Number of commits found XX: 65

Deprecate most glib12 consumers

With hat:	portmgr

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Bump portrevision after png update

Properly fix for png > 1.5

Patch configure instead of aclocal.m4 and set CONFIGURE_ENV instead of
patching configure.in to avoid USE_AUTOTOOLS

devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
  didn't conflict with early development versions of glib/gtk 2.0

- Switch to USES=libtool

Approved by:	portmgr blanket

Support stage

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio

With hat:	portmgr

Remove all options bringing gnome1 libraries

Dot not arbritrary change PKGNAME

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- bugfix USE_GETTEXT
Submitted by:   Alex Kozlov

- bugfix USE_GETTEXT
Submitted by:   Alex Kozlov

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with A

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove USE_REINPLACE from ports in categories starting with A.

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

back-out the last commit since it was done with mangled CVS/Root files and that
resulted in checking n the stuff into the wrong directory...
Bump PORTEPOCH (because of PORTVERSION wents backward)

add gqmpeg-devel - the gtk20 port of gqmpeg

- Update to 0.20.0

PR:             ports/65462
Submitted by:   michael johnson <ahze@ahze.net>
Approved by:    maintainer timeout (14 days)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Remove the USE_GNOMENG macro.

De-pkg-comment.

Update to 0.19.0

PR:             ports/46906
Submitted by:   maintainer

Fix typo (DATATDIR -> DATADIR)

PR:             ports/46640
Submitted by:   maintainer, marius@alchemy.franken.de

Fix things after recent GNOMENG conversion.

Submitted by:   bento

Use USE_GNOMENG.

PR:             42232
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

Fix installation of message catalogs for WITH_GNOME=yes.

Notified by:    Hidetoshi IMAI <imai.hidetoshi@nttcom.co.jp>
Via:            Katsuyuki TATEISHI <katsu@iec.hiroshima-u.ac.jp>

Remove kludge and fix -lintl detection.

Approved by:    maintainer

Update to 0.17.0.
Submitted by TATEISHI Katsuyuki <katsu@iec.hiroshima-u.ac.jp>.

PR:             40728
Submitted by:   Michael Lyngboel <lyngbol@wheel.dk>

upgrade to 0.16.0

PR:             39698
Submitted by:   maintainer

Update to 0.15.0

PR:             36577
Submitted by:   maintainer

Update to 0.13.0    

Update to 0.12.1    

o Update to 0.12.0   o Add WITH_MPG321 option which build this port with    
RUN_DEPENDS=mpg321 instad of mpg123    

o update to 0.11.0.   o detect libpng and libintl correctly.   o support
WITHOUT_GNOME correctly.    

for slave ports    

use WANO_GNOME hook to unbreak non-gnome case.    

GNOME Controlcenter is not needed. We only need GDK-pixbuf + GTK.   change
maintaer's email    

Various patches (mainly shared library revision changes) for those   ports that
depend on GNOME and need to change for 1.4    

Update to 0.9.0    

Update to 0.8.3    

bump PORTREVISION; added extra LIB_DEPENDS.   This should prevent potential
problem for port-only users.    

add missing LIB_DEPENDS to gdk_pixbuf.    

Update MASTER_SITES to sourceforge.   Utilize MASTER_SITE_SOURCEFORGE.    

Maintainer change and close-pr    

Update to 0.8.1    

Implement WANT_IMLIB and USE_IMLIB.    

Update MASTER_SITES and WWW to fix fennerism.    

- Fix LIB_DEPENDS to actually used one   - Support install macros    

Number of commits found XX: 65

16 vulnerabilities affecting 89 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-05-31 11:54:41