non port: x11-toolkits/gtksourceview/Makefile |
Number of commits found: 59 |
Monday, 26 Mar 2018
|
12:38 bapt
Make libgnome and libgnomeui not implying esound dependency
It has been a while both does not depend anymore on esound, before this change
esound dependency was wrongly added to plenty of packages which actually does
not depend on it.
While here:
- audio/glame: remove esound support
- games/monkeybubble: add an explicit dependency on esound
- sysutils/gnome-schedule: add en explicit dependency on pkg-config
- comms/kb: add missing dependency on pkgconfig
- x11-toolkits/libgnomeui:
* update to 2.4.5
* use USES=localbase
|
Thursday, 8 Dec 2016
|
17:17 tijl
Remove libart_lgpl_2.so.5 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
Thursday, 15 Jan 2015
|
17:17 kwm
Sprinkle some PORTSCOUT macros around to either mark ports:
* ignore because there will not be any new releases.
* check specific versions or ignore devel versions.
|
Wednesday, 11 Jun 2014
|
14:50 tijl
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream. Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.
Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix. Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS. This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.
PR: 190592
Exp-run by: antoine
Approved by: portmgr (antoine)
|
Wednesday, 23 Apr 2014
|
13:25 tijl
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
|
Tuesday, 22 Apr 2014
|
10:35 bapt
Support stage
Modernize
|
Friday, 20 Sep 2013
|
23:57 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)
|
Tuesday, 3 Sep 2013
|
09:59 bapt
Add an explicit dependency on pkgconf
|
Wednesday, 24 Apr 2013
|
18:10 ak
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
Friday, 1 Jun 2012
|
05:26 dinoex
- update png to 1.5.10
|
Friday, 23 Sep 2011
|
22:26 amdmi3
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
Saturday, 4 Dec 2010
|
07:34 ade
Sync to new bsd.autotools.mk
|
Sunday, 28 Mar 2010
|
06:47 dinoex
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Friday, 5 Feb 2010
|
11:46 dinoex
- update to jpeg-8
|
Sunday, 2 Aug 2009
|
19:36 mezz
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Friday, 31 Jul 2009
|
13:57 dinoex
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Monday, 2 Feb 2009
|
01:36 araujo
- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
MASTER_SITE_SUBDIR when possible.
PR: ports/125243
Submitted by: pgollucci
Reworked by: myself
Tested on: pointyhat exp-run (pav)
|
Tuesday, 10 Jun 2008
|
04:57 marcus
Restore previous PORTREVISIONs that were decremented as part of the gettext
bump.
Reported by: iKris
|
Friday, 6 Jun 2008
|
14:16 edwin
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Saturday, 19 Apr 2008
|
17:56 miwi
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Wednesday, 24 Oct 2007
|
23:37 marcus
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).
The FreeBSD GNOME team would also like to thank our various testers and
contributors:
Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)
PRs fixed in this release:
111272, 113470, 115995, 116338
|
Saturday, 19 May 2007
|
20:32 flz
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Sunday, 11 Mar 2007
|
18:32 marcus
Update to 1.8.5.
|
Tuesday, 13 Feb 2007
|
05:25 mezz
Update to 1.8.4.
|
Wednesday, 10 Jan 2007
|
19:14 marcus
Update to 1.8.3.
|
Thursday, 14 Dec 2006
|
06:59 marcus
Update to 1.8.2.
|
Saturday, 14 Oct 2006
|
08:35 marcus
Presenting GNOME 2.16.1 for FreeBSD. This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.
On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE. This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed. The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily. We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.
Back to GNOME 2.16. This release brings a huge amount of new functionality
to FreeBSD. The standard release notes can be read at
http://www.gnome.org/start/2.16/ . But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD. This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.
But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:
Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>
Enjoy!
Approved by: portmgr (implicit, kris)
|
Saturday, 29 Jul 2006
|
19:19 marcus
Update to 1.6.2.
|
Wednesday, 31 May 2006
|
22:18 mezz
- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
for example:
Incorrect: (Without USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.local.dist <-- Here...
================================
Correct: (With USE_X_PREFIX)
================================
# cd /usr/ports/x11-toolkits/gtk20
# make -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist
# make PREFIX=/tmp/foo -V MTREE_FILE
/etc/mtree/BSD.x11-4.dist <-- Here...
================================
- Change a several of *-reference ports to install in LOCALBASE instead
X11BASE, but only two gtkmm*-reference couldn't be change at the moment.
Bump the PORTREVISION for change prefix.
Discussed with: marcus
|
Thursday, 11 May 2006
|
18:18 jylefort
Move the gtksourceview programming reference to the
gtksourceview-reference port.
|
Sunday, 30 Apr 2006
|
00:47 marcus
Presenting GNOME 2.14.1 for FreeBSD! Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>
|
Thursday, 23 Feb 2006
|
10:40 ade
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
Saturday, 5 Nov 2005
|
04:53 marcus
Presenting GNOME 2.12 for FreeBSD. The release is chock full of bug fixes
and new features. Don't believe me? Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.
