21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:20 Tobias C. Berner (tcberner) 

benchmarks: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Degtyarev
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Shevtsov <nyxo@dnuc.polyn.kiae.su>
  *  Andrey Zakhvatov <andy@FreeBSD.org>
  *  Andy Clark <andrewclarkii@gmail.com>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Brad Davis <brd@FreeBSD.org>
  *  Bruce A. Mah <bmah@FreeBSD.org>
  *  Chao Shin <quakelee@cn.freebsd.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@NUXI.com)
  *  Dima Sivachenko <dima@chg.ru>
  *  Gabriel M. Dutra <0xdutra@gmail.com>
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Hannes Hauswedell <h2+fbsdports@fsfe.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Eggert <lars@eggert.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  NAKAJI Hiroyuki <nakaji@jp.freebsd.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Radim Kolar
  *  Radim Kolar <hsn@sendmail.cz>
  *  Roman Bogorodskiy <bogorodskiy@inbox.ru>
  *  Scott Flatman <sf@dsinw.com>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Kandaurov <pluknet@gmail.com>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Slava Shwartsman <slavash@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Tom Judge <tom@tomjudge.com>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Will Andrews <andrews@technologist.com>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  arved
  *  asami
  *  dikshie <dikshie@lapi.itb.ac.id>
  *  gnn
  *  ijliao
  *  janos.mohacsi@bsd.hu
  *  jesper@jdn.dk
  *  jmz
  *  koshy
  *  luigi@FreeBSD.org
  *  mharo@FreeBSD.org
  *  mich@freebsdcluster.org
  *  mr
  *  se
  *  shalunov
  *  thierry@pompo.net
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  uminac

With hat:	portmgr

    86b2c51

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

17:50 novel 

- Fix plist [1]
- Drop maintainership

Reported by:	amdmi3 [1]

 

14:18 tijl 

Patch Makefile.in instead of Makefile.am to avoid USE_AUTOTOOLS

 

11:13 danfe 

Define LICENSE (GPLv2); reformat pkg-descr and kill bogus EOL whitespace.

 

11:08 danfe 

Unbreak the build under modern environments and cleanup Makefile while here.

 

22:40 adamw 

Mark BROKEN on FreeBSD 10 and above.

./Platoon.h:4:10: fatal error: 'list.h' file not found
#include <list.h>
         ^
1 error generated.
*** Error code 1

Stop.
make[1]: stopped in
/wrkdirs/usr/ports/benchmarks/dkftpbench/work/dkftpbench-0.45
*** Error code 1

 

11:21 olgeni 

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories A-C.

CR:		D196
Approved by:	portmgr (bapt)

 

09:00 ohauer 

cat astro / benchmarks
- USE_(BZIP2|XZ) -> USES=tar:(bzip2|xz)
- adjust BSDn License

 

15:52 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
benchmarks)

 

07:34 ade 

Sync to new bsd.autotools.mk

11:52 ade 

Punt autoconf267->autoconf268

18:35 ade 

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

00:57 ade 

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

04:47 linimon 

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

07:38 novel 

Use @freebsd.org address for my ports.

Approved by:    krion (mentor)

18:51 pav 

- Add ftp as secondary category

PR:             ports/73623
Submitted by:   Roman Bogorodskiy <bogorodskiy@inbox.ru> (maintainer)

18:45 krion 

Add dkftpbench 0.45,

dkftpbench is an FTP benchmark program inspired by SPECweb99. The
result of the benchmark is a number-of-simultaneous-users rating;
after running the benchmark properly, you have a good idea how many
simultaneous dialup clients a server can support. The target
bandwidth per client is set at 28.8 kilobits/second to model dialup
users; this is important for servers on the real Internet, which
often serve thousands of clients on only 10 MBits/sec of bandwidth.

PR:             ports/73006
Submitted by:   Roman Bogorodskiy <bogorodskiy@inbox.ru>