Number of commits found: 59

- Welcome XFCE 4.10 to the portstree!

Special Thanks to:      rene, Olivier Duchateau <duchateau.olivier@gmail.com>
Submitted by:           Olivier Duchateau <duchateau.olivier@gmail.com>

Tested by:      phw

- Update to 4.8.3

PR:             165110
Submitted by:   Olivier Duchateau <duchateau.olivier@gmail.com>

- Fix plist

Reported by:    pavbot

- Fix build

Reported by:    pavbot

- Update to 4.8.2

PR:             160794
Submitted by:   Olivier Duchateau <duchateau.olivier@gmail.com>

Re-assign to the Xfce team.

Approved by:    oliver (previous maintainer)

make HAL support optional

PR:             ports/157097
Submitted by:   Warren Block <wblock@wonkity.com>

update to 4.8.1

PR:             ports/156312
Submitted by:   Olivier Duchateau <duchateau.olivier@gmail.com>

Welcome XFCE 4.8 to the portstree!

Special Thanks to:      miwi, Olivier Duchateau <duchateau.olivier@gmail.com>

Sync to new bsd.autotools.mk

forced commit to add that the previous commit was based on the following PRs

PR:            
ports/146921,ports/146922,ports/146924,ports/146925,ports/146926,ports/146927,ports/146928,ports/146929,ports/146930

update xfce to 4.6.2
bump PORTREVISION on all depending ports

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

bump PORTREVISION for the recent update of

x11/libexo
x11-toolkits/libxfce4gui
sysutils/xfce4-settings
x11-wm/xfce4-panel
x11/Terminal

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

update xfce to 4.6.1
bump PORTREVISION where necessary

update Xfce to 4.6

for more information please read

        http://www.xfce.org/about/news?id=21

update xfce to 4.4.3

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

define propper run dependencies

Fix INDEX, remove X_WINDOW_SYSTEM conditional.

Reported by:    erwinbot

update xfce4 to 4.4.2

Approved by:    portmgr (linimon)
Security:       CVE-2007-6531, CVE-2007-6532

- Fix a typo in bsd.sites.mk along with all the places it affected

Approved by:    oliver (maintainer of the respective ports)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

update xfce to 4.4.1
bump PORTREVISION where needed

Switch to using new files Mk/bsd.ocaml.mk [1] and Mk/bsd.xfce.mk [2].

PR:     101029 [1], 108862 [2]

Submitted by:   Stanislav Sedov <ssedov at mbsd dot msk dot ru> [1], oliver [2]

fix objformat problem more properly

fix build (by using libtool:15) with recent CURRENTs where objformat went away

Submitted by:   Masahide -mac- NODA <mac@clave.gr.jp>

Import xfce 4.4

- remove all obsolete ports or plugins
- update all plugins to their latest version to support xfce 4.4
  (otherwise they won't compile with 4.4)

fix build with non-standard X11BASE

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

update to xfce 4.2.3.1
Changelog:      http://www.xfce.org/release_notes/4.2.3.1_changelog.html

Bump PORTREVISION to chase the glib20 shared library update.

fix MASTER_SITES

Noted by:       portsurvey

Use USE_GNOME=gnomehack instead of a patch.

Suggested by:   oliver

update to 4.2.2

fix/enable installation of gettext catalogue files
bump PORTREVISION

Reported by:    Fridtjof Busse <fbusse@gmx.de>
PR:             ports/81010

adjust MASTER_SITES

update to 4.2.1

Bump PORTREVISION to chase the glib20 shared lib version change.

add some dependencies

Noted by:       pointyhat

- bring xfce4 to 4.2
- remove x11-fm/xfce4-fm-icons misc/xfce4-panel-themes (obsoleted by that
update)
- take maintainership of x11-wm/xfce4-session [1]
- bump PORTREVISION of all plugins because they need to be linked against the
new xfce4 libs

Approved by:    maintainer [1]

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

- Install internationalization support

PR:             ports/69711
Submitted by:   Matt Lancereau <matt@bsdfly.org> (maintainer)

Change maintainer's mail.
Fix MASTER_SITES

PR:             ports/69338
Submitted by:   maintainer

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Add more MASTER_SITE.

PR:             ports/66376
Submitted by:   Matt Lancereau <matt@rimasec.net> (maintainer)

- Fix the quit dialog box by using dynamic detection of gtk version
- Add another MASTER_SITE

PR:             ports/65698
Submitted by:   Matt Lancereau <matt@bsd-blax.org> (maintainer)

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Update to 0.1.4 release [1]
- Install/deinstall man pages
- Remove unneeded backslash

PR:             ports/61613 [1]
Submitted by:   Matt Lancereau <matt@rimasec.net> (maintainer) [1]
Approved by:    nork (mentor/implicitly)

Add xfce4-session 0.1.1, a session manager
for the XFce desktop environment.

Author: Benedikt Meurer <benedikt.meurer@unix-ag.uni-siegen.de>
WWW:    http://echobase.homeunix.net/~bmeurer/tmp/xfce4-session/

PR:             58712
Submitted by:   Matt Lancereau <matt@rimasec.net>

Number of commits found: 59

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities