notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

FInally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combinatio for a given watch list. This is what FreshPorts will look for.

non port: cad/cura-engine/distinfo

Number of commits found: 7

Thursday, 4 Aug 2022
22:52 Diane Bruce (db) search for other commits by this committer
ports/cura: Update to 4.13.1

Major update to 4.13.1 not 4.12
I've said it before and I'll say it again. This port should be a
group effort but a cads porting team. I'd be happy to give
up Maintainership as my only interest with cura was to get it into
ports.

PR:		ports/255630
Reported by:	unrelentingtech <greg@unrelenting.technology>
Tested by:	trombik1973@gmail.com
commit hash: 0628704aae0c4d91e325b2d7d53dab04bcd2769a commit hash: 0628704aae0c4d91e325b2d7d53dab04bcd2769a commit hash: 0628704aae0c4d91e325b2d7d53dab04bcd2769a commit hash: 0628704aae0c4d91e325b2d7d53dab04bcd2769a 0628704
Saturday, 21 Nov 2020
00:33 db search for other commits by this committer
Update to 4.8

A few improvements from upstream
- More efficient triangle area calculation
- Calculate vSize(vap) only when needed
Original commitRevision:555802 
Saturday, 26 Sep 2020
19:53 db search for other commits by this committer
This patch updates Cura and all associated dependencies to 4.7.1.

Also, it adds math/py-numpy-stl - an optional dependency that makes
loading STL files much faster. Without it, Cura was complaining:

2020-09-20 02:19:31,877 - WARNING - [MainThread] STLReader.STLReader.<module>
[32]: Could not find numpy-stl, falling back to slower code.

I'm not sure where the 6.x version in cad/fdm_materials came from, seems
like now that project has its version in sync with the Cura version,
so I chose to increment PORTEPOCH for that. [Greg]

- fdm_materials adds some new materials usable with Cura
- I had to bump PORTEPOCH on a couple of ports
- py-numpy-stl was added on a separate commit
- Bump version checking in Cura on some dependancies
[db]

PR:		ports/249468
Submitted by:	greg@unrelenting.technology
Original commitRevision:550214 
Thursday, 26 Mar 2020
00:22 db search for other commits by this committer
- Maintainer timeout after 4 months take Maintainership
  Reported: 	2019-11-26 03:43 UTC by Kyle Evans
  Modified: 	2020-03-11 21:02 UTC (History)

Total new update to CuraEngine
Cura saw a major rewrite between 15.04 and 4.3.0, hence the need for
PORTEPOCH -- the changeset is too large to enumerate. At a minimum,
the new version solves some issues that users will see attempting to
slice .stl files created from newer Blender versions.

A new port, libArcus, is also included -- this is a prereq for the new
version of Cura and will also be needed for the UI if it's eventually ported.

PR:		ports/242242
Original commitRevision:529154 
Wednesday, 5 Aug 2015
15:36 robak search for other commits by this committer
cad/cura-engine: update 14.03 -> 15.04

- Drop obsolete GH_TAGNAME
- Remove pkg-plist and use PLIST_FILES

PR:		201692
Submitted by:	Tomek Cedro <cederom@tlen.pl> (maintainer)
Original commitRevision:393593 
Wednesday, 6 May 2015
15:16 mat search for other commits by this committer
Update ports in the [bcd]* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight
Original commitRevision:385521 
Friday, 8 Aug 2014
01:28 wg search for other commits by this committer
cad/cura-engine: Engine of slicing solution for RepRap 3D printers

The CuraEngine is a C++ console application for 3D printing GCode generation.
It has been made as better and faster alternative to the old Skeinforge engine.

The CuraEngine is pure C++ and uses Clipper from
http://www.angusj.com/delphi/clipper.php. There are no external dependences
and Clipper is included in the source code without modifications.

This is just a console application for GCode generation. For a full graphical
application look at https://github.com/daid/Cura with is the graphical
frontend for CuraEngine.

The CuraEngine can be used seperately or in other applications.
Feel free to add it to your application. But to take note of the License.

WWW: http://wiki.ultimaker.com/Cura

PR:		192486
Submitted by:	cederom tlen pl
Original commitRevision:364337 

Number of commits found: 7