non port: audio/mythplugin-mythmusic/Makefile |
SVNWeb
|
Number of commits found: 44 |
Sun, 25 Sep 2022
|
[ 20:14 Christian Weisgerber (naddy) ] 1e5aaab (Only the first 10 of 76 ports in this commit are shown above. )
audio/flac: bump port revision of consumers after update to 1.4.1
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Sun, 4 Sep 2022
|
[ 00:08 Neel Chauhan (nc) Author: Alan Hicks ] bcdd480 (Only the first 10 of 17 ports in this commit are shown above. )
MythTV: Update port group to version 32
PR: 263311
|
Tue, 5 Jul 2022
|
[ 17:51 Bernhard Froehlich (decke) ] 27d0337 (Only the first 10 of 19 ports in this commit are shown above. )
*/*: Release my babies from my "created by" comments
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Wed, 16 Dec 2020
|
[ 02:48 kevans ] (Only the first 10 of 23 ports in this commit are shown above. )
multimedia/mythtv: update to 31.0
- Upgrade multimedia/mythtv and multimedia/mythtv-frontend from 30 to 31.0
- Bumps python to 3.5+
- Uses ffmpeg 4.3.1 so CVE-2016-10191 no longer applies
- Configuration options changed to reflect update
Release notes: https://www.mythtv.org/wiki/Release_Notes_-_31
audio/mythplugin-mythmusic also bumped as a reverse dep.
Pass maintainership of multimedia/mythtv* to submitter.
PR: 249484
Submitted by: Alan Hicks <ahicks p-o co uk>
|
Thu, 12 Dec 2019
|
[ 15:11 jhale ] (Only the first 10 of 31 ports in this commit are shown above. )
Update sysutils/libcdio to 2.1.0
Update sysutils/libcdio-paranoia to 10.2+2.0.1
Bump PORTREVISION on consumers due to shared library version increase
|
Tue, 4 Jun 2019
|
[ 09:01 amdmi3 ]
- Update WWW
- Cosmetic fixes
|
Sun, 10 Feb 2019
|
[ 22:28 tobik ] (Only the first 10 of 58 ports in this commit are shown above. )
multimedia/mythtv: Update to 30.0 and unbreak
Changes: https://www.mythtv.org/wiki/Release_Notes_-_30
PR: 234551
Submitted by: fernando.e.vilas@gmail.com
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
Thu, 5 Apr 2018
|
[ 20:13 jhale ] (Only the first 10 of 40 ports in this commit are shown above. )
Update sysutils/libcdio to 2.0.0
- Add regression tests
Update multimedia/vcdimager to 2.0.1
- Previous version is incompatible with new libcdio API; update was neccesary
- Add regression tests
- Fix LICENSE
- Sort pkg-plist
- Update WWW in pkg-descr
Bump PORTREVISON on dependent ports due to libcdio shared libary increase
Changes
(libcdio): http://git.savannah.gnu.org/cgit/libcdio.git/plain/NEWS?h=release-2.0.0
Changes (vcdimager): https://github.com/rocky/vcdimager/blob/3b56705/NEWS
Differential Revision: https://reviews.freebsd.org/D14469
|
Sun, 25 Mar 2018
|
[ 17:09 jhale ] (Only the first 10 of 77 ports in this commit are shown above. )
Update multimedia/mythtv and related ports to 29.1 [1]
Convert multimedia/mythtv-frontend to a slave port of multimedia/mythtv
which should make future updates much easier.
Upstream security patches have been added to address known
vulnerabilities in the bundled ffmpeg 3.2.
PR: 225652 (initial patches to update to 29.0) [1]
Submitted by: <lucylangthorne55@gmail.com> [1]
Differential Revision: https://reviews.freebsd.org/D14563
|
Thu, 24 Nov 2016
|
[ 09:29 amdmi3 ]
- Pet portlint
- Add LICENSE
|
Thu, 17 Nov 2016
|
[ 07:18 decke ]
Drop maintainership after more than 7 years. It's about time to pass it on.
|
Fri, 29 Apr 2016
|
[ 15:20 arved ] (Only the first 10 of 27 ports in this commit are shown above. )
Update libcdio: 0.92 -> 0.93
Udpate libcdio-paranoia: 10.2+0.90+1 -> 10.2+0.93+1
Bump PORTREVISIONs of dependents because of shared library version bump.
