09:07 antoine 

Deprecate ports broken for more than 6 months

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

19:30 antoine 

Mark BROKEN: fails to build

No wxWidgets build found
Compilation failed in require at ./Makefile.PL line 21.

Reported by:	pkg-fallout

 

12:47 bapt 

wxGTK3.0: switch to gtk3 and webkit2

Discussed with:	portmgr

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

13:06 des 

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

08:58 mat 

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

19:39 sunpoet 

Update to 0.9932

Changes:	http://search.cpan.org/dist/Wx/Changes

 

16:06 sunpoet 

Update to 0.9931

Changes:	http://search.cpan.org/dist/Wx/Changes

 

00:48 sunpoet 

Update to 0.9929

Changes:	http://search.cpan.org/dist/Wx/Changes

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

15:59 sunpoet 

Use real PORTVERSION and update dependent ports

- Sort PLIST

 

06:49 sunpoet 

- Remove outdated PERL_LEVEL check

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

06:41 pi 

x11-toolkits/p5-Wx: 0.99.27 -> 0.99.28

- also fix build error on 9.x

PR:		200309
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>

 

14:56 amdmi3 

- Remove useless WX_UNICODE
- Use BROKEN helper

Approved by:	portmgr blanket

 

12:04 mat 

Move p5- ports from ports@ to perl@.

With hat:	perl@
Sponsored by:	Absolight

 

20:53 amdmi3 

- Remove conditional dependency for outdated perl version
- Mark BROKEN on pre-10.x: even if it's made to build with some makefile hacks,
it still produces broken library because it doesn't respect LDFLAGS

 

22:16 mat 

Update to 0.99.27.

With hat:	perl@
Sponsored by:	Absolight

 

09:48 marino 

p5-Wx: Unbreak on some platforms

This port was using CFLAGS for c++, so the -std=c++11 flag wasn't getting
passed even when USE_CXXSTD was set.  This port broke in some places when
c++11 became a requirement of Wx.

This is still broken on FreeBSD 8 (F9 not tested) due to new problems
related to compiling with gcc48.

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

10:23 bapt 

Reset maintainership

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

12:27 bapt 

Update to 0.9923
Switch to use wxGTK 3.0

 

23:57 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

 

12:04 az 

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

 

17:12 bapt 

Remove unneeded USE_DISPLAY

 

07:30 az 

- Remove unnecessary depend on PERL_LEVEL < 5.12

PR:		ports/178915
Submitted by:	az
Approved by:	maintainer (timeout)

 

06:04 pclin 

- Update MAINTAINER email address for all my ports
- Convert Makefile header to new style if needed

Approved by:	swills (mentor)

 

21:52 swills 

- Update to 0.99.16
- Give maintainership to submitter
- Add LICENSE (ART10 and GPLv1)
- Rearrange section order, sort MAN3, cleanup TABs

PR:		ports/175445
Submitted by:	Po-Chien Lin <linpc@cs.nctu.edu.tw>

 

23:00 bapt 

Convert to new options framework

Feature safe:	yes

 

16:21 tabthorpe 

- Reassign to the heap at maintainer's request

Approved by:	portmgr (implicit)
Feature safe:	yes
Redports:	ignore

 

05:26 dinoex 

- update png to 1.5.10

17:40 eadler 

At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr

17:12 sylvio 

- Update to 0.97

PR:             Cezary Morga <cm@therek.net> (maintainer)

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

00:37 pgollucci 

- Update to 0.96 (fixes build)

Reported by:    pointyhat (via pav)

01:08 pgollucci 

- Update to 0.95

PR:             ports/142702
Submitted by:   myself (pgollucci@)
Approved by:    maintainer timeout (cm@therek.net; > 2 weeks)

06:06 miwi 

- Update to 0.94

PR:             140666
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

14:11 miwi 

- Update to 0.93

PR:             139183
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

23:20 lippe 

- Update to 0.92.

PR:             ports/138079
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

17:04 amdmi3 

- Mark MAKE_JOBS_UNSAFE

PR:             136792
Submitted by:   myself
Approved by:    Cezary Morga <cm@therek.net> (maintainer)

13:04 pav 

- Fix core-dump with malloc debug on

PR:             ports/136135
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

02:40 amdmi3 

- Update to 0.91

PR:             134721
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

22:53 miwi 

- Update to 0.90

PR:             134424
Submitted by:   Cezary Morga <cm@therek.net> (maintainer)

17:10 miwi 

wxPerl is an extension module allowing the creation of GUI (Graphical
User Interface) from Perl; it is built as a wrapper for the wxWidgets
C++ GUI toolkit.

WWW: http://wxperl.sourceforge.net/

PR:             ports/132406
Submitted by:   Cezary Morga <cm at therek.net>