notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
non port: archivers/lzip/Makefile
SVNWeb

Number of commits found: 24

Sun, 27 Jan 2019
[ 17:57 gerald ] Original commit   Revision:491373
491373 archivers/lzip/Makefile
491373 archivers/lzip/distinfo
Update to lzip version 1.21.  This includes the following changes:
 - Improved detection of corrupt headers.
 - Some more error handling.
 - Improved descriptions of the -0, ..., -9, -m and -s command-line options.
Wed, 19 Dec 2018
[ 08:41 gerald ] Original commit   Revision:487787
487787 archivers/lzip/Makefile
487787 archivers/lzip/distinfo
Update to lzip version 1.20.  This includes the following changes:
 - A new option '--loose-trailing'.
 - Option '-S, --volume-size' now keeps input files.
 - Replaced 'bits/byte' with the inverse compression ratio in output.
 - Do not add a second .lz extension to the argument of an '-o' option.
 - Improved corrupt header detection to HD=3 and show corrupt or
   truncated header in multimember file and some further changes and
   improvements around progress and error reporting.
 - The documentation gained a new chapter "Output".

PR:		233802
Submitted by:	swills
Sat, 10 Nov 2018
[ 18:12 bapt ] Original commit   Revision:484628
484628 CHANGES
484628 Mk/bsd.port.mk
484628 Templates/BSD.local.dist
484628 accessibility/speech-dispatcher/Makefile
484628 archivers/fastjar/Makefile
484628 archivers/gcpio/Makefile
484628 archivers/gtar/Makefile
484628 archivers/gzip/Makefile
484628 archivers/lzip/Makefile
484628 archivers/lzlib/Makefile

(Only the first 10 of 386 ports in this commit are shown above. View all ports for this commit)
Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816
Sun, 30 Apr 2017
[ 11:20 gerald ] Original commit   Revision:439802
439802 archivers/lzip/Makefile
439802 archivers/lzip/distinfo
Update to lzip version 1.19.  This includes the following changes:
 - The option '-l, --list' has been ported from lziprecover.
 - Don't allow mixing different operations (-d, -l or -t).
 - Compression time of option '-0' has been slightly reduced.
 - Decompression time has been reduced by 2%.
 - A few internal improvements and increasing checking.

Set INSTALL_TARGET=install-strip to strip installed executable.
Sun, 14 Aug 2016
[ 12:15 gerald ] Original commit   Revision:420186
420186 archivers/lzip/Makefile
420186 archivers/lzip/distinfo
Update to lzip version 1.18 which includes the following changes:
 - New options -a and --trailing-error.
 - Decompression time has been reduced by 2%.
 - Removed decompression support for version 0 files.
 - Some bug fixes.
 - New chapter 'Trailing data' in the texinfo documentation.

Plus the following changes from version 1.17, which we missed:
 - New chapter 'Quality assurance' in the texinfo documentation.
 - Reorganization of the compression code.
Sat, 11 Oct 2014
[ 07:32 gerald ] Original commit   Revision:370627
370627 archivers/lzip/Makefile
370627 archivers/lzip/distinfo
Update to lzip version 1.16 which includes the following changes:
 - Compression ratio of option -9 has been slightly increased.
 - Compression time has been reduced by 4%, by 2% for option -0.
 - The behavior is now like 'cp -p'.
 - The license changed to GPL version 2 or later.
Sun, 2 Mar 2014
[ 01:40 gerald ] Original commit   Revision:346728
346728 archivers/lzip/Makefile
346728 archivers/lzip/pkg-descr
Adopt this port.

Simplify URL and editorial changes in pkg-descr.
Wed, 26 Feb 2014
[ 15:00 marino ] Original commit   Revision:346209
346209 archivers/lzip/Makefile
archivers/lzip: Remove LOCAL MASTER_SITES; this was for version 1.14 only
Wed, 12 Feb 2014
[ 10:01 marino ] Original commit   Revision:343879
343879 archivers/lzip/Makefile
archivers/lzip: Reset maintainer

The last three PRs all timed out.
Sat, 9 Nov 2013
[ 13:45 wg ] Original commit   Revision:333291
333291 archivers/lzip/Makefile
333291 archivers/lzip/distinfo
archivers/lzip: fix links and update to 1.15

- Links for 1.14 were bad, fix it by updating to 1.15
- Allow staging [1]

PR:		ports/183073, ports/183540
Submitted by:	David Newman <dnewman networktest.com>, delphij, wg [1]
Approved by:	maintainer (timeout)
Thu, 31 Oct 2013
[ 23:49 marino ] Original commit   Revision:332321
332321 archivers/lzip/Makefile
archivers/lzip: Unbreak fetch with LOCAL

The lzip developers do something very annoying.  When they issue a new
release, they remove the previous release's tarball in .gz format.
They keep the tarball in .lz format, but move it to the "old"
subdirectory.  The result is that gzipped tarballs for lzip get very
scarce, and requiring lz to unzip lz is not an option.  I don't
normally store distfiles for other maintainers, but it appears that
many folks have been asking for this port to be fixed, so I made
an exception and put a copy of lzip tarball in LOCAL/marino.

