| non port: audio/xoscope/Makefile |
|
SVNWeb
|
Number of commits found: 17 |
|
Thu, 2 Mar 2023
|
[ 05:23 Tobias C. Berner (tcberner)  ]    fa81a4f (Only the first 10 of 1168 ports in this commit are shown above.  )
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments. (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 24 Aug 2020
|
[ 15:58 db ]  
- fix under clang11
- add LICENSE
- pet portlint
|
|
Mon, 4 Nov 2019
|
[ 20:39 zeising ] (Only the first 10 of 82 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories a
Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'a'.
|
|
Tue, 9 Jan 2018
|
[ 07:40 mat ] (Only the first 10 of 46 ports in this commit are shown above. )
Remove support for variables that have been deprecated for a while.
variables deprecation revision
WITHOUT_NLS 2013-12-13 r336337
WITH_/WITHOUT_ 2014-02-24 r345870
NOPORT(DOC|EXAMPLE)S 2014-04-19 r351587
WITH_BDB_VER 2016-05-02 r414444
OVERRIDE_LINUX_BASE_PORT 2016-09-05 r421387
WITH_OPENSSL_(BASE|PORT) 2016-06-16 r416965
While there, add an ERROR variable that works like DEV_ERROR, but for
user facing errors, and move NOPORTDOCS,
NOPORTEXAMPLES and WITHOUT_NLS to it.
Cleanup bsd.sanity.mk a bit.
Fix fallout.
PR: 224613
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D13490
|
|
Thu, 8 Dec 2016
|
[ 19:52 tijl ] (Only the first 10 of 551 ports in this commit are shown above. )
Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Tue, 29 Jul 2014
|
[ 19:11 adamw ] (Only the first 10 of 436 ports in this commit are shown above. )
Convert a bunch of EXTRACT_SUFX=... into USES=tar:...
Approved by: portmgr (not really, but touches unstaged ports)
|
|
Tue, 5 Nov 2013
|
[ 23:28 db ]
- As described by Mamoru Iwaki <1wkmmr@gmail.com> in email
> I have just looked around audio/xoscope, not compiling it yet. Then, I
> found a strange line in files/patch-ser_unix.c, as follows:
>
> 34 +#ifdef BSD
> 35 + if (tcgetattr(fd, &svbuf) < 0 ) {
> 36 +#else
> 37 if (ioctl(fd, TCSETA, &svbuf) < 0) {
> 38 +#endif
>
> I wonder tcgetattr(...) in line 35 should be tcsetattr(...).
It should be, but the fd involved was for hardware that is no longer
made but it is a trivial fix so fixed anyway.
- Convert to stagedir while in here.
Submitted by: 1wkmmr@gmail.com (for tcsetattr note)
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Mon, 2 Sep 2013
|
[ 21:16 bapt ] (Only the first 10 of 30 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
|
Fri, 30 Aug 2013
|
[ 23:01 bapt ] (Only the first 10 of 222 ports in this commit are shown above. )
Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix
|
|
Mon, 5 Nov 2012
|
[ 00:05 db ]
- upgrade to version 2.0
- unbreak on x64
- clean up header
Feature safe: yes
|
|
Sat, 22 Aug 2009
|
[ 00:13 amdmi3 ] (Only the first 10 of 195 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with A
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 28 Jul 2008
|
[ 18:56 db ]
- xoscope is a digital oscilloscope using input from a sound card or EsounD
and/or a ProbeScope/osziFOX and will soon support Bitscope hardware.
Includes 8 signal displays, variable time scale, math, memory, measurements,
and file save/load.
- Unfortunately will not work on amd64 due to many int vs. string coding errors.
|
Number of commits found: 17 |
As an Amazon Associate I earn from qualifying purchases.