| non port: audio/rhythmbox/Makefile |
|
SVNWeb
|
Number of commits found: 198 (showing only 100 on this page) |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 26 Aug 2022
|
[ 17:02 Tobias C. Berner (tcberner) ] d9b0d9a (Only the first 10 of 165 ports in this commit are shown above. )
framework: switch tree to using vala.mk
PR: 249940
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 213b0b7 (Only the first 10 of 561 ports in this commit are shown above. )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 29 Jun 2022
|
[ 06:35 Charlie Li (vishwin) ] 8839c71
audio/rhythmbox: fix PYTHON option
While here, remove no longer used libmusicbrainz5, add USE_GNOME=gdkpixbuf2
from linkage detection and minor cleanups
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D35650
|
|
Sat, 25 Jun 2022
|
[ 20:26 Baptiste Daroussin (bapt) ] 66a9e2a
audio/rhythmbox: update to 3.4.6
Temporary disable the LIRC option it requires an update to lirc
whcih I cannot perform safely due to the lack of devices to test
|
|
Sat, 30 Apr 2022
|
[ 08:03 Tobias C. Berner (tcberner) ] ca3f925 (Only the first 10 of 133 ports in this commit are shown above. )
framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree
Differential Revision: https://reviews.freebsd.org/D35097
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Sun, 10 Oct 2021
|
[ 19:44 Baptiste Daroussin (bapt) ] 2c672a4 (Only the first 10 of 586 ports in this commit are shown above. )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 8 Feb 2021
|
[ 14:19 bapt ]  
Move rhythmbox to gnome@
Discussed with: marcus (maintainer)
|
[ 09:46 bapt ]
Remove a false dependency on libhal in case MTP option is selected
|
|
Sun, 7 Feb 2021
|
[ 05:08 bapt ]
Update to 3.4.4
|
|
Thu, 21 Jan 2021
|
[ 14:37 jhale ] (Only the first 10 of 35 ports in this commit are shown above. )
comms/libimobiledevice: Update to 1.3.0
comms/libusbmuxd: Update to 2.0.2
comms/usbmuxd: Update to 1.1.1
devel/libplist: Update to 2.2.0
Resurrect comms/py-libimobiledevice, update to 1.3.0
Resurrect devel/py-libplist, update to 2.2.0
Take maintainership of the ports listed above.
Bump PORTREVISION on consumers and adjust LIB_DEPENDS to new versioned library
names.
|
|
Mon, 12 Oct 2020
|
[ 14:20 bapt ] (Only the first 10 of 13 ports in this commit are shown above. )
Update libsoup to 2.72.0
Merge back libsoup and libsoup-gnome, they both have the same dependencies
now, and they are more complicated to split now that they switched to meson
Bump portrevision of dependant ports
|
|
Mon, 4 Nov 2019
|
[ 20:39 zeising ] (Only the first 10 of 82 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories a
Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'a'.
|
|
Wed, 3 Jul 2019
|
[ 20:40 antoine ]
Switch back to non-legacy databases/tdb
|
|
Thu, 20 Jun 2019
|
[ 18:53 antoine ]
Depend on legacy libtdb
Reported by: pkg-fallout
|
|
Sat, 3 Nov 2018
|
[ 11:58 tijl ] (Only the first 10 of 62 ports in this commit are shown above. )
Update GStreamer to 1.14.4.
PR: 231406
Submitted by: Greg V <greg@unrelenting.technology>
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Sat, 29 Sep 2018
|
[ 08:04 riggs ] (Only the first 10 of 75 ports in this commit are shown above. )
Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l
|
|
Tue, 11 Sep 2018
|
[ 18:34 zeising ] (Only the first 10 of 331 ports in this commit are shown above. )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
|
Mon, 10 Sep 2018
|
[ 13:14 mat ] (Only the first 10 of 995 ports in this commit are shown above. )
Add DOCS options to ports that should have one.
Also various fixes related to said option.
PR: 230864
Submitted by: mat
exp-runs by: antoine
|
|
Tue, 31 Jul 2018
|
[ 18:41 zeising ] (Only the first 10 of 254 ports in this commit are shown above. )
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
|
|
Mon, 8 Jan 2018
|
[ 14:56 marcus ]
Update to 3.4.2.
PR: 223303
Submitted by: cpm
|
|
Wed, 3 Jan 2018
|
[ 13:22 mat ] (Only the first 10 of 22 ports in this commit are shown above. )
Cleanup Mk/Uses/gnome.mk.
- Remove the use of comp_DETECT.
- Remove all comp_DETECT variables.
- Remove a use of comp_DETECT outside of gnome.mk
- Remove py3gobject3.
- Have ports depending directly on devel/py-gobject3 use gnome to do it.
PR: 224618
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D13550
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 4 Oct 2017
|
[ 11:54 bapt ]
Remove useless .pre.mk/.post.mk
|
|
Sat, 20 May 2017
|
[ 09:29 kwm ] (Only the first 10 of 11 ports in this commit are shown above. )
svn copy grilo -> grilo2 and grilo-plugins -> grilo-plugins2
* These is done so grilo and grilo-plugins can be updated to 0.3.x and
the users of grilo can switch when they are ready.
* Chase grilo users to the new locations.
|
|
Sun, 5 Feb 2017
|
[ 11:14 sunpoet ] (Only the first 10 of 23 ports in this commit are shown above. )
Move devel/libcheck to devel/check
- Bump PORTREVISION for dependent ports
|
|
Sat, 7 Jan 2017
|
[ 21:42 sunpoet ] (Only the first 10 of 40 ports in this commit are shown above. )
Add more PLIST_SUB to Mk/Uses/python.mk
- Add PYTHON_PYOEXTENSION and PYTHON_SUFFIX
- Add PYTHON2 and PYTHON3
- Respect PYTHON_VERSION
- Rename PYOEXTENSION to PYTHON_PYOEXTENSION
This change would help:
- Build databases/postgresql*-plpython with Python 3
(It has PLIST issue since bsd.python.mk to Uses/python.mk transition)
- Simplify Makefile
PR: 205807
Differential Revision: https://reviews.FreeBSD.org/D4758
Exp-run by: antoine
|
|
Fri, 21 Oct 2016
|
[ 12:51 mat ] (Only the first 10 of 718 ports in this commit are shown above. )
${RM} already has -f.
PR: 213570
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
|
|
Wed, 12 Oct 2016
|
[ 19:01 rm ]
audio/rhythmbox: fix packaging with python 3.5
- while here fix configure warnings by adjusting configure option names
- utilize USES=localbase
- bump PORTREVISION
PR: 213342
Approved by: portmgr (blanket approval)
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 14 Feb 2016
|
[ 18:57 kwm ] (Only the first 10 of 460 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.
The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/
This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.
GDM is still at version 3.16 due to some issues.
Bump mate-themes to use the gtk 3.18 version of the themes.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 207006
|
|
Sun, 14 Jun 2015
|
[ 17:55 jhale ] (Only the first 10 of 13 ports in this commit are shown above. )
- Update audio/libmusicbrainz5 to 5.1.0
- Fix a crash in audio/sound-juicer caused by libmusicbrainz5 (fix added
upstream, but not in this release) [1]
- Bump PORTREVISION on dependent ports
PR: 196959 [1]
Submitted by: Pete Johanson <peter@peterjohanson.com> [1]
|
|
Fri, 12 Jun 2015
|
[ 15:39 kwm ]
Fix py3-libpeas line.
Submitted by: Freshports sanity checker
|
[ 15:25 kwm ]
Chase libpeas change in r389277.
Disable and don't build plugins that don't work.
* Context - needs python 3 version of textproc/py-mako
* rbzeitgeist - needs python 3 of the zeitgeist bindings.
(The python2 version is bundled in the zeitgeist port)
|
|
Sun, 12 Apr 2015
|
[ 09:57 kwm ]
Don't depend on other ports to drag in py3-gobject3.
|
|
Fri, 10 Apr 2015
|
[ 12:50 kwm ] (Only the first 10 of 24 ports in this commit are shown above. )
Mini gnome update. Next stop GNOME 3.16!
Update rhythmbox to 3.2.
Update gnome-tweak-tool to 3.14.3.
Update gnome-mines to 3.14.2.
Update eog to 3.14.4.
Update geary to 0.10.0.
Update tracker to 1.2.6.
Update gdm to 3.14.2.
Update gtk30 to 3.14.12.
Update gtksourceview3 to 3.14.4.
Obtained from: GNOME dev repo
|
|
Fri, 27 Feb 2015
|
[ 16:35 marcus ]
Add a dependency on databases/tdb and make brasero support optional
(default: ON).
PR: 197518
Submitted by: kvedulv@kvedulv.de
|
|
Sat, 10 Jan 2015
|
[ 23:15 demon ] (Only the first 10 of 39 ports in this commit are shown above. )
Switch default python3 version from 3.3 to 3.4.
Bump PORTREVISIONs for the affected ports.
Exp-run by: antoine
|
|
Wed, 19 Nov 2014
|
[ 11:49 kwm ] (Only the first 10 of 1460 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.
This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.
Apart from updating ports to newer versions
GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.
Shell Extensions can be installed via https://extensions.gnome.org/ , we have (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 19 Oct 2014
|
[ 07:33 mva ] (Only the first 10 of 36 ports in this commit are shown above. )
- Convert ports from audio/ to new USES=python
Reviewed by: portmgr (implicit)
|
|
Sun, 28 Sep 2014
|
[ 23:02 avilla ]
- Chase libplist shlib bump.
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Mon, 11 Aug 2014
|
[ 13:59 tijl ] (Only the first 10 of 17 ports in this commit are shown above. )
comms/lirc:
- Fix missing -lusb [1]
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Use @sample
Reported by: sbruno [1]
|
|
Sat, 9 Aug 2014
|
[ 15:44 mva ] (Only the first 10 of 31 ports in this commit are shown above. )
Convert the Python framework bits to USES=python.
Please use USES=python instead of USE_PYTHON.
USE_PYTHON=yes becomes USES=python
USE_PYTHON=2.7+ becomes USES=python:2.7+
USE_PYTHON_BUILD=3.3 becomes USES=python:3.3,build
...
A new PYTHON_FEATURES variable was added, which enables certain features for a
port and replaces some knobs at the same time;
PYTHON_FEATURES=distutils replaces USE_PYDISTUTILS
PYTHON_FEATURES=autoplist replaces PYDISTUTILS_AUTOPLIST
PYTHON_FEATURES=py3kplist replaces PYTHON_PY3K_PLIST_HACK (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 23 Jul 2014
|
[ 07:02 amdmi3 ]
- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
Approved by: portmgr blanket
|
|
Sat, 19 Jul 2014
|
[ 18:15 tijl ]
New LIB_DEPENDS syntax
Reported by: Mike Harding <mvharding@gmail.com>
|
|
Fri, 18 Jul 2014
|
[ 11:02 tijl ] (Only the first 10 of 26 ports in this commit are shown above. )
audio/rhythmbox: drop :keepla
multimedia/banshee: add USES=libtool and INSTALL_TARGET=install-strip
multimedia/libmtp: add USES=libtool and INSTALL_TARGET=install-strip
multimedia/libaacs:
- USES=libtool pathfix
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS
- Remove plist target, superseded by makeplist
multimedia/libbluray:
- USES=libtool pathfix
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS
- Remove plist target, superseded by makeplist
- Use OPTIONS_SUB
- Replace patch with post-patch command
Bump dependent ports
|
|
Wed, 11 Jun 2014
|
[ 14:50 tijl ] (Only the first 10 of 297 ports in this commit are shown above. )
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 25 Apr 2014
|
[ 23:46 bapt ]
Stagify brasero
Convert to USES=libtool
Chase shlib number change
Clean up a bit chased ports
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 9 Apr 2014
|
[ 13:28 bapt ]
Support stage
USES=libtools
add missing USES=desktop-file-utils
Convert to USES=webplugin
strip binaries
|
|
Mon, 10 Mar 2014
|
[ 09:53 makc ]
- Chase libmtp move
|
|
Wed, 11 Dec 2013
|
[ 14:35 bapt ] (Only the first 10 of 268 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio
With hat: portmgr
|
|
Thu, 14 Nov 2013
|
[ 18:22 bapt ]
Revert badly tested conversion to USES=webplugin
Pointyhat to: bapt
|
|
Wed, 13 Nov 2013
|
[ 08:09 bapt ]
Convert to USES=webplugin
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Thu, 5 Sep 2013
|
[ 17:01 antoine ]
Add an explicit dependency on pkgconf
Approved by: portmgr (bapt)
|
|
Fri, 30 Aug 2013
|
[ 23:01 bapt ] (Only the first 10 of 222 ports in this commit are shown above. )
Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix
|
|
Tue, 4 Jun 2013
|
[ 15:13 bapt ]
Convert to new options framework
|
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
|
Tue, 26 Mar 2013
|
[ 16:13 miwi ]
- Chase libmtp shlib bump
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 25 May 2012
|
[ 15:14 miwi ]
- Chase libmtp shlib bump
|
|
Fri, 27 Apr 2012
|
[ 07:38 marcus ]
Disable obsolete Musicbrainz support.
PR: 165839
Submitted by: Jason E. Hale <bsdkaffee@gmail.com>
|
|
Mon, 6 Feb 2012
|
[ 04:23 marcus ]
Fix the status icon plugin with the latest libnotify changes.
Submitted by: sbruno
PR: 164300
Obtained from: GNOME git
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Tue, 23 Aug 2011
|
[ 18:39 kwm ] (Only the first 10 of 148 ports in this commit are shown above. )
Chase libnotify, libproxy and webkit-gtk2 shlib changes, and fix build where
needed.
|
|
Tue, 15 Mar 2011
|
[ 15:05 danfe ]
Chase libgpod shlib version bump.
|
|
Sat, 26 Feb 2011
|
[ 22:11 nox ] (Only the first 10 of 31 ports in this commit are shown above. )
- Update comms/lirc to 0.9.0p1_4 in order to be able to use the lirc
support in webcamd svn (for mceusb-based receivers/transmitters and
USB DVB tuner remotes supported by the Linux code), and enable
support for a few more USB devices while we're at it tho of those
only an FTDI-based one was tested:
http://www.huitsing.nl/irftdi/ [1]
- Fix plist for audio/rhythmbox and multimedia/totem and
add missing LIRC_{CFLAGS,LIBS} variables to CONFIGURE_ENV for
multimedia/xine when building them with (optional) lirc support. [2]
- Chase liblirc_client shlib version bump for ports depdending on it
and bump PORTREVISIONs for ports depending on it by default.
Approved by: portmgr (miwi) [2]
Thanks to: Warren Block <wblock@wonkity.com> for testing [1]
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 20 Nov 2010
|
[ 15:37 kwm ] (Only the first 10 of 609 ports in this commit are shown above. )
Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 27 Sep 2010
|
[ 04:50 marcus ]
Fix runtime with Python 2.6.6.
Submitted by: Thomans Gellekum <Thomas.Gellekum@gmx.de>
Obtained from: GNOME git
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Mon, 10 May 2010
|
[ 21:19 kwm ] (Only the first 10 of 772 ports in this commit are shown above. )
Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues. (Only the first 15 lines of the commit message are shown above )
|
[ 13:07 makc ]
Chase audio/libmtp update.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Sun, 28 Feb 2010
|
[ 23:03 marcus ]
Update to 0.12.7.
Feature safe: yes
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 28 Nov 2009
|
[ 20:06 marcus ] (Only the first 10 of 823 ports in this commit are shown above. )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 22 Nov 2009
|
[ 22:06 marcus ]
Update to 0.12.6.
|
|
Sat, 19 Sep 2009
|
[ 17:18 marcus ]
Update to 0.12.5.
Feature safe: yes
|
|
Sun, 23 Aug 2009
|
[ 17:47 marcus ]
Update to 0.12.4.
|
|
Fri, 7 Aug 2009
|
[ 17:03 miwi ]
- Chase audio/libgpod shlib bump
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Sun, 5 Jul 2009
|
[ 18:16 marcus ]
Update to 0.12.3.
|
|
Wed, 3 Jun 2009
|
[ 02:58 marcus ]
Update to 0.12.2.
|
|
Wed, 29 Apr 2009
|
[ 05:35 marcus ]
Update to 0.12.1.
|
|
Fri, 10 Apr 2009
|
[ 18:20 kwm ]
Correct plist for webplugin.
Submitted by: QA tindy
|
[ 05:56 marcus ] (Only the first 10 of 480 ports in this commit are shown above. )
Presenting GNOME 2.26 for FreeBSD. See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
|
|
Sat, 21 Mar 2009
|
[ 18:36 marcus ]
Update to 0.12.0.
|
|
Mon, 2 Feb 2009
|
[ 01:36 araujo ] (Only the first 10 of 159 ports in this commit are shown above. )
- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
MASTER_SITE_SUBDIR when possible.
PR: ports/125243
Submitted by: pgollucci
Reworked by: myself
Tested on: pointyhat exp-run (pav)
|
|
Sat, 10 Jan 2009
|
[ 05:22 marcus ] (Only the first 10 of 718 ports in this commit are shown above. )
Presenting GNOME 2.24 for FreeBSD.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 5 Jan 2009
|
[ 19:04 delphij ] (Only the first 10 of 249 ports in this commit are shown above. )
Bump PORTREVISION's after OpenLDAP update.
Suggested by: rafan
|
|
Sun, 13 Jul 2008
|
[ 17:44 marcus ]
Add CONFLICTS.
|
|
Fri, 6 Jun 2008
|
[ 13:07 edwin ] (Only the first 10 of 345 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Number of commits found: 198 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.