PR:		ports/182982
Approved by:	maintainer timeout
Fri, 20 Sep 2013
[ 13:11 bapt ] Original commit   Revision:327699
327699 archivers/9e/Makefile
327699 archivers/advancecomp/Makefile
327699 archivers/amigadepacker/Makefile
327699 archivers/aolserver-nszlib/Makefile
327699 archivers/arc/Makefile
327699 archivers/arj/Makefile
327699 archivers/ark/Makefile
327699 archivers/bicom/Makefile
327699 archivers/bzip/Makefile
327699 archivers/bzip2/Makefile

(Only the first 10 of 221 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)
Wed, 21 Aug 2013
[ 22:58 wg ] Original commit   Revision:325169
325169 archivers/lzip/Makefile
325169 archivers/lzip/distinfo
325169 archivers/lzip/pkg-descr
archivers/lzip: update to 1.14

- Update to 1.14
- Trim Makefile header
- Rework pkg-descr and fix one space WWW:

PR:		ports/180968
Submitted by:	Jason Harris <jharris widomaker.com>
Approved by:	maintainer (timeout)
Mon, 7 May 2012
[ 17:34 sylvio ] Original commit 
1.11 archivers/lzip/Makefile
1.8 archivers/lzip/distinfo
- Update to 1.13
Tue, 17 May 2011
[ 20:24 sylvio ] Original commit 
1.10 archivers/lzip/Makefile
- Add license
Fri, 13 May 2011
[ 18:05 sylvio ] Original commit 
1.9 archivers/lzip/Makefile
1.7 archivers/lzip/distinfo
- Update to 1.12
Thu, 3 Feb 2011
[ 17:12 sylvio ] Original commit 
1.8 archivers/lzip/Makefile
1.6 archivers/lzip/distinfo
- Update to 1.11

Feature safe:   yes
Fri, 9 Apr 2010
[ 23:38 sylvio ] Original commit 
1.7 archivers/lzip/Makefile
1.5 archivers/lzip/distinfo
- Update to 1.10

Approved by:    itetcu (mentor, implicit)
Tue, 2 Feb 2010
[ 23:39 sylvio ] Original commit 
1.6 archivers/lzip/Makefile
1.4 archivers/lzip/distinfo
- Update to 1.9

Approved by:    miwi (mentor)
Fri, 27 Nov 2009
[ 22:52 sylvio ] Original commit 
1.28 archivers/hpack.non-usa.only/Makefile
1.13 archivers/lbrate/Makefile
1.5 archivers/lzip/Makefile
1.19 archivers/macutils/Makefile
1.7 archivers/mtf/Makefile
1.68 archivers/rpm/Makefile
1.23 archivers/ucl/Makefile
1.10 archivers/xar/Makefile
1.16 archivers/xdms/Makefile
1.18 archivers/xmill/Makefile

(Only the first 10 of 100 ports in this commit are shown above. View all ports for this commit)
- Update my mail address to FreeBSD

Approved by:    miwi (mentor)
Tue, 15 Sep 2009
[ 23:52 garga ] Original commit 
1.4 archivers/lzip/Makefile
1.3 archivers/lzip/distinfo
Update to 1.8

PR:             ports/138747
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br> (maintainer)
Feature safe:   yes
Sun, 5 Jul 2009
[ 07:56 lioux ] Original commit 
1.3 archivers/lzip/Makefile
o Uphold CXX, CXXFLAGS and LDFLAGS.
o Bump PORTREVISION.

PR:             136312
Approved by:    maintainer
Tue, 30 Jun 2009
[ 14:28 araujo ] Original commit 
1.2 archivers/lzip/Makefile
1.2 archivers/lzip/distinfo
- Update to 1.7.

PR:             based on ports/136003
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br> (maintainer)
Approved by:    maintainer
Sun, 21 Jun 2009
[ 20:44 amdmi3 ] Original commit 
1.223 archivers/Makefile
1.1 archivers/lzip/Makefile
1.1 archivers/lzip/distinfo
1.1 archivers/lzip/pkg-descr
Lzip is a lossless data compressor based on the LZMA algorithm,
with very safe integrity checking and a user interface similar
to the one of gzip or bzip2.

WWW:    http://www.nongnu.org/lzip/lzip.html

Sylvio Cesar <scjamorim@bsd.com.br>

PR:             135889
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>

Number of commits found: 24

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
mod_perl2Oct 09
xpdfOct 06
xpdf3Oct 06
xpdf4Oct 06
unboundOct 03
cactiOct 02
gitlab-ceOct 02
gitlab-ceOct 02
ruby24Oct 02
ruby25Oct 02
mongodb34Sep 30
mongodb34Sep 30
mongodb36Sep 30
mongodb36Sep 30
mongodb40Sep 30

12 vulnerabilities affecting 34 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities

Last updated:
2019-10-11 18:37:07


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 37993
Broken 396
Deprecated 438
Ignore 662
Forbidden 3
Restricted 160
No CDROM 74
Vulnerable 29
Expired 6
Set to expire 409
Interactive 0
new 24 hours 1
new 48 hours5
new 7 days22
new fortnight64
new month228

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2019 Dan Langille. All rights reserved.