05:23 Tobias C. Berner (tcberner) 

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
* xml: Add some missing DeviceEventController methods.
* Bind the AT-SPI bus to the graphical session.
* Mark bus service as belonging to the session slice.
* Add ATSPI_ROLE_PUSH_BUTTON_MENU.
* Add an "announcement" event/signal to allow objects to send
  notifications (!63).
* Various code clean-ups and test improvements.

What's new in at-spi2-core 2.45.1:
* Atk and at-spi2-atk are now merged into this project.
* Now requires meson 0.56.2 and glib 2.67.4.
* at-spi2-atk: Expose the accessible hierarchy via dbus introspection.
* Properly escape the AT-SPI bus address; fixes warnings about the address
  not containing a colon (!55).
* Add a text value to AtspiValue, so that a value can expose a textual
  description, as in the new Atk value API.
* Add atspi_event_listener_register_with_app, to allow an event listener
  to be registered only for a given application (!52).

- accessibility/atk and accessibility/at-spi2-atk have been merged into
  accessibility/at-spi2-core

- accessibility/at-spi2-core: bump consumers of removed ports atk and
at-spi2-atk

PR:		269704
Exp-run by:	antoine
---

    fa81a4f

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:23 Tobias C. Berner (tcberner) 

x11-toolkits: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  1wardd@airmail.net
  *  Alexander Kabaev <ak03@gte.com>
  *  Alexander Novitsky <alecn2002@yandex.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dima Sivachenko <dima@Chg.RU>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Juli Mallett
  *  Kenjiro Cho <kjc@csl.sony.co.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Marc Recht <marc@informatik.uni-bremen.de>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Grünewald <michipili@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Mike Krutov <neko@takino.org>
  *  Mike Meyer <mwm@mired.org>
  *  Olivier Duchateau
  *  Paul Schmehl <pauls@utdallas.edu>
  *  Peter Hawkins <thepish@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Radim Kolar
  *  Rene Ladan <rene@FreeBSD.org>
  *  Robert C. Noland III <rnoland@FreeBSD.org>
  *  Simon Barner <barner@gmx.de>
  *  Stephane Legrand <stephane@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Vanilla I. Shu <vanilla@MinJe.com.TW>
  *  Will Andrews <andrews@technologist.com>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Zane C, Bowers <vvelox@vvelox.net>
  *  asami
  *  chinsan
  *  chuckr
  *  clsung@dragon2.net
  *  dmitry@karasik.eu.org
  *  fjoe@FreeBSD.org
  *  gahr
  *  gena
  *  ijliao
  *  mi
  *  minter@lunenburg.org
  *  nivit@users.sourceforge.net
  *  ports@c0decafe.net
  *  roland.jesse@gmx.net
  *  thierry@pompo.net
  *  vanilla

With hat:	portmgr

    71b6a9f

13:23 Baptiste Daroussin (bapt) 

gnome: general cleanup

Use base make where applicable, drop .la files
Remove now useless referencehack
Convert to USES=localbase where applicable

    2789a7f

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

10:43 bapt 

In preparation of the update of glib remove the -reference ports

Those ports mainly concern old Gnome2 libraries, the behaviour of this infra
is not compatible with the meson build system (being used in newer version)
the documentation is provided otherwise in the other version

 

11:21 tobik 

x11*: Add missing USES={gl,gnome,mate}

 

19:52 tijl 

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

21:19 amdmi3 

- Switch to options helpers
- Drop 8.x support

Approved by:	portmgr blanket

 

19:13 kwm 

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

 

07:07 amdmi3 

- Add CPE info

Approved by:	portmgr blanket

 

17:17 kwm 

Sprinkle some PORTSCOUT macros around to either mark ports:
 * ignore because there will not be any new releases.
 * check specific versions or ignore devel versions.

 

11:49 kwm 

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have
ported a few that can't be installed via this way.
The old gnome-utils and gnome-games ports where split up into single ports
and where converted to meta-ports.
gnome-terminal requires a UTF-8 locale to run, gdm handles this already, but
if you use startx you need to do this yourself.

Upgrade instructions:

Delete the old and conflicting packages:
# pkg delete clutter gnome-utils gnome-panel gnome-keyring vala-vapigen \
    guile gcalctool gnome-media libgnomekbd
# pkg delete gnome-screensaver gnome-applets bug-buddy evolution-exchange \
    evolution-webcal gnome-system-tools seahorse-plugins gnome-control-center

For package users the following lines will be enough:
# pkg upgrade
# pkg install gnome3

For ports users should do the following:
# portmaster -a
# portmaster x11/gnome3

We are currently aware of two issues. The first issue is a bug in the
file monitoring code in the glib20 port. This bug causes glib programs
to crash when files in a monitored directory are added or removed.
Upstream is aware of the problem, but since the problem is quite complex
there is no solution yet. This problem isn't restricted to BSD.

The second issue is that on certain video cards totem will display a
purple/pink overlay on the video. It not clear yet where the issues
comes from.

Major thanks goes to Gustau Perez for being a driving force behind getting
GNOME 3 up to speed again. Also thanks to Antoine Brodin for running the
exp-runs.

This update was also made possible by:
	Joe Maloney
	Kris Moore
	Beeblebrox
	Ryan Lortie
	Antoine Jacoutot
	and everyone I missed

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

09:18 bapt 

Uses tar:xz

 

21:25 kwm 

Update to 0.28.2.

Use USES=libtool.

 

09:55 kwm 

Add vte3, the Gtk 3 version of the vte terminal widget.
Split off gnome-pty-helper from vte to allow both versions of vte to be
installed at the same time.
Update comment to make it clearer which gtk+ version it is for.
Enable introspection bindings in vte.

Obtained from:	GNOME dev repo.

 

23:57 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

 

20:51 bapt 

Add an explicit dependency on pkgconf

 

10:44 ak 

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

 

21:39 kwm 

Restore alt keys after gtk20 update.
While here convert to OptionsNG.

PR:		ports/176963
Submitted by:	Lawrence Chen <beastie@tardisi.com>
Obtained from:	upstream git / Gnome bug 663779

 

11:32 bapt 

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

 

20:22 kwm 

Fix a run time issue on -CURRENT more recent than 4 months ago, when the pty(4)
device was removed from the default kernel.

05:26 dinoex 

- update png to 1.5.10

06:42 marcus 

Fix wtmp interaction on 9.X and higher.

PR:             164287

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

15:37 kwm 

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
Bapt <baptiste.daroussin@gmail.com>
jsa@
miwi@
Sergio de Almeida Lenzi <lenzi.sergio@gmail.com>
Maxim Samsonov <xors@mne.ru>
Kris Moore

And pav@ for 2 exp-runs

PR:             ports/152255
                ports/143260
                ports/141033
                ports/149629
                ports/150350
                ports/151523
With hat:       gnome@

23:31 kwm 

Update to 0.24.3.

This version fixes the title set+query attack vulnability.

PR:             ports/148678
Submitted by:   Janne Snabb <snabb@epipe.com>
Security:       9a8fecef-92c0-11df-b140-0015f2db7bde

21:19 kwm 

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

This release features commits by avl, ahze, bland, marcus, mezz, and myself.

The FreeBSD GNOME Team would like to thank Anders F Bjorklund for doing the
initual packagekit porting.

And the following contributors & testers for there help with this release:
Eric L. Chen
Vladimir Grebenschikov
Sergio de Almeida Lenzi
DomiX
walder
crsd
Kevin Oberman
Michal Varga
Pavel Plesov
Bapt
kevin

and ITetcu for two exp-run

PR:     ports/143852
        ports/145347
        ports/144980
        ports/145830
        ports/145511

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

02:48 ed 

Don't apply the patch for gnome-utmp in the new world order.

We must not use login()/logout()/logwtmp() anymore. The code provided by
gnome-pty-helper should be used instead.

20:06 marcus 

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Other major improvements include an updated HAL with better volume
probing code, ufsid integration, and support for volume names containing
spaces (big thanks to J.R. Oldroyd); a new WebKit; updated AbiWord;
an updated Gimp; and a preview of the new GNOME Shell project (thanks to
Pawel Worach).

The FreeBSD GNOME Team would like to that the following additional
contributors to this release whose patches and testing really helped
make it a success:

Andrius Morkunas
Dominique Goncalves
Eric L. Chen
J.R. Oldroyd
Joseph S. Atkinson
Li
Pawel Worach
Romain Tartière
Thomas Vogt
Yasuda Keisuke
Rui Paulo
Martin Wilke
(and an extra shout out to miwi and pav for pointyhat runs)

We would like to send this release out to Alexander Loginov (avl) in
hopes that he feels better soon.

PR:             136676
                136967
                138872 (obsolete with new epiphany-webkit)
                139160
                134737
                139941
                140097
                140838
                140929

17:43 marcus 

Update to 0.20.5.

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

05:03 marcus 

Update to 0.20.4.

15:28 kwm 

Update to 0.20.3.

05:25 marcus 

Update to 0.20.2.

06:38 kwm 

Presenting GNOME 2.26.1 for FreeBSD.

Approved by:    portmgr (marcus)

05:56 marcus 

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

05:22 marcus 

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet

PR:             125857 [1]
                126993 [2]
                130031 [3]
                127399 [4]
                127661 [5]
                124302 [6]
                129570 [7]
                129936
                123790

14:16 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

13:04 kwm 

Update to 0.16.14.

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

03:50 marcus 

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

03:33 marcus 

Update to 0.16.12.

23:04 mezz 

Update to 0.16.11.

04:35 mezz 

Update to 0.16.10.

23:37 marcus 

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).

The FreeBSD GNOME team would also like to thank our various testers and
contributors:

Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)

PRs fixed in this release:

111272, 113470, 115995, 116338

10:13 ade 

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

18:30 marcus 

Update to 0.16.8.

21:41 marcus 

Update to 0.16.7.

05:38 marcus 

Update to 0.16.6.

19:30 mezz 

Update to 0.16.5.

22:40 marcus 

Merge a patch from vte SVN to fix some artifact problems that crept into
vte-0.16.4.

Obtained from:  GNOME SVN

03:56 mezz 

Update to 0.16.4, while I am here, get rid of X11BASE.

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

04:36 marcus 

Update to 0.16.3.

04:39 marcus 

Update to 0.16.2.

15:35 ahze 

Update to 0.16.1

17:07 marcus 

Sync vte with GNOME SVN to fix quite a few outstanding problems.  In
particular, terminal refreshes no longer leave artifacts, and zoom seems
to work a bit better.

05:14 marcus 

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

12:56 mezz 

Update to 0.14.2.

03:22 marcus 

Teach vte to use FreeBSD's login/logout/logwtmp functions to handle
utmp and wtmp manipulation.  This fixes a bug where gnome-pty-helper
would not relinquish ttys after a user logged out of GNOME.

Approved by:    portmgr (implicit)

08:35 marcus 

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD.  This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.

But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:

Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>

Enjoy!

Approved by:    portmgr (implicit, kris)

22:18 mezz 

- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
  USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
  for example:

        Incorrect: (Without USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

        Correct: (With USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist <-- Here...
        ================================

- Change a several of *-reference ports to install in LOCALBASE instead
  X11BASE, but only two gtkmm*-reference couldn't be change at the moment.
  Bump the PORTREVISION for change prefix.

Discussed with: marcus

12:24 marcus 

Update to 0.12.2.

16:59 jylefort 

Move the vte programming reference to the vte-reference port.

00:47 marcus 

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

Yasuda Keisuke <kysd@po.harenet.ne.jp>
Pascal Hofstee <caelian@gmail.com>
rmgls@wanadoo.fr
tmclaugh
Yuri Pankov <yuri.pankov@gmail.com>
sajd on #freebsd-gnome
ade
ankon on #FreeBSD-Gnome
mux
Pascal Hofstee <caelian@gmail.com>
QuiRK on #freebsd-gnome
Vladimir Timofeev <vovkasm@gmail.com>

20:26 danfe 

- Convert to OPTIONS
- Adjust text slightly so it fits in dialog
- DRI -> DRI/GLX since nVidia GLX does not use DRI
- Style nit: s/ifdef/if defined/ in Makefile
- Kill EOL space in pkg-descr, americanize

Approved by:    gnome (marcus)

05:51 marcus 

Update to 0.11.21.

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

23:26 ahze 

- Remove unneeded post-patch

23:03 ahze 

- Update to 0.11.18

04:22 marcus 

Update to 0.11.17.

04:49 mezz 

Fix the vte.pc, they have backed up the change of vte.pc that caused break the
apps' build such as gtksharp and etc. Bump the PORTREVISION.

Before:
        # pkg-config --cflags vte
        -I/usr/X11R6/include -I/usr/local/include/freetype2
        -I/usr/local/include

After:
        # pkg-config --cflags vte
        -DXTHREADS -DXUSE_MTSAFE_API -I/usr/local/include/glib-2.0
        -I/usr/local/lib/glib-2.0/include -I/usr/local/include/atk-1.0
        -I/usr/local/include/cairo -I/usr/X11R6/include
        -I/usr/local/include/freetype2 -I/usr/local/include
        -I/usr/X11R6/include/gtk-2.0 -I/usr/X11R6/include/pango-1.0
        -I/usr/X11R6/lib/gtk-2.0/include

Reported by:    tmclaugh (for puzzled gtksharp broke w/out change)
GNOME Bugzilla: http://bugzilla.gnome.org/show_bug.cgi?id=322240
Obtained from:  GNOME CVS (vte module)

07:55 mezz 

-Update to 0.11.16.
-Remove patch-08_multiscreen_safe; it doesn't apply clean anymore.

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

17:30 mezz 

Update to 0.11.15.

00:31 marcus 

Do not overflow G_MAXLONG with calls to gdk_property_get().

