22:52 Diane Bruce (db) 

ports/cura: Update to 4.13.1

Major update to 4.13.1 not 4.12
I've said it before and I'll say it again. This port should be a
group effort but a cads porting team. I'd be happy to give
up Maintainership as my only interest with cura was to get it into
ports.

PR:		ports/255630
Reported by:	unrelentingtech <greg@unrelenting.technology>
Tested by:	trombik1973@gmail.com

    0628704

16:25 db 

Finally update cura now that all prequisite ports are updated.

PR:		ports/251236

 

01:25 db 

the port uses USE_GITHUB=yes, yet the commit did not change GH_TAGNAME.
the package is still 4.7. as a proof, SHA256 in distinfo is identical.
confusingly, the version in "About" says "master", not 4.8 nor 4.7.
this PR should be reopened. (Tomoyuki Sakura)

Apparently I forgot to remove a line causing the wrong cura version
to be claimed as an update to 4.8
I think I have it right this time. Apologies I should have noticed.
I'll take the pointyhat and go sit in the corner.

PR:		ports/251236
Submitted by: 	sko@rostwald.de
Reported by:	trombik1973@gmail.com

 

19:53 db 

This patch updates Cura and all associated dependencies to 4.7.1.

Also, it adds math/py-numpy-stl - an optional dependency that makes
loading STL files much faster. Without it, Cura was complaining:

2020-09-20 02:19:31,877 - WARNING - [MainThread] STLReader.STLReader.<module>
[32]: Could not find numpy-stl, falling back to slower code.

I'm not sure where the 6.x version in cad/fdm_materials came from, seems
like now that project has its version in sync with the Cura version,
so I chose to increment PORTEPOCH for that. [Greg]

- fdm_materials adds some new materials usable with Cura
- I had to bump PORTEPOCH on a couple of ports
- py-numpy-stl was added on a separate commit
- Bump version checking in Cura on some dependancies
[db]

PR:		ports/249468
Submitted by:	greg@unrelenting.technology

 

00:03 db 

This is the new, shiny frontend for Cura. Check daid/LegacyCura for the
legacy Cura that everyone knows and loves/hates. We re-worked the
whole GUI code at Ultimaker, because the old code started to become
unmaintainable.

WWW: https://github.com/Ultimaker/Cura/wiki