A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 65

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

(Only the first 15 lines of the commit message are shown above )

- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
  USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
  for example:

        Incorrect: (Without USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

(Only the first 15 lines of the commit message are shown above )

Move the libgnome programming reference to the libgnome-reference port.

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

(Only the first 15 lines of the commit message are shown above )

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Back out the PTHREAD_CFLAGS/LIBS-adding stuff, now that
libtool-1.5.22 is unbroked.

Add ${PTHREAD_CFLAGS}/${PTHREAD_LIBS} to the CONFIGURE_ENV. There
appears to be some debate as to whether the root of this problem
is the libtool 1.5.22 update, but adding pthread stuff here fixes
the build problems I've been getting on 5-STABLE.

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

(Only the first 15 lines of the commit message are shown above )

Update to 2.10.1.

- Fix the packing list when NOPORTDOCS is defined [1]
- Use SUB_FILES=pkg-deinstall

PR:             ports/81156 [1]
Submitted by:   Björn König <bkoenig@cs.tu-berlin.de> [1]

Since libgnome links to libpopt, include ${LOCALBASE}/lib in the link
search path.  This fixes applications that only need to link to libgnome-2.0.

Reported by:    Mike Harding <mvh@ix.netcom.com>
                Ralf Folkerts <ralf.folkerts@gmx.de>

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

(Only the first 15 lines of the commit message are shown above )

Update to 2.8.1.

devel/gconf2
        Remove the post-install/pkg-install, since gnomehier is taking care of
        it.

devel/gnomevfs2
        Add pkg-install and pkg-deinstall to restore libgnome's gconf key if
        libgnome's .schemas exists. This fix the plist complained by pointyhat.

        Why restore libgnome's gconf key during the installtion if it exists?
        Because, libgnome always depend on gnomevfs2 so make sure the libgnome
        is still in the top when we either reinstall or upgrade gnomevfs2.

misc/gnomehier
        Remove the etc/gconf/gconf.xml.defaults/*, since the gconftool is
        taking care of it. ie: GCONF_SCHEMAS

x11/libgnome
        Add pkg-deinstall to restore gnomevfs2's gconf key if gnomevfs2's
        schemas exists. This fix the plist complained by pointyhat. Also, this
        is a real fix for the weird keyboard problem when you uninstall
        libgnome without reinstall it.

Bump the PORTREVISION in all of four ports above to fix everything with gconf
keys stuff for plist. Those have been tested in the MarcusCom CVS, GNOME
tinderbox, and my tinderbox.

Fix the build on Alpha.

Reported by:    pointyhat via kris

Bump 29 ports that use GCONF_SCHEMAS. Somehow, the diff of GNOME 2.8.x has
lost the small part. The small part was GCONF_SCHEMAS in bsd.gnome.mk that is
taking care of gconf key and schemas files for pkg-plist. Pav has committed by
re-add GCONF_SCHEMAS back in bsd.gnome.mk this afternoon. Therefore, must bump
PORTREVISION to correct our pkg-plist database installed.

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

(Only the first 15 lines of the commit message are shown above )

Update to 2.6.1.2.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Update to 2.6.1.1.

Update to 2.6.1.

Presenting GNOME 2.6.0.  The FreeBSD GNOME Team feels this our best release
ever.  It fixes many bugs, and adds some features missing in previous
FreeBSD ports.  To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:

http://www.freebsd.org/gnome/docs/faq26.html

Please read it carefully.  GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:

http://www.marcuscom.com/tinderbox/

The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts.  We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.

Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Hopefully fix the Help problem once and for all.  This adjusts the DATADIR
parameters to be share/gnome/... instead of share/...

Tested by:      adamw
                Jeremy Messenger <mezz7@cox.net>
                Franz Klammer <klammer@webonaut.com>

Fix help file detection in certain cases (especially newer apps that use
the screen-egg code).

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Chase the libxslt shared lib version with a PORTREVISION bump.

Update to 2.4.0
This was accidently missed from recent mega GNOME 2.2 -> 2.4 update.

Reported by: Pav Lucistnik <pav@oook.cz>

Allow yelp to work when a manpage has been cached into catman.

PR:             54808

Update to 2.2.3.

Update to 2.2.2.

Update to 2.2.1.

Convert to new GNOME infrastructure.

Remove USE_GNOMENG.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to GNOME 2.2.

This is Phase I.  All existing ports have been updated to their GNOME 2.2
counterparts.

Update to 2.0.6.

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

Update to 2.0.5.

Update to 2.0.4.

Update to 2.0.3.

Update to 2.0.2.

Use USE_REINPLACE.

Add a depedency on scrollkeeper.  Bump PORTREVISION.

PR:             38670

The FreeBSD GNOME team is proud to present GNOME 2.0 Release.

Update to GNOME 2.0 Release Candidate 1...the "Fever Pitch" release.

Update to the latest GNOME 2 snapshot.  This will be done it two parts.
This first part is the GNOME 2 API.  The next part will contain the desktop
components.

Update to the latest GNOME 2.0 snapshot, the "Stay on target!" release.

Allow yelp to view man pages.  Bump PORTREVISION.

Fix some help related paths.  Bump PORTREVISION.

Back to betas...Update to GNOME 2.0 beta 5.

Update to GNOME 2.0 RC2.

Update to GNOME 2.0 RC 1.

Move back to share/gnome as a datadir.

The GNOME 2.0 APIs can be installed right along with the GNOME 1.4 APIs, but
the desktops will be mutually independent.  That is, you will not be
able to install gnomedesktop, for example, on the same machine as gnomecore.
However, you will be able to install the GNOME 2.0 desktop, and use all your
favorite GNOME 1.4 applications (like gaim, AbiWord, Evolution, etc.).

- Update to 1.115.0 (version found in GNOME2 beta4);
- use USE_LIBTOOL.

Change the GNOME 2.0 library ports to use share/gnome2 instead of share/gnome
in preparation for the GNOME 2.0 desktop.

Reviewed by:    sobomax
Approved by:    sobomax

Update to GNOME 2.0 beta3.

Approved by:    sobomax

Update to 1.112.1 after a repo-copy from gnomelibs.

Number of commits found: 65

14 vulnerabilities affecting 30 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities