non port: audio/sdl2_mixer/Makefile |
SVNWeb
|
Number of commits found: 41 |
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy) ] feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above. )
audio/opus: bump consumers after update to 1.4
|
Tue, 7 Feb 2023
|
[ 18:43 Dmitry Marakasov (amdmi3) ] 46b71e7
audio/sdl2_mixer: update 2.6.2 → 2.6.3
|
Sun, 25 Sep 2022
|
[ 20:14 Christian Weisgerber (naddy) ] 1e5aaab (Only the first 10 of 76 ports in this commit are shown above. )
audio/flac: bump port revision of consumers after update to 1.4.1
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 31 Aug 2022
|
[ 10:15 Dmitry Marakasov (amdmi3) ] 513837b
audio/sdl2_mixer: update 2.6.1 → 2.6.2
- Fix installation with WITH_DEBUG
- Update pkg-descr
|
Thu, 21 Jul 2022
|
[ 12:40 Dmitry Marakasov (amdmi3) ] 6b4c8d1
audio/sdl2_mixer: update 2.0.4 → 2.6.1
|
Mon, 11 Jul 2022
|
[ 21:46 Po-Chuan Hsieh (sunpoet) ] 2bbe718 (Only the first 10 of 48 ports in this commit are shown above. )
audio/libmad: Set SONAME to libmad.so.0 instead of libmad.so.0.16.2
- Bump PORTREVISION of dependent ports for shlib change
- Bump PORTREVISION for package change
|
Sat, 27 Nov 2021
|
[ 10:09 Thomas Zander (riggs) ] e40e82b (Only the first 10 of 36 ports in this commit are shown above. )
audio/fluidsynth: Update to upstream version 2.2.4
MFH: 2021Q4
|
Mon, 4 Oct 2021
|
[ 04:56 Thomas Zander (riggs) ] 4c2db26 (Only the first 10 of 37 ports in this commit are shown above. )
audio/fluidsynth: Update to upstream version 2.2.3
MFH: 2021Q4
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 8 Nov 2019
|
[ 09:27 tobik ] (Only the first 10 of 129 ports in this commit are shown above. )
a-b: Add missing USES={gnome,php,sdl,xorg}
|
Sun, 29 Sep 2019
|
[ 10:04 riggs ] (Only the first 10 of 26 ports in this commit are shown above. )
Chase update to audio/fluidsynth; bump PORTREVISION of dependent ports
PR: 240890
|
Sun, 21 Apr 2019
|
[ 19:08 sunpoet ]
Update MASTER_SITES and WWW
Approved by: portmgr (blanket)
|
Sat, 2 Mar 2019
|
[ 16:55 riggs ] (Only the first 10 of 25 ports in this commit are shown above. )
Chase update of fluidsynth to 2.0.3
PR: 233448
|
Tue, 5 Feb 2019
|
[ 17:42 amdmi3 ]
- Update to 2.0.4
- Disable dynamic linking
- Regroup options
|
Fri, 1 Jun 2018
|
[ 22:16 riggs ] (Only the first 10 of 28 ports in this commit are shown above. )
Bump PORTREVISIONS to chase update to audio/fluidsynth 1.1.11
PR: 228265
|
Mon, 5 Feb 2018
|
[ 16:24 amdmi3 ] (Only the first 10 of 13 ports in this commit are shown above. )
Take maintainership of SDL/SDL2 ports
|
Sun, 22 Jan 2017
|
[ 22:27 rene ] (Only the first 10 of 56 ports in this commit are shown above. )
Reset mva@'s ports, he handed in his ports bit.
|
Wed, 6 Apr 2016
|
[ 15:01 amdmi3 ] (Only the first 10 of 16 ports in this commit are shown above. )
- Update sdl20 and satellite libraries to latest versions
sdl2: 2.0.3 -> 2.0.4
sdl2_image: 2.0.0 -> 2.0.1
sdl2_mixer: 2.0.0 -> 2.0.1
sdl2_net: 2.0.0 -> 2.0.1
sdl2_ttf: 2.0.12 -> 2.0.14
- Add LICENSE_FILE
- Strip libraries
- Switch to USES=localbase where applicable
PR: 207671
Submitted by: devnexen@gmail.com, amdmi3
Approved by: maintainer timeout (mva, 1 month)
Exp-run by: antoine
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
Thu, 10 Mar 2016
|
[ 00:18 jbeich ]
audio/sdl{,2}_mixer: sync and add missing option descriptions
PR: 202689
|
[ 00:17 jbeich ]
audio/sdl{,2}_mixer: fix VORBIS=on logic after r410689
PR: 202689
Reported by: antoine
|
Wed, 9 Mar 2016
|
[ 05:18 jbeich ]
audio/sdl{,2}_mixer: add TREMOR option
TREMOR is enabled by default on platforms without hardware floating point.