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
Tue, 12 Jan 2016
|
[ 14:58 decke ]
- Update to 0.27.5
|
Tue, 8 Dec 2015
|
[ 09:04 mat ] (Only the first 10 of 34 ports in this commit are shown above. )
Don't set DISTNAME when using USE_GITHUB and MASTER_SITES=GH, the
framework already sets a unique DISTNAME.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 6 May 2015
|
[ 12:57 mat ] (Only the first 10 of 56 ports in this commit are shown above. )
Update ports in the a* categories to not use GH_COMMIT.
With minor cleanups to make things simpler.
With hat: portmgr
Sponsored by: Absolight
|
Sat, 20 Dec 2014
|
[ 17:37 antoine ]
Use GH_COMMIT
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
Sun, 31 Aug 2014
|
[ 16:36 tijl ] (Only the first 10 of 83 ports in this commit are shown above. )
math/fftw3:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Use MAKE_CMD
|
Sat, 9 Aug 2014
|
[ 10:06 arved ] (Only the first 10 of 25 ports in this commit are shown above. )
Chase library dependencies after libcdio <-> libcdio-paranoia split
PR: 192271
|
Mon, 18 Nov 2013
|
[ 12:03 decke ] (Only the first 10 of 34 ports in this commit are shown above. )
- Update to 0.27
- Add staging support
- Convert optional dependencies to new format
- Add a few clang patches but switch to USE_GCC=any because there's quite some
work left (contributors?)
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
Tue, 27 Aug 2013
|
[ 13:37 decke ] (Only the first 10 of 13 ports in this commit are shown above. )
- Update to 0.26.1
|
Sun, 9 Jun 2013
|
[ 19:30 naddy ] (Only the first 10 of 67 ports in this commit are shown above. )
* Major update to FLAC 1.3.0, including shared library bumps.
* Chase the update in dependent ports.
PR: 179072
|
Sat, 27 Oct 2012
|
[ 13:24 decke ] (Only the first 10 of 23 ports in this commit are shown above. )
- Update to 0.26.0
- Convert to OptionsNG
- Force binutils from ports for 7.x/8.x because binutils from base is too old
- Trim Makefile headers
Feature safe: yes
|
Sat, 4 Aug 2012
|
[ 08:11 decke ]
- Update to 0.25.2
|
Thu, 19 Jul 2012
|
[ 20:15 naddy ] (Only the first 10 of 187 ports in this commit are shown above. )
libogg.so.8: Bump PORTREVISION for ports that depend on libogg,
directly or indirectly (via libvorbis, libtheora).
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
Thu, 10 May 2012
|
[ 08:21 decke ] (Only the first 10 of 28 ports in this commit are shown above. )
- Update to 0.25
- Fix mythbackend rc script to start after mysql
- Add HOME env variable for mythbackend to find it's home directory
|
Sat, 18 Feb 2012
|
[ 10:18 mva ] (Only the first 10 of 537 ports in this commit are shown above. )
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
|
Wed, 1 Feb 2012
|
[ 14:51 decke ] (Only the first 10 of 12 ports in this commit are shown above. )
- Update to 0.24.2
|
Mon, 17 Oct 2011
|
[ 10:08 bf ] (Only the first 10 of 72 ports in this commit are shown above. )
- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)
Suggestions and patches from: ache, C. Burns, wen
|
Sun, 22 May 2011
|
[ 17:07 decke ]
- Update again because they rerolled the distfile and fixed the directory
structure
- Remove WRKSRC
- Bump PORTREVISION
Reported by: Ashley Diamond <ash@diamondbsd.com>
|
Fri, 20 May 2011
|
[ 12:41 decke ]
- Update to 0.24.1
|
Tue, 4 Jan 2011
|
[ 17:49 decke ] (Only the first 10 of 24 ports in this commit are shown above. )
- Update to 0.24
- Remove MD5 checksum
|
Wed, 8 Dec 2010
|
[ 18:34 decke ]
- Update MythTV MASTER_SITES for old releases
Noticed by: The Distilator
|
Fri, 6 Aug 2010
|
[ 09:27 decke ] (Only the first 10 of 14 ports in this commit are shown above. )
- Update to 0.23.1
Approved by: miwi (mentor)
|
Mon, 21 Jun 2010
|
[ 13:47 decke ]
MythMusic is a sophisticated MythTV plugin that allows you to
play and manage music and audio files .i.e MP3, Ogg, FLAC,
wav etc. It is specifically designed to be operated by a normal
remote control.
WWW: http://www.mythtv.org/wiki/MythMusic
Approved by: beat (co-mentor)
Feature safe: yes
|
Number of commits found: 44 |