| non port: audio/ecasound/Makefile |
|
SVNWeb
|
Number of commits found: 72 |
|
Mon, 2 Aug 2021
|
[ 16:03 yuri (Yuri Victorovich) ]  5708ae4 (Only the first 10 of 166 ports in this commit are shown above.  )
audio/jack: Update to Jack2: 0.125.0 -> 1.9.16
Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.
PR: 251125
Submitted by: Florian Walpen <dev@submerge.ch> (original version)
|
|
Sat, 15 May 2021
|
[ 07:14 tobik (Tobias Kortkamp) ] 9671981 (Only the first 10 of 40 ports in this commit are shown above. )
*: Remove unnecessary 'port' argument from USES=readline
PR: 248459
Exp-run by: antoine
|
|
Tue, 6 Apr 2021
|
[ 14:31 mat (Mathieu Arnold) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 5 Jan 2021
|
[ 15:33 nc ]   (Only the first 10 of 30 ports in this commit are shown above. )
Set MAINTAINER of my ports to my FreeBSD handle (nc@).
Reviewed by: 0mp (mentor)
Approved by: 0mp (mentor)
Differential Revision: https://reviews.freebsd.org/D27966
|
|
Sun, 6 Dec 2020
|
[ 08:03 rhurlin ]
audio/ecasound: Update to 2.9.3
Minor release with some bugfixes. Most important change
is full support for Python 3 now.
Changelog: https://nosignal.fi/ecasound/history.php
PR: 251521
Submitted by: Neel Chauhan <neel@neelc.org> (maintainer)
Approved by: arrowd (mentor)
Differential Revision: https://reviews.freebsd.org/D27491
|
|
Wed, 10 Apr 2019
|
[ 06:18 antoine ] (Only the first 10 of 399 ports in this commit are shown above. )
Bump a few PORTREVISIONs after r498529
With hat: portmgr
|
|
Tue, 9 Apr 2019
|
[ 14:04 sunpoet ] (Only the first 10 of 289 ports in this commit are shown above. )
Update devel/readline to 8.0
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://tiswww.case.edu/php/chet/readline/CHANGES
PR: 236156
Exp-run by: antoine
|
|
Tue, 27 Jun 2017
|
[ 13:46 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
Update devel/readline to 7.0 patch 3
- Bump PORTREVISION for shlib change
Changes: https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision: https://reviews.freebsd.org/D11172
PR: 219947
Exp-run by: antoine
|
|
Fri, 21 Apr 2017
|
[ 14:14 amdmi3 ]
- Fix shebangs
- Switch to USES=localbase
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Sat, 3 Jan 2015
|
[ 08:47 mva ] (Only the first 10 of 17 ports in this commit are shown above. )
- Convert <OPTION>_USE= PYTHON... to <OPTION>_USES= python...
With hat: python@
|
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 17 Oct 2014
|
[ 13:44 amdmi3 ]
- Add build-depend on pkgconfig, needed at least for OIL option
- Drop @dirrm* from plist
|
|
Sat, 5 Jul 2014
|
[ 14:53 marino ]
audio/ecasound: Use ports readline instead of system readline
|
|
Mon, 28 Apr 2014
|
[ 13:54 bapt ]
Convert from USE_AUTOTOOLS=libtool -> USES=libtool
While here:
- audio/esound:
* use @sample
* use install-strip target to strip binaires
- audio/Maaate:
* strip binaries
- audio/xmms-festalon:
* strip binaries
- audio/freealut
* strip binaries
|
|
Mon, 13 Jan 2014
|
[ 19:27 danilo ]
- Update from 2.9.0 to 2.9.1
- Remove GPLv3 and add LGPL21 to LICENSE
PR: ports/185516
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Sun, 24 Nov 2013
|
[ 09:25 mva ]
- Fix usage of 'python' to get rid of the implicit lang/python
dependency
- Fix OPTIONS
|
|
Tue, 29 Oct 2013
|
[ 09:55 kwm ]
Fix libaudiofile library name.