PR: 202689
Approved by: maintainer timeout (6 months)
|
Tue, 1 Mar 2016
|
[ 16:41 danfe ]
Add FLUIDSYNTH option generic description, and remove ad-hoc setting in
ports where it is applicable (alongside with other shared descriptions).
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
Tue, 15 Jul 2014
|
[ 18:58 tijl ] (Only the first 10 of 23 ports in this commit are shown above. )
- Convert multimedia/smpeg* to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
|
Mon, 9 Jun 2014
|
[ 11:21 olgeni ] (Only the first 10 of 120 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories A-C.
CR: D196
Approved by: portmgr (bapt)
|
Wed, 4 Jun 2014
|
[ 23:00 amdmi3 ]
- Switch to USES=libtool, drop .la files
Approved by: portmgr blanket
|
Thu, 20 Mar 2014
|
[ 19:01 mva ]
- Unbreak build after the recent audio/libmodplug update
Reported by: pkg-fallout
|
Sun, 17 Nov 2013
|
[ 12:33 mva ] (Only the first 10 of 12 ports in this commit are shown above. )
- Switch devel/sdl20 to use the autotools-based configuration, since the
cmake-based one is not maintained that well
- Fix library naming to ensure backwards compatibility on minor version
changes
- Bump the PORTREVISION on ports depending on devel/sdl20, since its
shared library name changed
PR: ports/183975
Submitted by: Jan Kokemuller <jan.kokemueller@gmail.com>
|
Wed, 13 Nov 2013
|
[ 21:36 mva ]
- Add MP3 support via multimedia/smpeg2 (new option SMPEG)
PR: ports/183364
Submitted by: Vladimir Kondratiev <wulf@mail.mipt.ru>
|
Wed, 30 Oct 2013
|
[ 21:53 mva ]
- Fix patching the .pc installation path to avoid wrong expansions
Submitted by: many
|
Fri, 25 Oct 2013
|
[ 16:15 mva ]
- Update devel/sdl20 to version 2.0.1
- Bump PORTREVISIONs for SDL2-related ports to chase the changed SDL2
shlib version
- Enable staging support for the SDL2 ports
- Switch to new LIB_DEPENDS format for the SDL2 ports
- Add LICENSE to the SDL2 ports
- Use gmake USES for the SDL2 ports
|
Sat, 21 Sep 2013
|
[ 12:02 mva ]
- Add mikmod support for audio/sdl_mixer and audio/sdl2_mixer
- While here, simplify the OPTIONS usage
PR: ports/181695
Submitted by: Jan Beich <jbeich@tormail.org>
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
Fri, 30 Aug 2013
|
[ 23:01 bapt ] (Only the first 10 of 222 ports in this commit are shown above. )
Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix
|
Wed, 14 Aug 2013
|
[ 17:23 mva ] (Only the first 10 of 11 ports in this commit are shown above. )
SDL2 has been officially released.
- Update devel/sdl20, audio/sdl2_mixer, graphics/sdl2_image,
graphics/sdl2_ttf and net/sdl2_net to version 2.0.0
|
Sat, 6 Jul 2013
|
[ 10:25 mva ]
- Update to the latest RC
|
Fri, 21 Jun 2013
|
[ 19:56 mva ] (Only the first 10 of 24 ports in this commit are shown above. )
Welcome SDL2 to the FreeBSD ports system!
A set of new SDL2 related ports has been added, which are essentially
the same as their corresponding port for SDL1.2:
audio/sdl2_mixer
graphics/sdl2_image
graphics/sdl2_ttf
net/sdl2_net
A set of new USE_SDL knobs is available to enable SDL2 and its related
ports to be added as dependency to ports. Use either of
USE_SDL= sdl2 image2 mixer2 net2 ttf2
to pull in the specific sdl2_* or sdl20 port.
|
Number of commits found: 41 |