Number of commits found: 75

- Those ports fail to build with python3
- Add some explicit FLAVOR to dependencies where needed

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

audio/solfege: USES-= display

I don't believe xvfb has been a build requirement for years.  Solfege
builds fine without USES=display, so let's remove it.

- Remove GNOME option, according to port Changelog file this program
  is no longer GNOME app for at least few years. Also it uses
  USE_GNOME=pygnomeextras removed in r372768
- Correct spelling in COMMENT, "ear training" is used all over homepage
  and project documentation

- Add LICENSE_FILE
- Fix shebangs
- Add NO_ARCH

MFH:		2015Q2 (blanket)

- Convert ports from audio/ to new USES=python

Reviewed by:	portmgr (implicit)

audio/solfege: Update version 3.20.6 => 3.22.2 and stage

PR:		191812
Submitted by:	Ports Fury

Resetting maintainership on ports that have not been staged and without any
pending PR (related to stage)

With hat:	portmgr

Allow to build with texinfo from ports

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

Add an explicit dependency on pkgconf

Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix

Convert to USES=display

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- Update to 3.20.6

- Update to 3.20.5

- update png to 1.5.10

- Update to 3.20.4

PR:             ports/161751
Submitted by:   Bartoletti <coder@tuxfamily.org>

- Update to 3.20.2

- Update to 3.20.1

- Update to 3.20.0

- Update to 3.18.8

- Update to 3.18.7

- Update to 3.16.4

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Update to 3.16.3

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with A

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 3.15.1
- Take maintainership

Approved by:    tabthorpe (co-mentor)

- Update to 3.14.0

PR:             132466
Submitted by:   Ports Fury

- Update to 3.12.1

PR:             130942
Submitted by:   Dennis Herrmann <adox@mcx2.org>

- Update to 3.12.0

PR:             130452
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 3.10.4

PR:             123498
Submitted by:   Ports Fury

- Update to 3.10.3

PR:             122073
Submitted by:   Ports Fury

- Update to 3.10.2

PR:             120472
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Replace BUILD_DEPENDS on Xvfb and a handful of fonts with USE_DISPLAY=yes.

- Update to 3.9.0

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 3.8.1

- Update to 3.8.0

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Don't install .orig file

Submitted by:   pointyhat via kris
Approved by:    miwi (mentor, implicit)

- Fix csound interval script to use /bin/sh instead of /bin/bash
- bump PORTREVISION

Approved by:    miwi (mentor, implicit)

- Update to 3.7.0

PR:             109288
Submitted by:   Marcelo Araujo <araujo@bsdmail.org>

- Update to 3.6.4

PR:             106986
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 3.6.1

PR:             ports/106137
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to version 3.6.0.

PR:             ports/104169
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 3.4.2

PR:             ports/103141
Submitted by:   KATO Tsuguru <tkato432(at)yahoo.com>

- Update to 3.4.0

PR:             100028
Submitted by:   KATO Tsuguru <tkato432 yahoo.com>

Update to version 3.2.1

PR:             ports/99041
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 3.2.0 [1]
- Add USE_GETTEXT [2]
- Fix build without X server/DISPLAY [3]

PR:             95599
Submitted by:   KATO Tsuguru <tkato432@yahoo.com> [1]
                stefan [2]
                arved[3]
Approved by:    arved

- Update to 3.0.7

PR:             ports/94489
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 3.0.6

PR:             ports/92004
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 3.0.5

PR:             ports/90551
Submitted by:   Ports Fury

- Update to 3.0.4

PR:             ports/88557
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Bump PORTREVISION to chase the glib20 shared library update.

- Update to 3.0.3

PR:             87531
Submitted by:   Ports Fury
Approved by:    novel (mentor) (implicit)

Update to 3.0.2.

PR:             87054
Submitted by:   Ports Fury

Update to 3.0.1

PR:             86673
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update to 2.4.0

PR:             ports/80763
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 2.2.1.

PR:             ports/79465
Submitted by:   Ports Fury

Solfege wants py-libgtkhtml support, which is now part of py-gnome-extras.
So, change the pygnome2 dependency to pygnomeextras.

Also, utilize USE_GNOME as long as we're here.

Approved by:    portmgr (marcus)

Bump PORTREVISION to chase the glib20 shared lib version change.

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

- Update to latest version
- Use PKGNAMESUFFIX to note that FreeBSD doesn't support sound (yet?)
- Avoid runtime error on startup by setting the default output to 'fake-synth'

Closes:         ports/50795
Submitted by:   Steve Coltrin

- Update to version 2.0.5

PR:             ports/65363
Submitted by:   Ports Fury

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

- Update to version 2.0.4

PR:             ports/61952
Submitted by:   Ports Fury

Now gettext 0.12.1 is gettext-old.

Move solfege port to audio category, which is more descriptive,
after repo copy by joe.

Approved by:    portmgr

Number of commits found: 75

8 vulnerabilities affecting 50 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-09-23 10:02:25