|
|
Mon, 14 Oct 2013
|
[ 14:54 sunpoet ]
- Update MASTER_SITES and WWW
- While I'm here:
- Remove deprecated PTHREAD_*
- Convert to new OPTIONS helper
- Support STAGEDIR
PR: ports/181887
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Fri, 30 Aug 2013
|
[ 23:01 bapt ] (Only the first 10 of 222 ports in this commit are shown above. )
Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Fri, 26 Jul 2013
|
[ 23:46 bapt ] (Only the first 10 of 12 ports in this commit are shown above. )
Chase audio/arts removal
|
|
Mon, 6 May 2013
|
[ 15:34 bapt ] (Only the first 10 of 78 ports in this commit are shown above. )
Convert USE_NCURSES by USES=ncurses
Convert USE_READLINE by USES=readline
|
|
Thu, 13 Dec 2012
|
[ 04:30 araujo ]
- Support USE_READLINE.
- Trim header.
PR: ports/171959
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Sun, 17 Jun 2012
|
[ 20:07 sylvio ]
- Update to version 2.9.0
Remove file:
files/patch-ecatools__ecaplay.c
PR: ports/168990
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Fri, 1 Jun 2012
|
[ 06:57 bapt ] (Only the first 10 of 14 ports in this commit are shown above. )
Convert to new options framework
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 2 Jul 2011
|
[ 07:21 miwi ]
- Update to 2.8.1
PR: 158478
Submitted by: Ports Fury
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 18 Sep 2010
|
[ 15:57 makc ]
Fix CONFIGURE_ARGS
PR: ports/150662
Submitted by: KATO Tsuguru <tkato432 at yahoo.com>
|
|
Wed, 1 Sep 2010
|
[ 10:11 bapt ]
- Update to 2.7.2
- Changelog: http://eca.cx/relnotes/ecasound_v2_7_2_relnotes.txt
Approved by: mentors (implicit)
|
|
Mon, 1 Mar 2010
|
[ 22:35 sylvio ]
- Update to 2.7.1
Approved by: itetcu (mentor)
Feature safe: yes
|
|
Mon, 2 Nov 2009
|
[ 10:54 miwi ]
- Update to 2.7.0
PR: 140113
Submitted by: Ports Fury
|
|
Tue, 12 May 2009
|
[ 11:28 itetcu ] (Only the first 10 of 20 ports in this commit are shown above. )
Fix LIB_DEPENDS on devel/readline: its sh lib version was bumped recently from
5 to 6.
Forgotten by: araujo@
Reported by: QAT
|
|
Fri, 20 Feb 2009
|
[ 16:25 miwi ]
- Update to 2.6.0
PR: 131822
Submitted by: Ports Fury
|
|
Mon, 25 Aug 2008
|
[ 21:16 miwi ]
- Update to 2.5.2
PR: 126795
Submitted by: Ports Fury
|
|
Mon, 18 Aug 2008
|
[ 22:08 miwi ]
- Update to 2.5.0
PR: 126593
Submitted by: Ports Fury
|
|
Tue, 23 Oct 2007
|
[ 23:06 miwi ]
- Update to 2.4.6.1
PR: 117330
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Mon, 8 Oct 2007
|
[ 14:08 miwi ]
- Update to 2.4.6
PR: 116016
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Sat, 14 Apr 2007
|
[ 16:20 gabor ] (Only the first 10 of 11 ports in this commit are shown above. )
- Remove 4.X support from unmaintained ports in categories starting with
letter a-c
|
|
Wed, 10 Jan 2007
|
[ 18:21 miwi ]
- Fix manpage install
- Bump PORTREVISION
Submitted by: pointyhat via kris
|
|
Thu, 21 Dec 2006
|
[ 19:57 miwi ]
- Update to 2.4.5
PR: ports/106988
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Mon, 14 Aug 2006
|
[ 10:08 clsung ] (Only the first 10 of 29 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include astro/ audio/ biology/ chinese/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Sun, 6 Aug 2006
|
[ 05:38 rafan ]
- Depend on readline port if library exists
program will link it rather than a system one
PR: ports/101437
Submitted by: Stanislav Sedov <ssedov at mbsd.msk.ru>
|
|
Wed, 3 May 2006
|
[ 05:14 edwin ] (Only the first 10 of 196 ports in this commit are shown above. )
Remove USE_REINPLACE from ports in categories starting with A.
