| Port details on branch 2022Q3 |
- gplcver Verilog HDL simulator
- 2.12.a cad
 =0      2.12.aVersion of this port present on the latest quarterly branch. - There is no maintainer for this port.
- Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
- Port Added: 2005-12-29 03:53:04
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- License: GPLv2
- WWW:
- https://sourceforge.net/projects/gplcver/
- Description:
- GPL Cver is a full 1995 P1364 Verilog standard HDL simulator. It also
implements some of the 2001 P1364 standard features including all three
PLI interfaces (tf_, acc_ and vpi_) as defined in the 2001 Language
Reference Manual (LRM).
Verilog is the name for both a language for describing electronic hardware
called a hardware description language (HDL) and the name of the program
that simulates HDL circuit descriptions to verify that described circuits
will function correctly when the are constructed. Verilog is used only for
describing digital logic circuits. Other HDLs such as Spice are used for
describing analog circuits. There is an IEEE standard named P1364 that
standardizes the Verilog HDL and the behavior of Verilog simulators.
Verilog is officially defined in the IEEE P1364 Language Reference
Manual (LRM) that can be purchased from IEEE. There are many good books
for learning that teach the Verilog HDL and/or that teach digital circuit
design using Verilog.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- To install the port:
- cd /usr/ports/cad/gplcver/ && make install clean
- To add the package, run one of these commands:
- pkg install cad/gplcver
- pkg install gplcver
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: gplcver
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (gplcver-2.12a.src.tar.bz2) = f7d94677677f10c2d1e366eda2d01a652ef5f30d167660905c100f52f1a46e75
SIZE (gplcver-2.12a.src.tar.bz2) = 1224470
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- gmake>=4.3 : devel/gmake
- There are no ports dependent upon this port
Configuration Options:- ===> The following configuration options are available for gplcver-2.12.a:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
- Options name:
- cad_gplcver
- USES:
- tar:bzip2 gmake
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
As an Amazon Associate I earn from qualifying purchases.