DO NOT USE portupgrade by itself to upgrade to GNOME 2.12. Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh. This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.
In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen. The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>. His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.
The FreeBSD GNOME Team would lank to thank the following users for
their contributions to this release:
Matthew Luckie <mjl@luckie.org.nz>
ade
sajd on #freebsd-gnome
Caelian on #freebsd-gnome
mnag
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Mark Hobden <markhobden@gmail.com>
Sergey Akifyev <asa@agava.com>
Andreas Kohn
For more information on GNOME on FreeBSD, checkout
http://www.FreeBSD.org/gnome/. The 2.12 documentation will be
posted shortly.
|
Wednesday, 13 Jul 2005
|
21:22 mezz
Update to 1.2.1.
|
Saturday, 12 Mar 2005
|
10:54 marcus
Bump PORTREVISION to chase the glib20 shared lib version change.
|
Tuesday, 8 Mar 2005
|
11:56 kwm
Update to 1.2.0.
|
Tuesday, 1 Mar 2005
|
16:35 kwm
Update to 1.1.93.
|
Wednesday, 9 Feb 2005
|
03:51 marcus
Update to 1.1.92.
|
Tuesday, 25 Jan 2005
|
20:00 kwm
Update to 1.1.91.
Mainly bug fixes and translation updates.
|
Thursday, 13 Jan 2005
|
04:15 marcus
Update to 1.1.90.
|
Sunday, 7 Nov 2004
|
22:24 marcus
Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).
This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.
This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team. The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).
Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD. We would
especially like to thank those users that provided patches for GNOME 2.7 and
2.8:
Franz Klammer <klammer@webonaut.com>
Piotr Smyrak <piotr.smyrak@heron.pl>
Radek Kozlowski <radek@raadradd.com>
Khairil Yusof <kaeru@pd.jaring.my>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Vladimir Grebenschikov <vova@fbsd.ru>
GNOME 2.8 also features a new, FreeBSD-specific splashscreen that
was designed by jimmac for GNOME 2.8, then daemonized by
Franz Klammer <klammer@webonaut.com> and Radek Kozlowski
<radek@raadradd.com>.
As with GNOME 2.6, you cannot just "portupgrade" to GNOME 2.8. There is
a script provided at http://www.marcuscom.com/downloads/gnome_upgrade28.sh
that will aid in the upgrade process. Full documentation on the GNOME 2.8
upgrade is coming following this commit.
From all of us at FreeBSD GNOME, ENJOY!
|
Friday, 9 Jul 2004
|
17:43 marcus
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
Monday, 19 Apr 2004
|
07:03 marcus
Update to 1.0.1.
|
Monday, 5 Apr 2004
|
03:11 marcus
Presenting GNOME 2.6.0. The FreeBSD GNOME Team feels this our best release
ever. It fixes many bugs, and adds some features missing in previous
FreeBSD ports. To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:
http://www.freebsd.org/gnome/docs/faq26.html
Please read it carefully. GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:
http://www.marcuscom.com/tinderbox/
The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts. We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.
Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>
|
Sunday, 14 Mar 2004
|
06:17 ade
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
Monday, 1 Mar 2004
|
22:52 marcus
Update to 0.7.1.
|
Sunday, 22 Feb 2004
|
04:35 marcus
Last commit should also read:
Reported by: nork
|
04:35 marcus
Disable compiler warnings to fix the build after the recent GNU regex changes
in -CURRENT.
|
Wednesday, 4 Feb 2004
|
05:10 marcus
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
Monday, 17 Nov 2003
|
12:29 trevor
USE_REINPLACE need be defined only when REINPLACE_CMD is used.
|
Wednesday, 15 Oct 2003
|
23:36 adamw
Update to 0.7.0.
|
Tuesday, 26 Aug 2003
|
21:01 marcus
Update to 0.6.0.
|
Thursday, 7 Aug 2003
|
16:38 marcus
Update to 0.5.0.
|
Monday, 30 Jun 2003
|
16:57 marcus
Update to 0.4.0.
|
Wednesday, 18 Jun 2003
|
21:33 adamw
Add libgnomeprintui to USE_GNOME to fix build.
Reported by: kris
|
Friday, 13 Jun 2003
|
00:43 adamw
Update to 0.3.0.
|
Thursday, 12 Jun 2003
|
09:46 adamw
Remove REINPLACE commands that were rolled into gnomehack.
|
Thursday, 22 May 2003
|
16:47 marcus
Update to 0.2.1.
|
Thursday, 8 May 2003
|
00:34 marcus
Re-add gtksourceview under the x11-toolkits category. Gtksourceview is
an editor component that adds syntax highlighting support to the default
GtkTextView widget.
|
Number of commits found: 59 |