lesstif 0.95.2_2,2 x11-toolkits =10

API compatible clone of the Motif toolkit
Maintained by: dinoex@FreeBSD.org
Port Added: unknown
License: not specified in port

---

---

LessTif is a API compatible clone of the Motif toolkit.  Currently
LessTif is partially implemented with most of the API in place.
Both Motif 1.2 and Motif 2.0 libraries are built and installed.
By default, the 1.2 library is used because it is a more complete
implementation of the Motif 1.2 API.

The Hungry Programmers, the people writing LessTif, have adopted a
naming scheme where an even minor number indicates a stable release
of the libraries and an odd number is a development release. *Ports will
be made for even number releases only.*

WWW: http://www.lesstif.org/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: x11/xextproto, x11/libSM, x11/libICE, x11-toolkits/libXt, x11/libXp, x11/libXext, x11/libX11, x11/libXrender, x11-fonts/libXft, devel/automake, devel/autoconf, devel/libtool
Required To Run: x11/libSM, x11/libICE, x11-toolkits/libXt, x11/libXp, x11/libXext, x11/libX11, x11/libXrender, x11-fonts/libXft
Required Libraries: x11-fonts/fontconfig, print/freetype2
There are no ports dependent upon this port

---

To install the port: cd /usr/ports/x11-toolkits/lesstif/ && make install clean
To add the package: pkg_add -r lesstif

---

Configuration Options

     No options to configure

---

Master Sites:

http://heanet.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://sunet.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://iweb.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://switch.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://surfnet.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://kent.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://freefr.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://voxel.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://jaist.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://osdn.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://nchc.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://ncu.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://transact.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://softlayer.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://internode.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://ufpr.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

http://waix.dl.sourceforge.net/project/lesstif/lesstif/0.95.2/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Kick MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- remove obsolte patch, it was included upstream.

- Switch SourceForge ports to the new File Release System: categories starting
with X

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- use freetype2

- update to 0.95.2

- record xextproto as explicit dependency

- fix include for gcc43
Obtained from:  fedora.redhat.com

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- clean X11BASE

- set USE_XORG

Remove always-false/true conditions based on OSVERSION 500000

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

Update to the autotools new world order.

Tested by:      numerous package build runs
Approved by:    portmgr
Thanks to:      des, kris, linimon, pav

- use PACKAGE_BUILDING

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Convert to USE_LDCONFIG

Approved by:    dinoex (maintainer)

- take mainatinership

- unbreak package build
backout USE_LDCONFIG

Reported by: pointyhat
2006 Aug 28 06:08:20    lesstif-0.95.0,2.log            libdata/ldconfig/lesstif
2006 Aug 25 01:30:35    lesstif-0.95.0,2.log            libdata/ldconfig/lesstif
2006 Aug 23 10:13:56    lesstif-0.95.0,2.log            libdata/ldconfig/lesstif
http://pointyhat.freebsd.org/errorlogs/amd64-7-latest/lesstif-0.95.0,2.log

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

- udpate to 0.95.0
- switch to bzip2 copmressed source
- enable package on pointyhat

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Try to remove the aclocal19 directory, which we may have created.

- Style: ports@freebsd.org -> ports@FreeBSD.org

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- add SHA checksum

- Update to 0.94.4
http://www.lesstif.org/ReleaseNotes.html

- Update to 0.94.2
http://www.lesstif.org/ReleaseNotes.html

- catch up autoconf changes

- update to 0.94.0
xpdf works with this version again

- update libtool

- fix the automake update from ade

Kill off automake18, switching to automake19.  Requiem Mors Pacem.

- update to 0.93.97

- update to 0.93.96

- mark FORBIDDEN

- drop maintainership

- It was not forgotten, as no port package could be build!

- bump PORTEPOCH

Forgotten by:   dinoex

- backout incomplete update

- update to 0.93.95b

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Autotools cleanup.  Remove autoconf257 (259), automake17 (18), and
libtool14 (13/15).

PR:             67768
Submitted by:   ade
Approved by:    4-exp bento runs (thanks, kris!)

Sync with new bsd.autotools.mk

- unbreak autoconf

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Replace all known incantations of WANT_{AUTOMAKE,AUTOCONF,LIBTOOL}* with
the USE_<x> equivalents.  In the current scheme of things, the WANT_
variables in this case are synonymous with the USE_ ones, and thus need
to be exterminated.

First in a series of major autotools cleanups.

- add SIZE

- Update to 0.93.94
- Fix MASTER_SITES

- update MASTER_SITES

- add CONFLICTS
Submitted by:   eikemeier@fillmore-labs.com

- change ECHO -> ECHO_CMD

- save lib/X11/config/host.def (which is created empty by imake)
Thanks to kris for notice.

- retire pkg-comment

- add COMMENT

- make portlint happier

- Add documentation
- install motif 2.1 libs
- remove lib*.la files

- Update to 0.93.36
supports Motif1.2 and Motif2.1

Take maintainership, Update pending:
http://people.freebsd.org/~dinoex/ports/lesstif/

new MASTER_SITES
PR:             41940
Submitted by:   shammer@satanii.enemy.org

Style police: WWW tags should either end in a file/script or TRAILING /; Fix the
later case    

Unbroke.    

Replace explicit build dependency on automake with USE_AUTOMAKE knob    

Batch of style fixes for x11-toolkits.    

Revert maintainer to ports@freebsd.org.    

Convert category x11-toolkits to new layout.  

Update to 0.91.8. Other improvements:    

Update to version 0.91.4    

Do not remove lib/X11/config/Imake.tmpl on deinstall. Additional work should  
be done to save/restore original lib/X11/config/Imake.tmpl.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fourth round of INSTALLS_SHLIBS conversion.    

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities