non port: audio/rubberband/Makefile |
SVNWeb
|
Number of commits found: 26 |
Fri, 21 Oct 2022
|
[ 11:56 Daniel Engberg (diizzy) ] 176bea4
audio/rubberband: Update to 3.1.0
Changelog: https://github.com/breakfastquay/rubberband/blob/v3.1.0/CHANGELOG
PR: 266772
Approved by: portmgr (maintainer timeout, 2+ weeks)
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Thu, 28 Jul 2022
|
[ 19:04 Yuri Victorovich (yuri) ] 1a135eb
audio/rubberband: Update 2.0.2 -> 3.0.0
Changelog: https://github.com/breakfastquay/rubberband/blob/v3.0.0/CHANGELOG
PR: 265219
Approved by: acm@ (maintainer's timeout; 14 days)
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 213b0b7 (Only the first 10 of 561 ports in this commit are shown above. )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com> (Only the first 15 lines of the commit message are shown above )
|
Sun, 13 Feb 2022
|
[ 19:43 Daniel Engberg (diizzy) ] 5ab3936
audio/rubberband: Update to 2.0.2
Changelog: https://github.com/breakfastquay/rubberband/blob/default/CHANGELOG
PR: 261424
Reviewed by: acm (maintainer)
|
Wed, 8 Dec 2021
|
[ 10:48 Daniel Engberg (diizzy) ] 77687e9
audio/rubberband: Update to 2.0.0
Changelog: https://github.com/breakfastquay/rubberband/blob/default/CHANGELOG
Approved by: lbartoletti (mentor), maintainer timeout (3+ weeks)
Differential Revision: https://reviews.freebsd.org/D32989
|
Fri, 25 Jun 2021
|
[ 14:59 Joseph Mingrone (jrm) Author: Daniel Engberg ] 48d7a1d
audio/rubberband: Update to 1.9.2
PR: 256525
Approved by: acm (maintainer, timeout)
|
Sun, 6 Jun 2021
|
[ 13:07 Joseph Mingrone (jrm) Author: Daniel Engberg ] 40bc82d
audio/rubberband: Update to 1.9.1
Changes in Rubber Band v1.9.1
* Switch build system from Makefiles and Visual Studio project to
Meson/Ninja for all platforms. There are still Makefiles and VS
projects included in otherbuilds/ for those who wish to use them to
build the static library directly
* Make various fixes to improve sound quality when pitch-shifting
dynamically in real-time (requires libsamplerate)
* Fix floating-point exception when a very very long stretch factor
is presented
(Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Mon, 15 Mar 2021
|
[ 23:17 nc ]
audio/rubberband: Update to 1.9.0
PR: 251861
Approved by: maintainer timeout (3 months)
|
Wed, 14 Nov 2018
|
[ 21:19 acm ]
- Bump PORTREVISION
- audio/rubberband : Take maintainership
|
Tue, 17 Jul 2018
|
[ 06:35 yuri ]
audio/rubberband: Update 1.8.1 -> 1.8.2
Port changes:
* Change to DISTVERSION
* Update MASTER_SITES
* Add LICENSE_FILE
* Update COMMENT
* Add lv2 to BUILD_DEPENDS
* Remove RUN_DEPENDS
* Remove CFLAGS/CPPFLAGS/LDFLAGS
* Remove post-install - now it strips by itself
* Submitted patches as a pull request, ass PATCH_SITES/PATCHFILES
* Update WWW
|
Fri, 21 Oct 2016
|
[ 15:21 mat ] (Only the first 10 of 354 ports in this commit are shown above. )
Use USES=pathfix where applicable.
PR: 213195
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D8093
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
Sun, 31 Aug 2014
|
[ 16:36 tijl ] (Only the first 10 of 83 ports in this commit are shown above. )
math/fftw3:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Use MAKE_CMD
|
Fri, 27 Jun 2014
|
[ 16:05 miwi ]
- Update to 1.8.1
PR: 190890
|
Sun, 25 May 2014
|
[ 09:01 miwi ]
- Convert to tar:bzip2
- Drop maintainership
|
Thu, 30 Jan 2014
|
[ 15:58 miwi ]
- Stage support
|
Wed, 11 Dec 2013
|
[ 14:35 bapt ] (Only the first 10 of 268 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio
With hat: portmgr
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
Fri, 30 Aug 2013
|
[ 23:01 bapt ] (Only the first 10 of 222 ports in this commit are shown above. )
Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix
|
Mon, 22 Apr 2013
|
[ 23:19 bapt ] (Only the first 10 of 57 ports in this commit are shown above. )
Convert USE_PKGCONFIG -> USES=pkgconf for audio category
|
Sun, 17 Mar 2013
|
[ 16:44 eadler ] (Only the first 10 of 16 ports in this commit are shown above. )
Fix minor nit: use the canconical FreeBSD.org form for email addresses.
This was causing me issues when attempting to gather certain statistics.
While here trim header
Approved by: miwi, adrian, tj
No objection from: db, bjk, cperciva, scheidell, osa
|
Sat, 6 Oct 2012
|
[ 11:06 bapt ]
convert libcddb and libsamplerate to only build depend on pkgconf, track
dependency impact
|
Tue, 7 Feb 2012
|
[ 06:37 miwi ]
Rubber Band Library is a high quality software library for audio time-stretching
and pitch-shifting. It permits you to change the tempo and pitch of an audio
stream or recording dynamically and independently of one another.
WWW: http://breakfastquay.com/rubberband/
PR: ports/164641
Submitted by: mathias.picker@gmx.de
|
Number of commits found: 26 |