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 31 Jan 2006
|
[ 16:11 barner ]
- Update to 2.4.4
Submitted by: Ports fury
PR: ports/92609
|
|
Sun, 18 Dec 2005
|
[ 10:37 lawrance ]
Update to 2.4.3.
PR: ports/90562
Submitted by: Ports Fury
|
|
Sat, 26 Nov 2005
|
[ 05:13 linimon ]
Reset maintainer at his request.
PR: ports/89566
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Fri, 4 Jun 2004
|
[ 17:29 ade ] (Only the first 10 of 149 ports in this commit are shown above. )
Sync with new bsd.autotools.mk
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Thu, 23 Oct 2003
|
[ 19:07 arved ]
USE_REINPLACE
Respect CPPFLAGS and LDFLAGS
PR: 47651
Submitted by: Simon Schubert
|
|
Wed, 24 Sep 2003
|
[ 09:37 osa ] (Only the first 10 of 143 ports in this commit are shown above. )
Make portlint(1) happy by changing strip to ${STRIP_CMD}
Submitted by: Oleg Karachevtsev <ok@etrust.ru>
PR: 56998
|
|
Sun, 22 Jun 2003
|
[ 22:48 arved ]
Update to 2.2.3
Fix Build.
PR: 50858
Submitted by: "The Anarcat" <anarcat@anarcat.ath.cx>
|
|
Tue, 6 May 2003
|
[ 07:02 kris ]
BROKEN: Does not compile
|
|
Sun, 6 Apr 2003
|
[ 00:05 arved ]
Update to 2.2.2
PR: 50580
Submitted by: maintainer
|
|
Fri, 21 Feb 2003
|
[ 10:59 knu ] (Only the first 10 of 192 ports in this commit are shown above. )
De-pkg-comment.
|
|
Tue, 14 Jan 2003
|
[ 04:17 kris ]
Add some missing manpages
|
|
Thu, 26 Dec 2002
|
[ 10:57 edwin ]
Removed sourceforge.net from the master-sites, the distfiles weren't
there.
Noticed by: portsurvey
|
|
Wed, 6 Feb 2002
|
[ 05:02 pat ]
Update to 2.0.4
|
|
Sun, 6 Jan 2002
|
[ 06:20 will ] (Only the first 10 of 40 ports in this commit are shown above. )
First round of auto* cleanups: - USE_AUTO* -> USE_AUTO*_VER=* where required
- USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK -
Other minor changes to fix things
|
|
Thu, 6 Dec 2001
|
[ 19:18 lioux ]
o Update to 2.0.3 o Style fix: replace all spaces with tabs where appropriate
o Add WITH_OPTMIZED_CFLAGS knob, build without any unless defined o Advertise
WITH* options
|
|
Sat, 15 Sep 2001
|
[ 05:35 dwcjr ]
Make configure script find audio libs Bump PORTREVISION
|
|
Fri, 24 Aug 2001
|
[ 18:04 roam ]
Update to 2.0.2, introducing NOPORTDOCS support.
|
|
Tue, 24 Apr 2001
|
[ 23:22 olgeni ] (Only the first 10 of 13 ports in this commit are shown above. )
Update port to version 1.9dev5, plus misc. cleanups.
|
|
Sat, 17 Mar 2001
|
[ 13:40 dinoex ]
from maintainer: Actually, the problem is that the ecasound port can
optionally be compiled with python so that you have another interface to the
program. The python dependency wasn't recorded in the makefile and the port
was building the python bits by default, so the process of installing or
packaging failed a one point. The fix is quite simple. And it features a
couple of other enhancments. First off, the current plist must be renamed
"pkg-plist.py". Second, a new plist must be made with the following diff on
the original:
|
|
Tue, 26 Dec 2000
|
[ 05:52 will ] (Only the first 10 of 12 ports in this commit are shown above. )
Add ecasound 1.8.5d15, a software package designed for multitrack audio
processing.
|
Number of commits found: 72 |
As an Amazon Associate I earn from qualifying purchases.