notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.
New feature planned: get notified when the package is available. Now is the time to contribute ideas/suggestions.
non port: audio/linux-arts/Makefile

Number of commits found: 23

Saturday, 14 Apr 2012
20:24 netchild search for other commits by this committer
Set the expiration date for all ports which depend upon linux_base-fc4 to
the EoL of the last 7.x release. The 7.x branch is the only supported
FreeBSD version not yet at his EoL which needs a linux 2.4 based linuxulator
environment (linux_base-f10 doesn't work there).

I didn't bump the portrevision, this is mostly done as a hint for ports
committers to tell them that at least the emulation@-owned ports need
to stay until then (even the forbidden ones). The dependent ports need to
go at the same time, but are free to be deleted before.

Discussed with: bsam
Original commit
Tuesday, 2 Jun 2009
21:15 bsam search for other commits by this committer
. add linux-f10 ports to the rank of CONFLICTS for linux-fc4 ports;
. bump PORTREVISIONs.
Original commit
Wednesday, 1 Apr 2009
10:10 bsam search for other commits by this committer
Finish repocopies of new linux-f8 infrastructure ports:
. add CONFLICTS to 47 original ports;
. bump PORTREVISIONs for all of them;
. pet portlint for 2-3 ports (misplaced PORTREVISION).
Original commit
Tuesday, 29 Apr 2008
05:11 linimon search for other commits by this committer
Reset jylefort's port maintainerships.  portmgr has taken his commit bit
into safekeeping due to inactivity.
Original commit
Saturday, 19 Apr 2008
17:56 miwi search for other commits by this committer
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Original commit
Thursday, 7 Sep 2006
09:58 bsam search for other commits by this committer
* Fri Jun 02 2006 Than Ngo <than@redhat.com> 1.5.3-0.1.fc4
  - update to 1.5.3

Approved by:    jylefort (maintainer, implicit)
Original commit
Thursday, 13 Jul 2006
12:35 bsam search for other commits by this committer
o  change default linux package at bsd.linux-rpm.mk for automatic
   plist creation to FC4;
o  upgrade audio ports which use automatic plist creation to use FC4
   packages or bump PORTREVISION for those which already use FC4
   packages.                                                           [1]

Approved by:    julefort (maintainer, implicit)   [1]
                netchild (mentor)
Original commit
Tuesday, 27 Jun 2006
14:16 bsam search for other commits by this committer
Update to a newer version 1.5.2-0.1.fc4.

Reviewed by:    multimedia (silence)
Approved by:    jylefort (maintainer, implicit),
                netchild (mentor, implicit)
Original commit
Sunday, 30 Apr 2006
22:00 netchild search for other commits by this committer
bsd.linux-rpm.mk:
 - document some variables
 - set some variables based upon presets [1]
 - automatically guess the src RPM (needs to be overidden for multi-RPM
   ports) [1]
 - allow to specify complete directories or a set of files for
   automatic brandelf handling (BRANDELF_DIRS/BRANDELF_FILES) [1]
 - add fc3 to the automatic plist handling [1]
 - allow to override the linux-rpm-generate-plist target
 - also detect @dirrmtry in the automatic plist handling [1]
 - adopt the new-plist target to the new world order [1]

ports: [1,2]
 - edit WRKSRC (add rpm/i386/${LINUX_DIST}/${LINUX_DIST_VER})
 - add source distfiles to distinfo to allow auto fetching sources
   with defined PACKAGE_BUILDING;
 - remove some variables already defined at linux-rpm
   (i.e. MASTRE_SITE_SUBDIR);
 - add LINUX_DIST_VER to every port (in case default linux_base
   changes);
 - bump PORTREVISION (so that the ports build cluster puts the
   src and binary RPM's to the new location)
 - update linux-openal to the newest FC3 port

All errors are mine because of cut&paste patch merging.

Aproved by:     maintainer [2]
Reviewed on:    multimedia [1]
Submitted by:   Boris Samorodov <bsam@ipt.ru> [1]
Original commit
Sunday, 22 Jan 2006
15:35 jylefort search for other commits by this committer
Switch to the USE_LINUX_RPM framework.
Original commit
Tuesday, 29 Nov 2005
10:06 jylefort search for other commits by this committer
The linuxulator does not support Linux amd64 code. When ${ARCH} is
amd64, use the i386 RPM packages.
Original commit
Saturday, 26 Nov 2005
19:28 jylefort search for other commits by this committer
- Update to 1.3.0-4
- Take maintainership

Approved by:    maintainer
Original commit
Friday, 17 Jun 2005
22:59 netchild search for other commits by this committer
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not neccesary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
    instead of a hardcoded reference.
  - Change all ports to comply to the "new world order".
  - The Ports Collection now allows to override the default linux_base port.
    Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
    ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
    ${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
  - If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
    port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
    be marked as IGNORE. [1]
  - Readd USE_LINUX knobs into several ports and make several uses of a
    conditional dependency ("USE_LINUX?=") into an unconditional one
    ("USE_LINUX=") which where removed/changed by Trevor to allow the use of
    alternative linux_base ports. While this is a nice goal, the implementation
    resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
    in this commit is supposed to fix the problem while keeping the feature.
    Basicaly this includes a backout of Trevor's commit, to prevent confusion
    I mention it here explicitely.
  - Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
    Chase dependencies for this.
  - Changes to make linux_devtools installable on amd64, remove some stray
    device nodes (they don't work on recent OS versions and aren't really
    needed).
  - Make linux_base-8 PREFIX clean and remove some stray device nodes.
    Additionally tell a little bit more about how to setup NIS/YP [2].
  - Update the PGSQL dependency in the linux-opengroupware port to a recent
    version (the old one isn't available anymore), I don't know if this
    works (at least it isn't more broken than before).
  - Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
    ports, the former path exists already and gets populated by other
    packages too (PREFIX=LINUXPREFIX!).
  - Fix some obvious (non-linuxolator) bugs in some linux ports while being
    there.
  - Bump PORTREVISION where neccesary.

Requested by:   portmgr (linimon) [1]
Submittted by:  Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by:    portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on:      ports cluster (kris)
Reviewed by:    silence on emulation@
Superseedes PR: 69997

Maintainer approval from:
        chris@chrisburkert.de
        cracauer@cons.org
        des
        girgen
        jamie@bishopston.net
        mezz
        mi
        nivit@users.sf.net
        pat
        simond@irrelevant.org
        riggs@rrr.de
        Udo.Schweigert@Siemens.com
Original commit
Tuesday, 12 Apr 2005
03:26 obrien search for other commits by this committer
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
Original commit
Monday, 11 Apr 2005
08:04 obrien search for other commits by this committer
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
Original commit
Tuesday, 1 Mar 2005
21:51 trevor search for other commits by this committer
Respect the user's USE_LINUX setting.
Original commit
Friday, 31 Dec 2004
18:24 netchild search for other commits by this committer
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.

It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).

This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).

Changes:
 - change the default linux_base from v7 to v8
 - add a newer freetype to linux_base-8 for nicer fonts display [1]
 - don't let cpio use hardlinks in the linux_base-8 port to quiet some
   warnings in some cases [2]
 - fix a cut&past error in the linux_base-8 pkg-install script [3]
 - convert the binary knob "USE_LINUX" to a version specifier, e.g.
   USE_LINUX=<value> specifies a dependency upon
   emulators/linux_base-<value>, exceptions are a value of "7" (which
   does what you want and adds a dependency to linux_base) and any
   value without a corresponding port in
   PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
   the default linux_base)
 - don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
   this allows us to use the USE_LINUX_PREFIX knob for linux_base and
   paves the way for splitting up future linux base ports into
   individual pieces
 - remove RESTRICTED from some GPL licensed ports, even when we only
   distribute binaries, we get them from official linux sites, so
   anyone can grab them there if he needs to
 - add a dependency upon the linux X11 bits where necessary (based upon
   guesswork)
 - don't use USE_X_PREFIX in some linux ports since it adds a dependency
   to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
   solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
 - bump the portrevision of the linux ports ("better safe than sorry"
   algorithm)
 - pass maintainership of the important linux infrastructure to a
   mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
   doesn't like this: tell us your bikeshed color at freebsd-emulation@,
   my color would be "linuxolator@" in case someone cares...)
 - add a pkg-install script for linux-fontconfig, but don't use it;
   everything should work without it (the FreeBSD fc-cache program should
   do all the work), but in case we need it we just need to decomment the
   pkg-install part in the Makefile
 - fix some dependencies
 - fix some bugs
 - add some static plists
 - unbreak the ports with dependecies to more than one linux_base

This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.

Known bugs:
 - the linux-mesa and linux-devtools ports install libGL*.so symlinks
 - some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
   the linux X11 port, so linx_Base-8 moans at deinstall time)

Future work (interested souls should coordinate with freebsd-emulation@):
 - add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
   or modify the behavior of USE_XLIB in the USE_LINUX case
   AFAIK trevor has some patches.
 - make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
   the PREFIX?= workaround in some linux ports
   Should be discussed/coordinated on/with x11@.
 - move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
 - update to a more recent linux base

PR:                     69997, 70539 (and maybe others)
Discussed with/on:      java@, x11@, trevor, portmgr
Tested by:              mezz, portmgr, pointyhat
RPM hunted down by:     Joseph Gelinas <scirocco@tasam.com> [1]
Requested by:           portmgr [2]
Submitted by:           kris [3]
Approved by:            portmgr
Original commit
Wednesday, 4 Feb 2004
05:21 marcus search for other commits by this committer
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)
Original commit
Friday, 14 Nov 2003
18:01 bms search for other commits by this committer
Fix a typo.

Noticed by:     Oliver Eikemeier
Original commit
14:51 bms search for other commits by this committer
Fix breakage during install target; linux port uses rpm to check for
existing installation, so bring in linux-base-8 under RUN_DEPENDS to
bring in the packages.rpm file.

Noticed by:     kris
Original commit
Sunday, 26 Oct 2003
21:24 bms search for other commits by this committer
Bump revision to reflect change in dependency graph.
Original commit
21:22 bms search for other commits by this committer
Remove USE_LINUX_PREFIX as it brings in a dependency on the Red Hat 7 userland;
this port is based on the Red Hat 8 userland.

Reported by:    kris
Original commit
Monday, 6 Oct 2003
11:54 bms search for other commits by this committer
Add the Linux version of the KDE arts sound library (it is an unlikely
dependency for the Dell RAID tools).

Reviewed by:    edwin
Original commit

Number of commits found: 23