Obtained from:  http://bugzilla.gnome.org/show_bug.cgi?id=309025

06:58 marcus 

Remove some leftover locale directories.

Reported by:    GNOME Tinderbox

20:12 adamw 

Update to 0.11.13.

10:54 marcus 

Bump PORTREVISION to chase the glib20 shared lib version change.

08:53 marcus 

Update to 0.11.12.

20:29 mezz 

Took all patches from the Debian, because current VTE lacks maintain and
gnome-terminal development has stagnated. Almost all patches are in GNOME
bugzilla for the weeks and months. Bump the PORTREVISION.

-patch-01_vtemodule:
        Fix build with the python module

-patch-03_cursor_position:
        Added a patch for supporting some save/restore cursor position console
        sequences

-patch-04_dsp_non_alias:
        FcConfigSubstitute in place of _vte_fc_defaults_from_gtk to get
        antialias and hinting value

        http://bugs.gnome.org/show_bug.cgi?id=142640

-patch-05_performance_boost:
        Balanced performance improvement

        http://bugs.gnome.org/show_bug.cgi?id=143914

        --

        This is very amazing improvement. Here's benchmark of it to show that
        gnome-terminal isn't far from aterm and xterm anymore.

        Old benchmark:
        =======================================
        $ time ls -lR /usr/ports

        aterm: 7.99 real1.31 user2.75 sys
        xterm: 11.04 real1.34 user2.47 sys
        gnome: 41.76 real1.12 user2.45 sys (ouch....)
        =======================================

        New benchmark:
        ==============================================
        $ time ls -lR /usr/ports

        aterm: 7.28 real 1.20 user 2.41 sys
        xterm: 9.85 real 0.91 user 2.08 sys
        gnome: 10.41 real 0.86 user 2.02 sys
        ==============================================

        Big deal!

-patch-06_remove_doublefree:
        Resolve double free problem

        http://bugs.gnome.org/show_bug.cgi?id=161337

-patch-07_set_backspace_to_utf8:
        Set backspace behavior to utf8 (depends on utf8 locale)

        http://bugs.gnome.org/show_bug.cgi?id=158200

-patch-08_multiscreen_safe:
        Make vte multi-screen safe

        http://bugs.gnome.org/show_bug.cgi?id=160782

-patch-09_redraw_vte_screen:
        Redraw vte screen with correct background color

        http://bugs.gnome.org/show_bug.cgi?id=125364

-patch-10_hide_pageup_behavior:
        Hide manifestation of PageUp behavior with less

        http://bugs.gnome.org/show_bug.cgi?id=115149

<marcus>:       I for one welcome our new vte patch overlord.  I think all of
                them would make good additions.
<ahze>:         I am all for the performance_boost patch! gnome-terminal
                kinda sucks when lines are going by fast.
<mezz>:         showing the before and after benchmark.
<marcus>:       Commit! Commit! :-)

Reviewed by:    marcus and ahze

22:24 marcus 

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and
2.8:

Franz Klammer <klammer@webonaut.com>
Piotr Smyrak <piotr.smyrak@heron.pl>
Radek Kozlowski <radek@raadradd.com>
Khairil Yusof <kaeru@pd.jaring.my>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Vladimir Grebenschikov <vova@fbsd.ru>

GNOME 2.8 also features a new, FreeBSD-specific splashscreen that
was designed by jimmac for GNOME 2.8, then daemonized by
Franz Klammer <klammer@webonaut.com> and Radek Kozlowski
<radek@raadradd.com>.

As with GNOME 2.6, you cannot just "portupgrade" to GNOME 2.8.  There is
a script provided at http://www.marcuscom.com/downloads/gnome_upgrade28.sh
that will aid in the upgrade process.  Full documentation on the GNOME 2.8
upgrade is coming following this commit.

From all of us at FreeBSD GNOME, ENJOY!

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

02:51 bland 

Update to 0.11.11

01:57 marcus 

Drop the coalescence timeout from 50 to 15 to compromise between actual
rendering speed, and typing speed.  The previous setting caused some jerkiness
during key repeat.

Basically, this gives the feeling of better terminal responsiveness.

Submitted by:   Jeremy Messenger <mezz7@cox.net>

18:36 marcus 

* Teach vte about posix_openpt()
* Attempt to speed up terminal rendering a bit [1]
* Don't leave children shells linger after logging out of GNOME [2]

Submitted by:   Jean-Yves Lefort <jylefort@brutele.be> [2]
Obtained from:  http://bugzilla.gnome.org/show_bug.cgi?id=122656 [1]

03:31 marcus 

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

23:13 marcus 

Install gnome-pty-helper setgid to tty instead of setuid to root.

01:03 marcus 

Add USE_GL.

05:25 marcus 

Correct the locale dir.