08:16 Baptiste Daroussin (bapt) 

MAN?PREFIX: eleminate its usage  and move man to share/man

    1b819e4

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:20 Tobias C. Berner (tcberner) 

benchmarks: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Degtyarev
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Shevtsov <nyxo@dnuc.polyn.kiae.su>
  *  Andrey Zakhvatov <andy@FreeBSD.org>
  *  Andy Clark <andrewclarkii@gmail.com>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Brad Davis <brd@FreeBSD.org>
  *  Bruce A. Mah <bmah@FreeBSD.org>
  *  Chao Shin <quakelee@cn.freebsd.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@NUXI.com)
  *  Dima Sivachenko <dima@chg.ru>
  *  Gabriel M. Dutra <0xdutra@gmail.com>
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Hannes Hauswedell <h2+fbsdports@fsfe.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Eggert <lars@eggert.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  NAKAJI Hiroyuki <nakaji@jp.freebsd.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Radim Kolar
  *  Radim Kolar <hsn@sendmail.cz>
  *  Roman Bogorodskiy <bogorodskiy@inbox.ru>
  *  Scott Flatman <sf@dsinw.com>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Kandaurov <pluknet@gmail.com>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Slava Shwartsman <slavash@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Tom Judge <tom@tomjudge.com>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Will Andrews <andrews@technologist.com>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  arved
  *  asami
  *  dikshie <dikshie@lapi.itb.ac.id>
  *  gnn
  *  ijliao
  *  janos.mohacsi@bsd.hu
  *  jesper@jdn.dk
  *  jmz
  *  koshy
  *  luigi@FreeBSD.org
  *  mharo@FreeBSD.org
  *  mich@freebsdcluster.org
  *  mr
  *  se
  *  shalunov
  *  thierry@pompo.net
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  uminac

With hat:	portmgr

    86b2c51

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

21:59 pi 

benchmarks/nuttcp: update 7.3.2 -> 8.2.2

- Improve warning when third party "-4/-6" is not supported
- Add af=inet/inet6 to verbose UDP output
- Add ip=<server_ip> to verbose UDP output for client transmitter
- Fix to pass "-4" or "-6" argument to 3rd party
- Fix to allow compile with -Werror=format-security as noted by
  Dhiru Kholia in fedora bug 1037224
- Fix missing brackets caught by -Wmisleading-indentation
- Add code to print out address family of connect/accept
- Add code to translate v4mapped addresses
- Fix to allow direct I/O on block devices
- Fix parsing of "-R i[s]##[/##]" (blank between 'R' and 'i')
- Updated Copyright notice for new year
- Changed nuttcp site to http://nuttcp.net/nuttcp/beta/
- Added define test for NOT_LINUX to undefine LINUX for build testing
- Add reporting of TCP congestion window
- Fix tos to work for ipv6 by setting traffic class

PR:		232484
Submitted by:	lev

 

19:20 pi 

benchmarks/nuttcp: fix distinfos

- and set LICENSE

PR:		219822
Submitted by:	xmj

 

14:26 mat 

Don't put things in WRKDIR, use NO_WRKSUBDIR.

Sponsored by:	Absolight

 

13:30 mat 

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

 

12:57 pi 

benchmarks/nuttcp: DISTFILES are (again?) available, remove BROKEN

 

17:29 bapt 

Mark as broken unfetchable ports

 

