12:55 olgeni 

* The startup script used to pull in a local path from ${WRKSRC}, so
the daemon would not start after "make clean" (!).

* Do not create empty EXAMPLESDIR.

13:59 olgeni 

Remove verbose option from cpio call.

13:53 olgeni 

Upgrade to version 1.45 (remove MASTER_SITE_SOURCEFORGE which has
1.41 only).

21:41 olgeni 

Remove USE_SIZE now that it's used by default.

09:19 kris 

BROKEN on !i386: Does not compile

12:11 olgeni 

Upgrade to 1.41 and USE_SIZE.

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

21:47 olgeni 

Also remove .bak files after patching.

17:06 olgeni 

Add Yaws, a webserver for dynamic content written in Erlang.