06:16 pi 

benchmarks/nuttcp: 6.1.2 -> 7.3.2

- take maintainer
- new distsite
- changes since 2008
  o Allow longer server info timeout for third party via --idle-data-timeout
  o Added feature to specify source port with "-p#:#" and "-P#:#"
  o Add "-g" option to specify multicast IP address to use
  o Clean up really confused transmit code for IPv4/IPv6 SSM multicast
  o Bug fix from Aristeu Rozanski:
    Crash caused by closing TCP_ADV_WIN_SCALE file even if open failed
  o Fix bug with server CPU affinity being parsed as %X instead of %d
    For non-sinkmode insure complete network block is written to stdout
    Above fixes nuttscp bug seen with --copy-dir getting premature EOF
  o Not every system has ERESTART added in 7.1.4, wrapped in ifdef
  o Fix non-Linux systems to properly count TCP retrans for multiple streams
  o Detect EOD for non-sinkmode UDP transfers
  o Suppress bogus warning when using maximum size UDP packet
  o Terminate non-sinkmode after specified file size with "-n" option
  o Allow multilink aggregation with "-N##m" option to work for receive
  o Add "-sz" zero copy option for non-sinkmode when input is a regular file
  o Remove "-Sf" forced server mode from Usage: statement
  o Fix zeroing of clientaddr6 during server cleanup
  o Fix freeaddrinfo() processing during cleanup
  o Change manually started oneshot server to have parent process just exit
  o Provide summary TCP retrans info for multi-stream TCP
  o Fix bug with retrans interval info when -fparse
  o Add "+stride" or "+n.n.n.n" syntax for multi-stream TCP (IPv4)
  o Fix third party bug with "-xc" option adding extraneous 't' character
  o Add optional client-side name resolution for third party host
  o Add "-N##m" option for multilink aggregation for multiple streams
  o Add "-xc#/#" and "-P#/#" options to Usage: statement
  o Enable jitter measurements with "-j" option
  o Enable one-way delay measurements with "-o" option
  o Fix bug with RTT and -fparse
  o Change ctl/data port checks to < 1024 instead of < 5000
  o Fix "--idle-data-timeout" Usage: statement for new default minimum
  o Improve transmit performance with "-i" by setting poll() timeout to 0
  o Don't output interval retrans info if non-sinkmode (for nuttscp)
  o Skip check for unACKed data at end of transfer if -DBROKEN_UNACKED
  o Play nice with iperf (change default data port to 5101)
  o Delay sending of server "OK" until after successful server bind()
  o Client check for server errors before starting data transfer
  o Continue checking for server output while draining client transmission
  o Correct "server not ACKing data" error message (server -> receiver)
  o Add "--packet-burst" option for Rob
  o Fix "--idle-data-timeout" Usage: statement for client
  o Improve accuracy of retrans info timing synchronization (client xmitter)
  o Allow rate limit to be exceeded temporarily by n packets ("-Rixxx/n")
  o Allow setting server CPU affinity from client via "-xcs" option
  o Allow setting client & server CPU affinity via third party
  o Allow passing of third party control port via "-Pctlport/ctlport3"
  o Up default idle data minimum to 15 sec to better handle net transients
  o Don't reset nstream until after last use (fix getaddrinfo() memory leak)
  o Fix bug with simultaneous server connections to manually started server
  o Fix Usage: statement: "--idle-data-timeout" both server & client option
  o Don't reset priority on server cleanup
  o Fix priority output for "-fparse"
  o Fix bad third party bug causing >= 1 minute transfers to silently fail
  o Fix Usage: statement: "--idle-data-timeout" not just a server option
  o Added IPv6 and SSM MC support
    Ported from Rob's 5.5.5 based code by Bill Fink
  o Fix client lockup with third party when network problem (for scripts)
  o Bugfix: set chk_idle_data on client (now also checks no data received)
  o Use argv[0] instead of "nuttcp" for third party
  o Bugfix: give error message again on error starting server
  o Timeout client accept() too and give nice error message (for scripts)

PR:	197475
Submitted by:	pi
Approved by:	Andrew Clark <andrewclarkii@gmail.com> (old maintainer)

 

09:00 ohauer 

cat astro / benchmarks
- USE_(BZIP2|XZ) -> USES=tar:(bzip2|xz)
- adjust BSDn License

 

01:24 bapt 

Support stage
Use options helpers
Use shebangfix

 

15:52 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
benchmarks)

 

08:15 az 

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

 

21:20 wxs 

Convert to new options.
Trim header.

PR:		ports/173560
Submitted by:	edward@rdtan.net
Approved by:	maintainer timeout

 

06:47 linimon 

Since this port conditionallly depends on perl, it needs WANT_PERL
defined before the inclusion of bsd.port.pre.mk.

Hat:            portmgr

19:03 miwi 

nuttcp is a network performance measurement tool intended for use
by network and system managers. Its most basic usage is to determine
the raw TCP (or UDP) network layer throughput by transferring memory
buffers from a source system across an interconnecting network to
a destination system, either transferring data for a specified time
interval, or alternatively transferring a specified number of bytes.

nuttcp is based on nttcp, but have several useful  features such
as a server mode, rate limiting, multiple parallel streams, and
timer based usage.

WWW: http://www.lcp.nrl.navy.mil/nuttcp/

PR:             ports/137876
Submitted by:   Andy Clark <andrewclarkii at gmail.com>